Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Sound Blaster Audigy(CA0106) - no sound in gentoo
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
bigbangnet
Apprentice
Apprentice


Joined: 11 Jun 2007
Posts: 174

PostPosted: Fri Feb 03, 2012 2:13 pm    Post subject: Sound Blaster Audigy(CA0106) - no sound in gentoo Reply with quote

First I'm not at home so replies with info will be useless ...untill later on. Just wanna get an idea to what's going on.

problem: I got a sound blaster audigy which works perfectly...in windows. It also worked in gentoo but I decided to reinstall fresh (try some new stuff :wink: ). Since the new reinstallation for some reason i got no sound. The previous installation I had some sound and there was no problem whatsoever.

I followed the guide (Gentoo Linux ALSA Guide). I compiled the alsa in the kernel (NOT using M beside alsa and other things in the kernel), I checked my sound blaster audigy (ca0106) and other stuff that it specify in the guide but using the * (built-in instead of Module).

At the end of the guide, I did alsaconf and the "wizard" didn`t see my card...not even a legacy card., I did alsamixer after and nothing is muted. So what I did was put MODULE in the kernel where alsa is located including my PCI sound card too. recompiled the kernel, reboot to the new kernel . The odd thing started after I put MODULE in the kernel and booted in it. now when I dd alsaconf I could see my card as ca0106, alsamixer had the same results, no muting and no sound. in gnome, i double clicked on the sound icon and i can see the name of my card in the hardware tab nothing is muted too.

I can't paste any info yet but I remember at least the lspci which states I got a creative sound blaster type of card and seeing ca0106.

Any idea to what's going on here ?
_________________
I'm a noob, be gentle with me. TEACH ME
Back to top
View user's profile Send private message
bigbangnet
Apprentice
Apprentice


Joined: 11 Jun 2007
Posts: 174

PostPosted: Sat Feb 04, 2012 12:27 am    Post subject: Reply with quote

Here is some info that might help.
Just to be clear right now my sound in built as modules in my kernel. I got alsa in my use flag in make.conf. Besides that the odd thing is I can't see any error messages when I try to play a sound anywhere in gentoo. Just no sound..it's plain weird for me. Also If I do modprobe snd-ca0106 no error message appears.

To note: my sound is not mute. I see 00 in alsamixer.


Theres lots of informatin ahead so sorry about that :) I hope someone can help me with this one
alsa-info.txt output:
Code:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################

!!Script ran on: Sat Feb  4 00:24:39 UTC 2012


!!Linux Distribution
!!------------------

Gentoo Base System release 2.0.3


!!DMI Information
!!---------------

Manufacturer:      BIOSTAR Group
Product Name:      N61PC-M2S
Product Version:   


!!Kernel Information
!!------------------

Kernel release:    3.2.1-gentoo-r2
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         AMD Phenom(tm) 9650 Quad-Core Processor
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     1.0.24
Library version:    1.0.24.1
Utilities version:  1.0.24.2


!!Loaded ALSA modules
!!-------------------

snd_ca0106


!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - Yes

ESound Daemon:
      Installed - Yes (/usr/bin/esd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [CA0106         ]: CA0106 - CA0106
                      Audigy SE [SB0570] at 0xcc00 irq 18


!!PCI Soundcards installed in the system
!!--------------------------------------

01:06.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------

01:06.0 0401: 1102:0007
   Subsystem: 1102:100a


!!Loaded sound module options
!!--------------------------

!!Module: snd_ca0106
   enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
   id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
   index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
   subsystem : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0


