Eleazar Anzola
Veteran
Joined: 17 Jul 2003
Posts: 1247
Location: Caracas / Venezuela
|
 Posted: Wed Oct 10, 2012 3:14 am Post subject: RC Futaba T7C Configurar en Gentoo (Abierto) |
 |
|
Hola a todos,
Tiempo sin postear por aquí,
Se me ha sucitado el pequeño inconveniente de hacer funcionar el RC Futaba T7C bajo Linux especificamente Gentoo y no he logrado tener exito.
En Windows con su cable USB funciona sin problemas, pero en Gentoo aunque reconoce el cable no logra hacer mover ningun control.
Aqui la salida de consola
| Code: | ls /dev/input/js*
/dev/input/js0
Bus 002 Device 003: ID 0401:0401 National Registry, Inc. |
Calibración:
| Code: |
jscal -c /dev/input/js0
Joystick has 5 axes and 3 buttons.
Correction for axis 0 is broken line, precision is 0.
Coeficients are: 112, 142, 5534751, 5534751
Correction for axis 1 is broken line, precision is 0.
Coeficients are: 112, 142, 5534751, 5534751
Correction for axis 2 is broken line, precision is 0.
Coeficients are: 112, 142, 5534751, 5534751
Correction for axis 3 is broken line, precision is 0.
Coeficients are: 112, 142, 5534751, 5534751
Correction for axis 4 is broken line, precision is 0.
Coeficients are: 112, 142, 5534751, 5534751
Calibrating precision: wait and don't touch the joystick.
Axis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisAxis 0: 2, 2 Axis 1: 0, 0 Axis 2: 0, 0 Axis 3: 128, 128 AxisDone. Precision is:
Axis: 0: 0
Axis: 1: 0
Axis: 2: 0
Axis: 3: 0
Axis: 4: 0
Move axis 0 to minimum position and push any button.
Axis 0: 2
|
Pide mover y pulsar cualquier boton, pero no hace nada de nada
Agradeceria si alguien que lo conozca y pueda darme luces me de una mano con esto, es que quiero usarlo con crrcsim y hacer practicas antes de salir al campo con mi recien construido Guppy. Ver Imagen aquí
_________________
Salu2
Eleazar Anzola
Linux User : # 216232
__________________________________________
Por un foro ordenado y un buscador más útil:
[TEMA] Descripción problema (estado) |
|
Spanish
