| View previous topic :: View next topic |
| Author |
Message |
gsom
n00b
Joined: 07 Mar 2012
Posts: 15
|
 Posted: Tue Mar 13, 2012 9:15 pm Post subject: Epson Perfection V10\V100 driver (iscan-plugin-gt-s600) |
 |
|
Some time ago I have found iscan plugin ebuild for Epson Perfection V10\V100 (GT-S600) somewhere in the internet. Its version was 2.1.0. After upgrading of hardware (MB, CPU etc) my scanner began to scan with colour horizontal stripes on images. I've found that it's corrected in version 2.1.2 of iscan plugin. So I've updated ebuild to install 2.1.2 version.
I don't know where such ebuilds should come (I'm not sure that I want maintain it), but I think it will be usefull for somebody. So here it is:
iscan-plugin-gt-s600-2.1.2.ebuild:
| Code: | # Copyright 1999-2009 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $
EAPI="2"
inherit rpm
# Revision used by upstream
SRC_REV="1"
MY_P="${P}-${SRC_REV}"
DESCRIPTION="Epson Perfection V10/V100 PHOTO scanner plugin for SANE 'epkowa' backend."
HOMEPAGE="http://www.avasys.jp/english/linux_e/dl_scan.html"
SRC_URI="
x86? ( http://linux.avasys.jp/drivers/iscan-plugins/iscan-plugin-gt-s600/${PV}/${MY_P}.i386.rpm )
amd64? ( http://linux.avasys.jp/drivers/iscan-plugins/iscan-plugin-gt-s600/${PV}/${MY_P}.x86_64.rpm )"
LICENSE="AVASYS Public License"
SLOT="0"
KEYWORDS="~x86 ~amd64"
IUSE=""
IUSE_LINGUAS="ja"
for X in ${IUSE_LINGUAS}; do IUSE="${IUSE} linguas_${X}"; done
DEPEND=">=media-gfx/iscan-2.18.0"
RDEPEND="${DEPEND}"
MY_LIB="/usr/$(get_libdir)"
src_install() {
# install scanner firmware
insinto /usr/share/iscan
doins "${WORKDIR}"/usr/share/iscan/*
# install docs
if use linguas_ja; then
dodoc usr/share/doc/"${P}"/AVASYSPL.ja.txt
else
dodoc usr/share/doc/"${P}"/AVASYSPL.en.txt
fi
# install scanner plugins
insinto "${MY_LIB}"/iscan
INSOPTIONS="-m0755"
doins "${WORKDIR}"/usr/$(get_libdir)/iscan/libesint66.so.2.0.1
dosym libesint66.so.2.0.1 /usr/$(get_libdir)/iscan/libesint66.so.2
dosym libesint66.so.2.0.1 /usr/$(get_libdir)/iscan/libesint66.so
}
pkg_postinst() {
# Needed for scaner to work properly.
iscan-registry --add interpreter usb 0x04b8 0x012d ${MY_LIB}/iscan/libesint66 /usr/share/iscan/esfw66.bin
elog
elog "Firmware file esfw66.bin for Epson Perfection V10 /"
elog "V100 PHOTO has been installed in /usr/share/iscan and"
elog "registered for use"
elog
}
pkg_prerm() {
# Uninstall interpreter from iscan-registry before removal
iscan-registry --remove interpreter usb 0x04b8 0x012d ${MY_LIB}/iscan/libesint66 /usr/share/iscan/esfw66.bin
}
|
I will be glad for any corrections. |
|
| Back to top |
|
 |
vokiel
n00b
Joined: 01 Oct 2004
Posts: 27
|
| Posted: Mon Oct 01, 2012 7:25 pm Post subject: |
|
|
I can confirm the ebuild works perfectly. Thank you very much, this is greatly appreciated.
If anyone wants to use it I recommend setting a local portage overlay with layman and copy the ebuild in your own media-gfx/iscan-plugin-gt-s600 path. The URLs in the ebuild for the rpm(s) may change by the time you read this message, but that shouldn't be too hard to adjust.
http://en.gentoo-wiki.com/wiki/Overlay#Local_Overlays
The firmware with the necessary plugin can be obtained manually (and the updated urls if necessary) at:
http://www.avasys.jp/lx-bin2/linux_e/scan/DL1.do
Edit:
Before I forget, I'm working with the masked iscan. The same version that is available from avasys (2.28.1.3)
e.g. in /etc/portage/package.keywords:
| Code: | | media-gfx/iscan ~amd64 |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