!!ALSA Device nodes
!!-----------------

crw-rw----+ 1 root audio 116, 11 Feb  3 11:56 /dev/snd/controlC0
crw-rw----+ 1 root audio 116,  2 Feb  3 11:56 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 10 Feb  3 17:03 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116,  9 Feb  3 17:03 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116,  8 Feb  3 11:56 /dev/snd/pcmC0D1c
crw-rw----+ 1 root audio 116,  7 Feb  3 16:57 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116,  6 Feb  3 11:56 /dev/snd/pcmC0D2c
crw-rw----+ 1 root audio 116,  5 Feb  3 16:57 /dev/snd/pcmC0D2p
crw-rw----+ 1 root audio 116,  4 Feb  3 11:56 /dev/snd/pcmC0D3c
crw-rw----+ 1 root audio 116,  3 Feb  3 16:57 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116,  1 Feb  3 16:56 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Feb  3 11:56 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root  60 Feb  3 11:56 .
drwxr-xr-x 3 root root 300 Feb  3 11:56 ..
lrwxrwxrwx 1 root root  12 Feb  3 11:56 pci-0000:01:06.0 -> ../controlC0


nano -w /etc/modprobe.d/alsa.conf
Code:
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.

# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.24.2 ---
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-ca0106
alias sound-slot-0 snd-ca0106
# --- END: Generated by ALSACONF, do not edit. ---


lspci -v | grep -i audio
Code:
01:06.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster


LSMOD:
Code:
 lsmod
Module                  Size  Used by
snd_seq_midi            4848  0
snd_seq_dummy           1311  0
snd_seq_oss            27044  0
snd_seq_midi_event      5252  2 snd_seq_midi,snd_seq_oss
snd_seq                47878  6 snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            37497  0
snd_mixer_oss          14489  1 snd_pcm_oss
snd_ca0106             33624  2
snd_rawmidi            18059  2 snd_seq_midi,snd_ca0106
snd_seq_device          4953  5 snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd_ac97_codec        109090  1 snd_ca0106
ac97_bus                1118  1 snd_ac97_codec
snd_pcm                71197  3 snd_pcm_oss,snd_ca0106,snd_ac97_codec
snd_timer              18025  2 snd_seq,snd_pcm
snd                    53472  14 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_ca0106,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore               5265  1 snd
snd_page_alloc          6841  2 snd_ca0106,snd_pcm





/etc/init.d/alsasound restart
Code:


 * Loading ALSA modules ...
 *   Loading: snd-card-0 ...                                              [ ok ]
 * Restoring Mixer Levels ...                                             [ ok ]



RC-UPDATE OUTPUT:
Code:

rc-update
            alsasound | boot default                 
             bootmisc | boot                         
                 dbus |      default                 
                devfs |                       sysinit
                dmesg |                       sysinit
                 fsck | boot                         
             hostname | boot                         
              hwclock | boot                         
              keymaps | boot                         
            killprocs |              shutdown       
                local |      default                 
           localmount | boot                         
              modules | boot                         
             mount-ro |              shutdown       
                 mtab | boot                         
             net.eth0 |      default                 
               net.lo | boot                         
             netmount |      default                 
               procfs | boot                         
                 root | boot                         
            savecache |              shutdown       
                 sshd |      default                 
                 swap | boot                         
               sysctl | boot                         
            syslog-ng |      default                 
         termencoding | boot                         
                 udev |      default          sysinit
       udev-postmount |      default                 
              urandom | boot                         
           vixie-cron |      default                 
                  xdm |      default 


rc.log:
Code:

rc default logging started at Fri Feb  3 16:55:57 2012

 * Starting D-BUS system messagebus ...
 [ ok ]
 * Mounting network filesystems ...
 [ ok ]
 * Setting up gdm ...
 [ ok ]
 * Starting syslog-ng ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
 * Doing udev cleanups
 * Starting vixie-cron ...
 [ ok ]
 * Starting local
 [ ok ]

rc default logging stopped at Fri Feb  3 16:56:02 2012


rc shutdown logging started at Fri Feb  3 16:56:18 2012

 * Stopping local
 [ ok ]
 * Stopping vixie-cron ...
 [ ok ]
 * Saving random seed ...
 [ ok ]
 * Deactivating swap devices ...
 [ ok ]
 * Stopping sshd ...
 [ ok ]
 * Stopping syslog-ng ...
 [ ok ]
 * Storing ALSA Mixer Levels ...
 [ ok ]
 * Stopping gdm ...
 [ ok ]
 * Unmounting network filesystems ...
 [ ok ]
 * Stopping D-BUS system messagebus ...
 [ ok ]
 * Unmounting loop devices
 * Unmounting filesystems
 *   Unmounting /boot ...
 [ ok ]
 * Stopping udev ...
 [ ok ]

