View previous topic :: View next topic |
Author |
Message |
Kurogane n00b
Joined: 23 May 2010 Posts: 44
|
Posted: Mon Sep 24, 2012 8:31 pm Post subject: Network issue |
|
|
Hi folks.
I'm having problem to setup my network
Here's the scenario:
/etc/conf.d/net
Code: | config_eth0="172.16.77.42/24"
|
route -n
Code: | # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
172.16.77.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
|
Code: | ping -c5 172.16.0.254
PING 172.16.0.254 (172.16.0.254) 56(84) bytes of data.
64 bytes from 172.16.0.254: icmp_req=1 ttl=64 time=0.363 ms
64 bytes from 172.16.0.254: icmp_req=2 ttl=64 time=0.215 ms
64 bytes from 172.16.0.254: icmp_req=3 ttl=64 time=0.201 ms
64 bytes from 172.16.0.254: icmp_req=4 ttl=64 time=0.243 ms
64 bytes from 172.16.0.254: icmp_req=5 ttl=64 time=0.260 ms
--- 172.16.0.254 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.201/0.256/0.363/0.058 ms
|
If i have this configure i can ping my network, but i dont have internet because i can't add gateway with this configuration becuase /24, if i try to add manually my gw give me this error
Code: | # ip route add 172.16.0.0/16 via 172.16.0.254 dev eth0
RTNETLINK answers: No such process |
If i add this config
/etc/conf.d/net
Code: | config_eth0="172.16.77.42/16"
|
Code: | # ip route add 172.16.0.0/16 via 172.16.0.254 dev eth0 |
route -n
Code: | # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
172.16.0.0 172.16.0.254 255.255.255.0 UG 0 0 0 eth1
172.16.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
|
Code: | # ping -c5 172.16.0.254
PING 172.16.0.254 (172.16.0.254) 56(84) bytes of data.
From 172.16.77.42: icmp_seq=1 Destination Host Unreachable
From 172.16.77.42: icmp_seq=2 Destination Host Unreachable
From 172.16.77.42: icmp_seq=3 Destination Host Unreachable
From 172.16.77.42: icmp_seq=4 Destination Host Unreachable
From 172.16.77.42: icmp_seq=5 Destination Host Unreachable
--- 172.16.0.254 ping statistics ---
5 packets transmitted, 0 received, +5 errors, 100% packet loss, time 4002ms
pipe 4
|
I can add gw but i can't ping my network so i don't know what i do wrong? |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 24, 2012 10:45 pm Post subject: |
|
|
oops _________________ Defund the FCC.
Last edited by DONAHUE on Mon Sep 24, 2012 10:47 pm; edited 1 time in total |
|
Back to top |
|
|
wcg Guru
Joined: 06 Jan 2009 Posts: 588
|
Posted: Mon Sep 24, 2012 10:46 pm Post subject: |
|
|
I have this in /etc/conf.d/net:
Code: |
routes_eth0="default via [inside ip address of router on my lan]"
|
At boot, the system enables a default route through that ip address.
Do you not have this in your /etc/conf.d/net file? _________________ TIA |
|
Back to top |
|
|
Mad Merlin Veteran
Joined: 09 May 2005 Posts: 1155
|
Posted: Tue Sep 25, 2012 4:20 am Post subject: Re: Network issue |
|
|
Kurogane wrote: | Hi folks.
I'm having problem to setup my network
Here's the scenario:
/etc/conf.d/net
Code: | config_eth0="172.16.77.42/24"
|
route -n
Code: | # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
172.16.77.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
|
Code: | ping -c5 172.16.0.254
PING 172.16.0.254 (172.16.0.254) 56(84) bytes of data.
64 bytes from 172.16.0.254: icmp_req=1 ttl=64 time=0.363 ms
64 bytes from 172.16.0.254: icmp_req=2 ttl=64 time=0.215 ms
64 bytes from 172.16.0.254: icmp_req=3 ttl=64 time=0.201 ms
64 bytes from 172.16.0.254: icmp_req=4 ttl=64 time=0.243 ms
64 bytes from 172.16.0.254: icmp_req=5 ttl=64 time=0.260 ms
--- 172.16.0.254 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.201/0.256/0.363/0.058 ms
|
If i have this configure i can ping my network, but i dont have internet because i can't add gateway with this configuration becuase /24, if i try to add manually my gw give me this error
Code: | # ip route add 172.16.0.0/16 via 172.16.0.254 dev eth0
RTNETLINK answers: No such process |
|
Your ping here shouldn't work, you don't have a default route and you don't have any routes to reach 172.16.0.254 with. Additionally, I would expect the route add to fail, again, because you don't have a route to the suggested gateway.
When you do this:
Code: |
config_eth0="172.16.77.42/16"
|
172.16.0.254 becomes directly routable and you can ping it without adding additional routes. If you are in fact on a /16 subnet, then this is what you should do, no additional routing necessary. _________________ Game! - Where the stick is mightier than the sword! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|