rc shutdown logging stopped at Fri Feb  3 16:56:20 2012


rc boot logging started at Fri Feb  3 11:56:55 2012

 * Setting system clock using the hardware clock [Local Time] ...
 [ ok ]
 * Loading module nouveau ...
 [ ok ]
 * Autoloaded 1 module(s)
 * Checking local filesystems  ...
/dev/sda3: clean, 352160/9740288 files, 6732919/38940032 blocks
/dev/sda1: clean, 36/32768 files, 24797/131072 blocks
 [ ok ]
 * Remounting root filesystem read/write ...
 [ ok ]
 * Updating /etc/mtab ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
 * Creating user login records ...
 [ ok ]
 * Cleaning /var/run ...
 [ ok ]
 * Wiping /tmp directory ...
 [ ok ]
 * Loading ALSA modules ...
 *   Loading: snd-card-0 ...
 [ ok ]
 *   Loading: snd-mixer-oss ...
 [ ok ]
 *   Loading: snd-pcm-oss ...
 [ ok ]
 *   Loading: snd-seq-oss ...
 [ ok ]
 *   Loading: snd-seq-midi ...
 [ ok ]
 [ ok ]
 * Restoring Mixer Levels ...
 [ ok ]
 * Setting hostname to tux ...
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [us] ...
 [ ok ]
 * Bringing up interface lo
 *   127.0.0.1/8 ...
 [ ok ]
 *   Adding routes
 *     127.0.0.0/8 via 127.0.0.1 ...
 [ ok ]
 * Bringing up interface eth0
 *   dhcp ...
 *     Running udhcpc ...
No resolv.conf for interface eth0
 [ ok ]
 *     received address 192.168.1.102/24
 [ ok ]
 * Mounting USB device filesystem [usbfs] ...
 [ ok ]
 * Mounting misc binary format filesystem ...
 [ ok ]
 * Loading custom binary format handlers ...
 [ ok ]
 * Activating swap devices ...
 [ ok ]
 * Initializing random number generator ...
 [ ok ]

rc boot logging stopped at Fri Feb  3 16:56:59 2012


rc default logging started at Fri Feb  3 16:56:59 2012

 * Starting D-BUS system messagebus ...
 [ ok ]
 * Mounting network filesystems ...
 [ ok ]
 * Setting up gdm ...
 [ ok ]
 * Starting syslog-ng ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
 * Doing udev cleanups
 * Starting vixie-cron ...
 [ ok ]
 * Starting local
 [ ok ]

rc default logging stopped at Fri Feb  3 16:57:03 2012



dmesg log:
[code]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.1-gentoo-r2 (root@tux) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #6 SMP Fri Feb 3 00:29:19 EST 2012
[ 0.000000] Command line: root=/dev/sda3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: BIOSTAR Group N61PC-M2S/N61PC-M2S, BIOS 6.00 PG 09/03/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f3a00] f3a00
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfee0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @ bfedf000-bfee0000
[ 0.000000] ACPI: RSDP 00000000000f7e30 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 00000000bfee3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP 00000000bfee3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000bfee3100 058B6 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfee0000 00040
[ 0.000000] ACPI: SSDT 00000000bfee8a80 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000bfee9000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 00000000bfee9040 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC 00000000bfee89c0 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfee0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765728 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88013fc00000 s75968 r8192 d22336 u524288
[ 0.000000] pcpu-alloc: s75968 r8192 d22336 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027690
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3982612k/5242880k available (6652k kernel code, 1050180k absent, 210088k reserved, 4164k data, 624k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2310.678 MHz processor.
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4621.35 BogoMIPS (lpj=2310678)
[ 0.001194] pid_max: default: 32768 minimum: 301
[ 0.002022] Security Framework initialized
[ 0.002119] SELinux: Initializing.
[ 0.002218] SELinux: Starting in permissive mode
[ 0.002562] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004436] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005252] Mount-cache hash table entries: 256
[ 0.005489] Initializing cgroup subsys cpuacct
[ 0.005583] Initializing cgroup subsys freezer
[ 0.005701] tseg: 00bff00000
[ 0.005703] CPU: Physical Processor ID: 0
[ 0.005794] CPU: Processor Core ID: 0
[ 0.005888] mce: CPU supports 6 MCE banks
[ 0.005990] using AMD E400 aware idle routine
[ 0.006049] ACPI: Core revision 20110623
[ 0.009598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019969] CPU0: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03
[ 0.020998] Performance Events: AMD PMU driver.
[ 0.020998] ... version: 0
[ 0.020998] ... bit width: 48
[ 0.020998] ... generic registers: 4
[ 0.020998] ... value mask: 0000ffffffffffff
[ 0.020998] ... max period: 00007fffffffffff
[ 0.020998] ... fixed-purpose events: 0
[ 0.020998] ... event mask: 000000000000000f
[ 0.020998] MCE: In-kernel MCE decoding enabled.
[ 0.021087] Booting Node 0, Processors #1
[ 0.021169] smpboot cpu 1: start_ip = 9a000
[ 0.093047] #2
[ 0.093088] smpboot cpu 2: start_ip = 9a000
[ 0.165040] #3 Ok.
[ 0.165132] smpboot cpu 3: start_ip = 9a000
[ 0.236977] Brought up 4 CPUs
[ 0.237071] Total of 4 processors activated (18485.18 BogoMIPS).
[ 0.238131] PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
[ 0.238166] RTC time: 16:56:49, date: 02/03/12
[ 0.239012] NET: Registered protocol family 16
[ 0.239120] kworker/u:0 used greatest stack depth: 5512 bytes left
[ 0.239246] node 0 link 0: io port [9000, ffff]
[ 0.239246] TOM: 00000000c0000000 aka 3072M
[ 0.239246] Fam 10h mmconf [f0000000, f00fffff]
[ 0.239246] node 0 link 0: mmio [a0000, bffff]
[ 0.239246] node 0 link 0: mmio [c0000000, efffffff]
[ 0.239246] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.239246] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000, f03fffff]
[ 0.239246] TOM2: 0000000140000000 aka 5120M
[ 0.239246] bus: [00, 04] on node 0 link 0
[ 0.239246] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.239246] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.239246] bus: 00 index 2 [mem 0xc0000000-0xefffffff]
[ 0.239246] bus: 00 index 3 [mem 0xf0400000-0xffffffff]
[ 0.239246] bus: 00 index 4 [mem 0xf0100000-0xf03fffff]
[ 0.239246] bus: 00 index 5 [mem 0x140000000-0xfcffffffff]
[ 0.239246] Extended Config Space enabled on 1 nodes
[ 0.239994] ACPI: bus type pci registered
[ 0.240118] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.240143] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.245792] PCI: Using configuration type 1 for base access
[ 0.253845] bio: create slab <bio-0> at 0
[ 0.254012] ACPI: Added _OSI(Module Device)
[ 0.254075] ACPI: Added _OSI(Processor Device)
[ 0.254169] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.254264] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.255393] ACPI: EC: Look up EC in DSDT
[ 0.258440] ACPI: Interpreter enabled
[ 0.258536] ACPI: (supports S0 S1 S4 S5)
[ 0.258796] ACPI: Using IOAPIC for interrupt routing
[ 0.265088] ACPI: No dock devices found.
[ 0.265972] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.266859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.268178] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.268276] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.268366] pci_root PNP0A08:00: host bridge window [io 0x9000-0xffff]
[ 0.268455] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.268551] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80]
[ 0.268647] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff]
[ 0.268785] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.268919] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff]
[ 0.268970] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff]
[ 0.269137] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
[ 0.269287] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
[ 0.269300] pci 0000:00:01.0: reg 18: [io 0x1d00-0x1dff]
[ 0.269326] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[ 0.269337] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.269352] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.269357] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.269376] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.269381] pci 0000:00:01.1: PME# disabled
[ 0.269391] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[ 0.269430] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[ 0.269439] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.269468] pci 0000:00:02.0: supports D1 D2
[ 0.269469] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269472] pci 0000:00:02.0: PME# disabled
[ 0.269483] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[ 0.269493] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.269526] pci 0000:00:02.1: supports D1 D2
[ 0.269528] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269531] pci 0000:00:02.1: PME# disabled
[ 0.269548] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[ 0.269580] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[ 0.269601] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.269628] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[ 0.269638] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.269642] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
[ 0.269667] pci 0000:00:07.0: supports D1 D2
[ 0.269669] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269673] pci 0000:00:07.0: PME# disabled
[ 0.269684] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[ 0.269692] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.269696] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.269700] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.269704] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.269708] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
[ 0.269713] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.269741] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[ 0.269760] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269763] pci 0000:00:09.0: PME# disabled
[ 0.269776] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[ 0.269795] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269797] pci 0000:00:0b.0: PME# disabled
[ 0.269809] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[ 0.269829] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269831] pci 0000:00:0c.0: PME# disabled
[ 0.269849] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.269864] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.269977] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.269991] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.270006] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.270048] pci 0000:01:06.0: [1102:0007] type 0 class 0x000401
[ 0.270060] pci 0000:01:06.0: reg 10: [io 0xcc00-0xcc1f]
[ 0.270104] pci 0000:01:06.0: supports D1 D2
[ 0.270131] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.270229] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
[ 0.270232] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.270235] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.270238] pci 0000:00:04.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.270240] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.270242] pci 0000:00:04.0: bridge window [io 0x9000-0xffff] (subtractive decode)
[ 0.270245] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.270248] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80] (subtractive decode)
[ 0.270251] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
[ 0.270253] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.270256] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
[ 0.270258] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
[ 0.270291] pci 0000:02:00.0: [10de:0615] type 0 class 0x000300
[ 0.270302] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.270315] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.270327] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.270335] pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.270344] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.271977] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.272067] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
[ 0.272069] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.272073] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.272092] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.272182] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
[ 0.272191] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.272194] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.272213] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.272303] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff]
[ 0.272312] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.272315] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.272324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.272592] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.272812] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.272948] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.288011] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289089] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.290327] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[ 0.290789] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.291356] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.291986] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.292569] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.293083] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
[ 0.293549] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.294204] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.294794] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.295274] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.295738] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.296317] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.296910] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.297386] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.297849] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.298437] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.298910] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.299545] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.299888] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.300223] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.300529] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.300871] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.301215] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.301553] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.301897] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[ 0.302221] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, disabled.
[ 0.302641] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.303019] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 0.303396] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
[ 0.303803] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0, disabled.
[ 0.304221] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
[ 0.304601] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.305009] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.305426] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.305848] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
[ 0.306143] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0, disabled.
[ 0.306466] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.306466] vgaarb: loaded
[ 0.306466] vgaarb: bridge control possible 0000:02:00.0
[ 0.306997] SCSI subsystem initialized
[ 0.307081] libata version 3.00 loaded.
[ 0.307081] usbcore: registered new interface driver usbfs
[ 0.307094] usbcore: registered new interface driver hub
[ 0.307094] usbcore: registered new device driver usb
[ 0.308006] wmi: Mapper loaded
[ 0.308057] PCI: Using ACPI for IRQ routing
[ 0.309754] PCI: pci_cache_line_size set to 64 bytes
[ 0.309765] pci 0000:00:01.0: no compatible bridge window for [io 0x1d00-0x1dff]
[ 0.309945] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.309948] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
[ 0.310029] NetLabel: Initializing
[ 0.310076] NetLabel: domain hash size = 128
[ 0.310170] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.310274] NetLabel: unlabeled traffic allowed by default
[ 0.310373] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.310474] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.310713] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.316064] Switching to clocksource hpet
[ 0.321977] pnp: PnP ACPI init
[ 0.322088] ACPI: bus type pnp registered
[ 0.322887] pnp 00:00: [bus 00-04]
[ 0.322889] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.322891] pnp 00:00: [io 0x0000-0x03af window]
[ 0.322893] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.322895] pnp 00:00: [io 0x9000-0xffff window]
[ 0.322897] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.322899] pnp 00:00: [io 0x1c00-0x1c80 window]
[ 0.322901] pnp 00:00: [mem 0xfec80000-0xfecbffff window]
[ 0.322903] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.322905] pnp 00:00: [mem 0xc0000000-0xefffffff window]
[ 0.322907] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[ 0.322909] pnp 00:00: [mem 0x00000000 window]
[ 0.323029] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.323089] pnp 00:01: [io 0x1000-0x107f]
[ 0.323090] pnp 00:01: [io 0x1080-0x10ff]
[ 0.323092] pnp 00:01: [io 0x1400-0x147f]
[ 0.323094] pnp 00:01: [io 0x1480-0x14ff]
[ 0.323095] pnp 00:01: [io 0x1800-0x187f]
[ 0.323097] pnp 00:01: [io 0x1880-0x18ff]
[ 0.323099] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.323101] pnp 00:01: [io 0x2000-0x207f]
[ 0.323103] pnp 00:01: [io 0x2080-0x20ff]
[ 0.323198] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.323291] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.323380] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.323470] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.323565] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.323660] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.323762] system 00:01: [io 0x2000-0x207f] has been reserved
[ 0.323853] system 00:01: [io 0x2080-0x20ff] has been reserved
[ 0.323951] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.323991] pnp 00:02: [io 0x0010-0x001f]
[ 0.323993] pnp 00:02: [io 0x0022-0x003f]
[ 0.323995] pnp 00:02: [io 0x0044-0x005f]
[ 0.323996] pnp 00:02: [io 0x0062-0x0063]
[ 0.323998] pnp 00:02: [io 0x0065-0x006f]
[ 0.324000] pnp 00:02: [io 0x0074-0x007f]
[ 0.324014] pnp 00:02: [io 0x0091-0x0093]
[ 0.324016] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.324017] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.324019] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.324021] pnp 00:02: [io 0x0800-0x087f]
[ 0.324023] pnp 00:02: [io 0x0290-0x029f]
[ 0.324024] pnp 00:02: [io 0x0290-0x0297]
[ 0.324029] pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.324175] pnp 00:02: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.324313] pnp 00:02: disabling [io 0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.324457] pnp 00:02: disabling [io 0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.324600] pnp 00:02: disabling [io 0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.324743] pnp 00:02: disabling [io 0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.324886] pnp 00:02: disabling [io 0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.325041] pnp 00:02: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.325179] pnp 00:02: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 0.325404] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.325494] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.325591] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.325680] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.325775] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.325793] pnp 00:03: [dma 4]
[ 0.325795] pnp 00:03: [io 0x0000-0x000f]
[ 0.325796] pnp 00:03: [io 0x0080-0x0090]
[ 0.325798] pnp 00:03: [io 0x0094-0x009f]
[ 0.325800] pnp 00:03: [io 0x00c0-0x00df]
[ 0.325869] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.325915] pnp 00:04: [irq 0 disabled]
[ 0.325932] pnp 00:04: [irq 8]
[ 0.325934] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[ 0.326000] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.326036] pnp 00:05: [io 0x0070-0x0073]
[ 0.326101] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.326108] pnp 00:06: [io 0x0061]
[ 0.326180] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.326187] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.326195] pnp 00:07: [irq 13]
[ 0.326259] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.326572] pnp 00:08: [io 0x0060]
[ 0.326574] pnp 00:08: [io 0x0064]
[ 0.326582] pnp 00:08: [irq 1]
[ 0.326646] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.327158] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[ 0.327257] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.327355] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327434] pnp 00:0a: [mem 0x000f0000-0x000fffff]
[ 0.327436] pnp 00:0a: [mem 0xfeff0000-0xfeff00ff]
[ 0.327437] pnp 00:0a: [mem 0xbfee0000-0xbfefffff]
[ 0.327439] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.327441] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.327443] pnp 00:0a: [mem 0x00100000-0xbfedffff]
[ 0.327446] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.327448] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.327450] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.327452] pnp 00:0a: [mem 0xfefff000-0xfeffffff]
[ 0.327453] pnp 00:0a: [mem 0xfff80000-0xfff80fff]
[ 0.327455] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.327457] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
[ 0.327558] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.327656] system 00:0a: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.327746] system 00:0a: [mem 0xbfee0000-0xbfefffff] could not be reserved
[ 0.327842] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.327937] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.328044] system 00:0a: [mem 0x00100000-0xbfedffff] could not be reserved
[ 0.328134] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.328225] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.328320] system 00:0a: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.328416] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.328512] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.328607] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.328709] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.328719] pnp: PnP ACPI: found 11 devices
[ 0.328813] ACPI: ACPI bus type pnp unregistered
[ 0.333616] PCI: max bus depth: 1 pci_try_num: 2
[ 0.333634] pci 0000:00:01.0: BAR 2: assigned [io 0xd000-0xd0ff]
[ 0.333726] pci 0000:00:01.0: BAR 2: set to [io 0xd000-0xd0ff] (PCI address [0xd000-0xd0ff])
[ 0.333871] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.333968] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
[ 0.334079] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.334178] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.334323] pci 0000:02:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.334465] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.334554] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
[ 0.334644] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.334742] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.334895] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.334984] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
[ 0.335101] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.335192] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.335336] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.335424] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff]
[ 0.335521] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.335618] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.335773] pci 0000:00:04.0: setting latency timer to 64
[ 0.335777] pci 0000:00:09.0: setting latency timer to 64
[ 0.335781] pci 0000:00:0b.0: setting latency timer to 64
[ 0.335785] pci 0000:00:0c.0: setting latency timer to 64
[ 0.335788] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.335790] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.335792] pci_bus 0000:00: resource 6 [io 0x9000-0xffff]
[ 0.335794] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
[ 0.335797] pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80]
[ 0.335799] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff]
[ 0.335801] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.335804] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xefffffff]
[ 0.335806] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff]
[ 0.335811] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.335813] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.335815] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 0.335818] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[ 0.335820] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[ 0.335822] pci_bus 0000:01: resource 6 [io 0x9000-0xffff]
[ 0.335824] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df]
[ 0.335826] pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80]
[ 0.335829] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff]
[ 0.335831] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.335833] pci_bus 0000:01: resource 11 [mem 0xc0000000-0xefffffff]
[ 0.335836] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff]
[ 0.335838] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.335840] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.335843] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.335845] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.335847] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.335850] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.335852] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
[ 0.335855] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.335857] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.335893] NET: Registered protocol family 2
[ 0.336193] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.337868] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.341061] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.341532] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.341624] TCP reno registered
[ 0.341722] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.341851] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.342071] NET: Registered protocol family 1
[ 0.342259] RPC: Registered named UNIX socket transport module.
[ 0.342352] RPC: Registered udp transport module.
[ 0.342439] RPC: Registered tcp transport module.
[ 0.342533] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.405126] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.405281] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.405425] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.405573] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.405725] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.405880] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.405999] pci 0000:02:00.0: Boot video device
[ 0.406010] PCI: CLS 64 bytes, default 64
[ 0.407099] PCI-DMA: Disabling AGP.
[ 0.410412] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.410508] PCI-DMA: using GART IOMMU.
[ 0.410605] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.415425] IBS: LVT offset 1 assigned
[ 0.415538] perf: AMD IBS detected (0x00000007)
[ 0.416224] microcode: CPU0: patch_level=0x01000095
[ 0.416317] microcode: CPU1: patch_level=0x01000095
[ 0.416419] microcode: CPU2: patch_level=0x01000095
[ 0.416522] microcode: CPU3: patch_level=0x01000095
[ 0.416670] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.417137] audit: initializing netlink socket (disabled)
[ 0.417251] type=2000 audit(1328288209.416:1): initialized
[ 0.442876] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.447504] VFS: Disk quotas dquot_6.5.2
[ 0.447694] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.448774] NTFS driver 2.1.30 [Flags: R/W DEBUG].
[ 0.450051] msgmni has been set to 7907
[ 0.450260] SELinux: Registering netfilter hooks
[ 0.450599] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.450748] io scheduler noop registered
[ 0.450842] io scheduler deadline registered
[ 0.451026] io scheduler cfq registered (default)
[ 0.451255] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.451281] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.451401] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.451420] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.451518] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.451535] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.451739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.451919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.474531] Non-volatile memory driver v1.3
[ 0.474625] Linux agpgart interface v0.103
[ 0.475014] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.475160] ACPI: Power Button [PWRB]
[ 0.475341] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.475483] ACPI: Power Button [PWRF]
[ 0.475703] ACPI: Fan [FAN] (on)
[ 0.478018] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 0.478249] ACPI: [Package] has zero elements (ffff88013ab06bc0)
[ 0.478345] ACPI: Invalid passive threshold
[ 0.478667] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.478756] ACPI: Thermal Zone [THRM] (40 C)
[ 0.479030] [drm] Initialized drm 1.1.0 20060810
[ 0.479182] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 0.479540] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 0.479655] nouveau 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 0.479801] nouveau 0000:02:00.0: setting latency timer to 64
[ 0.480928] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x092a80a2)
[ 0.483992] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 0.562376] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 0.562474] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 0.562570] [drm] nouveau 0000:02:00.0: Bios version 62.92.7d.00
[ 0.562668] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[ 0.562764] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[ 0.562905] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 0200

EDIT: Here's something that doesn make sense. I go in alsamixer, press F5, mute my s/pdif, put the master and mic volume to max and i can hear from my microphone
_________________
I'm a noob, be gentle with me. TEACH ME
Back to top
View user's profile Send private message
bigbangnet
Apprentice
Apprentice


Joined: 11 Jun 2007
Posts: 174

PostPosted: Mon Feb 06, 2012 3:55 pm    Post subject: Reply with quote

Bump

Still got the problem and still need help
_________________
I'm a noob, be gentle with me. TEACH ME
Back to top
View user's profile Send private message
Alakhai
Apprentice
Apprentice


Joined: 16 Oct 2003
Posts: 151

PostPosted: Thu Sep 06, 2012 1:20 am    Post subject: Reply with quote

Hi man did you fix?

I fixed after months in this way:

first of all you have to identify your card mode, to do it you have to
Code:
lspci -v | grep Creative

this is my output
Code:
04:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
   Subsystem: Creative Labs SB0570 [SB Audigy SE]


so my model is SB0570

Now, in my case i have module instead of compiled in kernel drivers so i can pass parameters easly, otherwhise you have to do via grub in another way.

To check what parameter we have to use print
Code:
modinfo snd-ca0106


that answer something like
Code:
filename:       /lib/modules/3.4.4-gentoo/kernel/sound/pci/ca0106/snd-ca0106.ko
license:        GPL
description:    CA0106
author:         James Courtier-Dutton <James@superbug.demon.co.uk>
srcversion:     3EA3FC37D933D5583A72A5A
alias:          pci:v00001102d00000007sv*sd*bc*sc*i*
depends:        snd,snd-pcm,snd-page-alloc,snd-rawmidi,snd-ac97-codec
intree:         Y
vermagic:       3.4.4-gentoo SMP preempt mod_unload modversions
parm:           index:Index value for the CA0106 soundcard. (array of int)
parm:           id:ID string for the CA0106 soundcard. (array of charp)
parm:           enable:Enable the CA0106 soundcard. (array of bool)
parm:           subsystem:Force card subsystem model. (array of uint)


now we identified that we can pass the string of model of our card via parameter: subsystem

Code:
cat /usr/src/linux/sound/pci/ca0106/ca0106_main.c | egrep "\.serial|\.name"
and search for your model your equivalent subsystem, the one above; copy it.

now you have to tell system to force load this so type:

Code:
 nano /etc/modprobe.d/snd-ca0106.conf

inside past:
Code:
options snd-ca0106 enable=1  subsystem=[the one you found before without brackets]


reboot and it should work!


I hope that someone will find it usefull
_________________
Gentoo Linux 64Bit User
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum