| View previous topic :: View next topic |
| Author |
Message |
EugeneTheJeep
Tux's lil' helper
Joined: 17 May 2017
Posts: 101
|
 Posted: Sun May 21, 2017 9:32 pm Post subject: no ebuilds to satisfy ">=sys-apps/dbus-1.9.8[systemd |
 |
|
I'm installing GNOME 3.14 using GNOME/GNOME Without systemd guide and ran into this issue:
After installing layman I ran
| Code: |
layman --sync-all
layman -a dantrell-gnome
layman -a dantrell-gnome-3-14
emaint sync -a
eselect profile set "dantrell-gnome:default/amd64/3.14/extended"
emerge --deep --with-bdeps=y --changed-use --update --ask --verbose @world
rc-update add dbus default
rc-update add consolekit default
rc
emerge --ask --verbose --keep-going gnome-base/gnome
|
I got:
| Code: | All ebuilds that could satisfy ">=sys-apps/dbus-1.9.8[systemd]" have been masked.
One of the following masked packages is required to complete your request:
- sys-apps/dbus-1.10.16-r1::gentoo (masked by: ~amd64 keyword) |
to /etc/portage/package.accept_keywords, I added:
| Code: | | =sys-apps/dbus-1.10.16-r1 ~amd64 |
again ran:
| Code: | | emerge --ask --verbose --keep-going gnome-base/gnome |
then I got:
| Code: | | emerge: there are no ebuilds to satisfy ">=sys-apps/dbus-1.9.8[systemd] |
Before I installed layman my profile was:
| Code: | | default/linux/amd64/13/0/desktop/gnome |
At this point I'm not sure why it's looking for a systemd ebuild. Any guidance is greatly appreciated; you'll have to let me know what further information to provide so I can resolve this issue. Thank You |
|
| Back to top |
|
 |
EugeneTheJeep
Tux's lil' helper
Joined: 17 May 2017
Posts: 101
|
| Posted: Sun May 21, 2017 10:51 pm Post subject: |
|
|
This was the output of emerge --deep --with-bdeps=y --changed-use --update --ask --verbose @world :
| Code: | #
These are the packages that would be merged, in order:
Calculating dependencies
* IMPORTANT: 11 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
. ......... ..... done!
[ebuild UD ] dev-libs/gobject-introspection-common-1.42.0::dantrell-gnome-3-14 [1.50.0::gentoo] 1,278 KiB
[ebuild U ] dev-libs/vala-common-0.36.3::dantrell-gnome [0.34.8::gentoo] 2,774 KiB
[ebuild N ] dev-libs/libunistring-0.9.7:0/2::dantrell-gnome USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 3,506 KiB
[ebuild R ] dev-libs/npth-1.3::dantrell-gnome [1.3::gentoo] USE="-static-libs" 0 KiB
[ebuild R ] dev-libs/openssl-1.0.2k::gentoo USE="asm sslv3 tls-heartbeat zlib -bindist* -gmp -kerberos -rfc3779 -sctp -sslv2 -static-libs {-test} -vanilla" ABI_X86="(64) -32 (-x32)" CPU_FLAGS_X86="(sse2)" 5,185 KiB
[ebuild U *] x11-base/xorg-drivers-9999::gentoo [1.18-r1::gentoo] INPUT_DEVICES="keyboard libinput mouse -acecad -aiptek -elographics -evdev -fpit -hyperpen -joystick -mutouch -penmount -synaptics -tslib -vmmouse -void -wacom" VIDEO_CARDS="amdgpu dummy fbdev intel nouveau radeon radeonsi vesa -ast -epson (-fglrx) (-freedreno) (-geode) -glint -i915% -i965% -mga -nv -nvidia (-omap) -qxl -r128 -siliconmotion -tdfx (-tegra) -via -virtualbox -vmware (-voodoo) (-apm%) (-chips%) (-cirrus%) (-i128%) (-i740%) (-mach64%) (-neomagic%) (-rendition%) (-s3%) (-s3virge%) (-savage%) (-sisusb%) (-sunbw2%) (-suncg14%) (-suncg3%) (-suncg6%) (-sunffb%) (-sunleo%) (-suntcx%) (-tga%) (-trident%) (-tseng%)" 0 KiB
[ebuild U ] app-admin/eselect-1.4.9::dantrell-gnome [1.4.8::gentoo] USE="-doc -emacs (-multischema) -vim-syntax" 173 KiB
[ebuild R ] app-eselect/eselect-pinentry-0.7::dantrell-gnome [0.7::gentoo] 0 KiB
[ebuild R ] dev-lang/python-3.4.5:3.4/3.4m::gentoo USE="gdbm ipv6 ncurses readline ssl (threads) xml -build -examples -hardened (-libressl) -sqlite* -tk -wininst" 0 KiB
[ebuild R ] dev-lang/python-2.7.12:2.7::gentoo USE="gdbm ipv6 ncurses readline ssl (threads) (wide-unicode) xml (-berkdb) -build -doc -examples -hardened (-libressl) -sqlite* -tk -wininst" 0 KiB
[ebuild R ] media-libs/freetype-2.8:2::gentoo USE="X adobe-cff bzip2 cleartype_hinting png -bindist* -debug -doc -fontforge -harfbuzz -infinality -static-libs -utils" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] x11-libs/libxkbcommon-0.6.0::gentoo USE="X -doc -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 595 KiB
[ebuild N ] x11-libs/libXinerama-1.1.3::gentoo USE="-static-libs" ABI_X86="(64) -32 (-x32)" 272 KiB
[ebuild R ] dev-util/gtk-doc-am-1.25-r1::dantrell-gnome [1.25-r1::gentoo] 658 KiB
[ebuild R ] dev-libs/boehm-gc-7.4.2::gentoo USE="cxx threads* -static-libs" 0 KiB
[ebuild N ] x11-libs/libXfont2-2.0.1::gentoo USE="bzip2 ipv6 truetype -doc -static-libs" 462 KiB
[ebuild R ] www-client/w3m-0.5.3-r9::gentoo USE="X gpm nls ssl unicode -fbcon -gtk* -imlib (-libressl) -lynxkeymap -nntp -xface" L10N="-ja" 0 KiB
[ebuild R ] sys-devel/gettext-0.19.8.1::dantrell-gnome [0.19.8.1::gentoo] USE="acl cxx ncurses nls openmp -cvs -doc -emacs -git -java -static-libs" ABI_X86="(64) -32 (-x32)" 19,243 KiB
[ebuild R ] dev-libs/libgpg-error-1.27-r1::dantrell-gnome [1.27-r1::gentoo] USE="nls -common-lisp -static-libs" ABI_X86="(64) -32 (-x32)" 795 KiB
[ebuild R ] dev-libs/libgcrypt-1.7.6:0/20::dantrell-gnome [1.7.6:0/20::gentoo] USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 2,830 KiB
[ebuild R ] dev-libs/libassuan-2.4.3-r1::dantrell-gnome [2.4.3-r1::gentoo] USE="-static-libs" 0 KiB
[ebuild N ] net-dns/libidn2-0.16-r1::gentoo USE="-static-libs" ABI_X86="(64) -32 (-x32)" 1,460 KiB
[ebuild U ] net-libs/gnutls-3.5.12:0/30::gentoo [3.3.26:0/0::gentoo] USE="cxx idn%* nls openssl seccomp%* sslv3%* tls-heartbeat%* zlib -dane -doc -examples -guile -openpgp% -pkcs11 -sslv2% -static-libs {-test} (-test-full) -tools% -valgrind% (-crywrap%*)" ABI_X86="(64) -32 (-x32)" LINGUAS="-cs -de -en -fi -fr -it -ms -nl -pl -sv -uk -vi -zh_CN" 7,044 KiB
[ebuild N ] sys-libs/libomp-3.9.1:0/3.9::gentoo USE="-hwloc -ompt" ABI_X86="(64) -32 (-x32)" 1,984 KiB
[ebuild N ] sys-devel/clang-runtime-3.9.1::gentoo USE="openmp -libcxx" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] sys-devel/llvm-3.9.1-r1:0/3.9.1::gentoo USE="clang* libffi ncurses sanitize static-analyzer xml -debug -default-compiler-rt -default-libcxx -doc -gold -libedit (-lldb) -multitarget -ocaml -python {-test}" ABI_X86="(64) -32 (-x32)" LLVM_TARGETS="AMDGPU BPF NVPTX (X86) -AArch64 -ARM -Hexagon -MSP430 -Mips -PowerPC -Sparc -SystemZ -XCore" PYTHON_TARGETS="python2_7" 11,911 KiB
[ebuild N ] sys-devel/clang-3.9.1-r100:0/3.9.1::gentoo USE="static-analyzer -debug -multitarget -python" ABI_X86="(64) -32 (-x32)" LLVM_TARGETS="AMDGPU BPF NVPTX (X86) -AArch64 -ARM -Hexagon -MSP430 -Mips -PowerPC -Sparc -SystemZ -XCore" 0 KiB
[ebuild R ] media-libs/mesa-13.0.5::gentoo USE="classic dri3 egl gallium gbm gles2 llvm nettle nptl -bindist* -d3d9 -debug -gcrypt -gles1 (-libressl) -opencl -openmax -openssl -osmesa -pax_kernel -pic (-selinux) -vaapi -valgrind -vdpau -vulkan -wayland -xa -xvmc" ABI_X86="(64) -32 (-x32)" VIDEO_CARDS="intel nouveau radeon radeonsi (-freedreno) -i915 -i965 -r100 -r200 -r300 -r600 (-vc4) -vmware" 0 KiB
[ebuild N ] virtual/opengl-7.0-r1::gentoo ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild UD ] dev-util/gdbus-codegen-2.42.2::dantrell-gnome [2.50.3::gentoo] PYTHON_TARGETS="python2_7 python3_4 (-python3_5) (-python3_6)" 6,839 KiB
[ebuild N ] kde-frameworks/extra-cmake-modules-5.29.0:5/5.29::gentoo USE="-doc {-test}" 296 KiB
[ebuild N ] media-libs/glfw-3.2.1::gentoo USE="-examples -wayland" 640 KiB
[ebuild U ] x11-base/xorg-server-1.19.2:0/1.19.2::gentoo [1.18.4:0/1.18.4::gentoo] USE="glamor ipv6 suid udev xorg -debug% -dmx -doc -kdrive* (-libressl) -minimal (-selinux) -static-libs (-systemd) -tslib -unwind -wayland -xephyr -xnest -xvfb" 5,830 KiB
[ebuild rR ] x11-drivers/xf86-input-mouse-1.9.2::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-video-intel-2.99.917_p20170216::gentoo USE="dri sna udev -debug -dri3 -tools -uxa -xvmc" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-fbdev-0.4.4::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-input-keyboard-1.9.0::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-video-amdgpu-1.2.0::gentoo USE="glamor" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-ati-7.8.0::gentoo USE="glamor udev" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-nouveau-1.0.13::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-video-dummy-0.3.8::gentoo USE="-dga" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-vesa-2.3.4::gentoo 0 KiB
[ebuild r UD ] dev-libs/glib-2.42.2-r1:2/42::dantrell-gnome [2.50.3-r1:2/2::gentoo] USE="dbus (mime) xattr -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7" 0 KiB
[blocks b ] <dev-util/gdbus-codegen-2.50.3 ("<dev-util/gdbus-codegen-2.50.3" is blocking dev-libs/glib-2.50.3-r1)
[ebuild N ] gnome-base/dconf-0.22.0::dantrell-gnome USE="X {-test}" 385 KiB
[ebuild UD ] dev-libs/gobject-introspection-1.42.0-r1::dantrell-gnome-3-14 [1.50.0::gentoo] USE="cairo -doctool {-test}" PYTHON_SINGLE_TARGET="(-python2_7%) (-python3_4%*) (-python3_5%)" PYTHON_TARGETS="python2_7 (-python3_4%*) (-python3_5%)" 0 KiB
[ebuild R ] dev-libs/libcroco-0.6.12-r1:0.6::dantrell-gnome [0.6.12-r1:0.6::gentoo] USE="{-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] dev-libs/dbus-glib-0.102::gentoo USE="-debug -doc -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 766 KiB
[ebuild UD ] x11-libs/gdk-pixbuf-2.36.4:2::dantrell-gnome [2.36.6:2::gentoo] USE="X introspection jpeg tiff -debug -jpeg2k {-test}" ABI_X86="(64) -32 (-x32)" 5,038 KiB
[ebuild UD ] dev-libs/atk-2.14.0::dantrell-gnome-3-14 [2.22.0::gentoo] USE="introspection nls {-test}" ABI_X86="(64) -32 (-x32)" 680 KiB
[ebuild R ] sys-fs/eudev-3.1.5::gentoo USE="hwdb introspection* kmod -rule-generator (-selinux) -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild U ] app-text/poppler-0.54.0:0/67::dantrell-gnome [0.45.0:0/62::gentoo] USE="cairo cxx introspection jpeg jpeg2k lcms png tiff utils -cjk -curl -debug -doc -nss -qt4* -qt5 (-cairo-qt%)" 1,659 KiB
[ebuild UD ] app-accessibility/at-spi2-core-2.14.1:2::dantrell-gnome-3-14 [2.22.1:2::gentoo] USE="X introspection" ABI_X86="(64) -32 (-x32)" 446 KiB
[ebuild UD ] x11-libs/pango-1.36.8-r1::dantrell-gnome [1.40.5::gentoo] USE="X introspection {-test}" ABI_X86="(64) -32 (-x32)" 1,010 KiB
[ebuild UD ] app-accessibility/at-spi2-atk-2.14.1:2::dantrell-gnome-3-14 [2.22.0:2::gentoo] USE="{-test}" ABI_X86="(64) -32 (-x32)" 275 KiB
[ebuild UD ] dev-util/gtk-update-icon-cache-3.14.15::dantrell-gnome-3-14 [3.22.2::gentoo] 304 KiB
[ebuild N ] app-text/mupdf-1.11-r1:0/1.11::gentoo USE="X curl opengl openssl -javascript (-libressl) -static -static-libs -vanilla" 39,215 KiB
[ebuild R ] gnome-base/librsvg-2.40.17:2::dantrell-gnome [2.40.17:2::gentoo] USE="introspection -tools -vala" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild rR ] dev-libs/libgudev-230-r1::gentoo USE="introspection -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild UD ] x11-themes/adwaita-icon-theme-3.14.1-r2::dantrell-gnome-3-14 [3.22.0-r1::gentoo] USE="branding" 17,170 KiB
[ebuild rR ] x11-drivers/xf86-input-libinput-0.24.0::gentoo 0 KiB
[ebuild UD ] dev-libs/libgusb-0.2.7::dantrell-gnome [0.2.9::gentoo] USE="introspection -static-libs -vala" ABI_X86="(64) -32 (-x32)" 270 KiB
[ebuild R ] app-text/ghostscript-gpl-9.20-r1::gentoo USE="X cups dbus tiff -gtk* -idn -static-libs" L10N="-de -ja -ko -zh-CN -zh-TW" 0 KiB
[ebuild U ] net-print/cups-filters-1.12.0::dantrell-gnome [1.5.0::gentoo] USE="dbus foomatic jpeg ldap pdf%* png postscript%* tiff -perl -static-libs -zeroconf" 1,385 KiB
[ebuild R ] app-crypt/libsecret-0.18.5::dantrell-gnome [0.18.5::gentoo] USE="crypt introspection -debug {-test} -vala" 0 KiB
[ebuild U ] sys-auth/pambase-20150213-r1::dantrell-gnome [20150213::gentoo] USE="consolekit* cracklib gnome-keyring* nullok sha512 -debug -elogind% -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) (-systemd)" 0 KiB
[ebuild R ] net-misc/openssh-7.3_p1-r7::gentoo USE="X* hpn ldap* pam pie ssl -X509 -bindist* -debug -kerberos -ldns -libedit (-libressl) -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[ebuild R ] sys-auth/polkit-0.113::gentoo USE="introspection nls pam -examples -gtk* -jit -kde (-selinux) (-systemd) {-test}" 0 KiB
[ebuild UD ] sys-auth/consolekit-0.4.6::dantrell-gnome [1.1.0-r1::gentoo] USE="acl pam policykit -debug -doc (-selinux) -systemd-units% {-test} (-cgroups%) (-pm-utils%)" 370 KiB
[ebuild UD ] x11-misc/colord-1.2.12:0/2::dantrell-gnome [1.3.4:0/2::gentoo] USE="gusb introspection policykit udev -argyllcms -examples -extra-print-profiles -scanner (-systemd) -vala" ABI_X86="(64) -32 (-x32)" 1,187 KiB
[ebuild UD ] x11-libs/gtk+-3.14.15:3/14::dantrell-gnome-3-14 [3.22.15:3/3::gentoo] USE="X colord cups introspection (-aqua) -broadway -cloudprint -examples {-test} -vim-syntax -wayland -xinerama" ABI_X86="(64) -32 (-x32)" 15,524 KiB
[ebuild UD ] app-crypt/gcr-3.14.0:0/1::dantrell-gnome-3-14 [3.20.0:0/1::gentoo] USE="gtk introspection -debug {-test} -vala*" 1,310 KiB
[ebuild R ] app-crypt/pinentry-0.9.7-r1::dantrell-gnome [0.9.7-r1::gentoo] USE="gnome-keyring ncurses -caps -emacs -gtk* -qt4* -qt5 -static" 0 KiB
[ebuild U ] app-crypt/gnupg-2.1.21::dantrell-gnome [2.1.20-r1::gentoo] USE="bzip2 gnutls ldap nls readline smartcard usb -doc (-selinux) -tofu -tools -wks-server" 6,322 KiB
[ebuild UD ] gnome-base/gnome-keyring-3.14.0::dantrell-gnome-3-14 [3.20.0::gentoo] USE="caps filecaps pam ssh-agent (-selinux) {-test}" 1,145 KiB
[ebuild R ] gnome-base/libgnome-keyring-3.12.0::dantrell-gnome [3.12.0::gentoo] USE="introspection -debug {-test} -vala" 0 KiB
[ebuild U ] sys-apps/openrc-0.26.2::gentoo [0.24.2::gentoo] USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[blocks B ] <x11-drivers/xf86-video-virtualbox-5.1.14 ("<x11-drivers/xf86-video-virtualbox-5.1.14" is blocking x11-base/xorg-drivers-9999)
Total: 76 packages (10 upgrades, 17 downgrades, 14 new, 35 reinstalls), Size of downloads: 168,218 KiB
Conflict: 2 blocks (1 unsatisfied)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
x11-base/xorg-server:0
(x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(x11-base/xorg-server-1.18.4:0/1.18.4::gentoo, installed) pulled in by
<x11-base/xorg-server-1.19:0/1.18.4=[-minimal] required by (x11-drivers/xf86-video-virtualbox-5.0.32:0/0::gentoo, installed)
^ ^^^^^^^^^^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously. You may want to try a larger value of
the --backtrack option, such as --backtrack=30, in order to see if
that will solve this conflict automatically.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(x11-drivers/xf86-video-virtualbox-5.0.32:0/0::gentoo, installed) pulled in by
~x11-drivers/xf86-video-virtualbox-5.0.32 required by (app-emulation/virtualbox-guest-additions-5.0.32:0/0::gentoo, installed)
(x11-base/xorg-drivers-9999:0/0::gentoo, ebuild scheduled for merge) pulled in by
>=x11-base/xorg-drivers-1.19 required by (x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge)
>=x11-base/xorg-drivers-1.18 required by (x11-base/xorg-server-1.18.4:0/1.18.4::gentoo, installed)
For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packages
The following packages are causing rebuilds:
(dev-libs/glib-2.42.2-r1:2/42::dantrell-gnome, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libgudev-230-r1:0/0::gentoo, ebuild scheduled for merge)
(x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge) causes rebuilds for:
(x11-drivers/xf86-video-ati-7.8.0:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-nouveau-1.0.13:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-intel-2.99.917_p20170216:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-input-keyboard-1.9.0:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-vesa-2.3.4:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-fbdev-0.4.4:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-input-libinput-0.24.0:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-dummy-0.3.8:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-input-mouse-1.9.2:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-amdgpu-1.2.0:0/0::gentoo, ebuild scheduled for merge)
|
|
|
| Back to top |
|
|
ct85711
Veteran
Joined: 27 Sep 2005
Posts: 1791
|
| Posted: Mon May 22, 2017 12:57 am Post subject: |
|
|
First off, using -9999 packages are NOT recommended to use ever, unless you have a specific need for it (and you end up being that you pick up the pieces), as those packages are development packages, so can change quite frequently to where we will be unable to assist you.
| Code: | | [blocks B ] <x11-drivers/xf86-video-virtualbox-5.1.14 ("<x11-drivers/xf86-video-virtualbox-5.1.14" is blocking x11-base/xorg-drivers-9999) |
This is saying you need newer version than xf86-video-virtualbox-5.1.14... |
|
| Back to top |
|
|
Hu
Moderator
Joined: 06 Mar 2007
Posts: 21605
|
| Posted: Mon May 22, 2017 1:01 am Post subject: |
|
|
| The output does not say you need a systemd ebuild. It says you need a dbus with systemd enabled. Your use case probably should not need that, so there is something for us to solve. What package needs dbus with USE=systemd? |
|
| Back to top |
|
|
ct85711
Veteran
Joined: 27 Sep 2005
Posts: 1791
|
| Posted: Mon May 22, 2017 1:04 am Post subject: |
|
|
| As far as sys-apps/dbus goes, 1.10.18 is already marked stable for most arches; so you don't need keyword anything for this package. So what would be better is find out what is preventing portage from using the newer version of dbus... (note, you can always do emerge -1pv dbus and look at the messages and resolve the issue). |
|
| Back to top |
|
|
EugeneTheJeep
Tux's lil' helper
Joined: 17 May 2017
Posts: 101
|
| Posted: Mon May 22, 2017 1:31 am Post subject: |
|
|
Here is some more info that could be important:
This is a Virtualboxbox guest OS
I installed app-emulation/virtualbox-guest-additions 5.0.32 to get X11 working
The guest addtion package installed x11-base/xorg-drivers-1.18-r1
@ct85711
I removed the entry from package.accept_keywords and uninstalled dbus
| Code: | emerge -1pv sys-apps/dbus
These are the packages that would be merged, in order:
Calculating dependencies ... done!
[ebuild N ] sys-apps/dbus-1.10.18::gentoo USE="X -debug -doc -elogind (-selinux) -static-libs (-systemd) {-test} -user-session" ABI_X86="(64) -32 (-x32)" 0 KiB
Total: 1 package (1 new), Size of downloads: 0 KiB
* IMPORTANT: 11 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items. |
@Hu
I don't see any package in that output with that USE flag. What is the invocation so I can get you that information? |
|
| Back to top |
|
|
dantrell
l33t
Joined: 01 Jun 2007
Posts: 915
Location: Earth
|
| Posted: Mon May 22, 2017 11:06 am Post subject: Re: no ebuilds to satisfy ">=sys-apps/dbus-1.9.8[sys |
|
|
| EugeneTheJeep wrote: | | I'm installing GNOME 3.14 using GNOME/GNOME Without systemd guide [...] |
For the record, the support thread for GNOME Without Systemd is here.
Please post there in the future (or at the very least in Unsupported Software if you think you might derail the thread).
| EugeneTheJeep wrote: | | Code: | All ebuilds that could satisfy ">=sys-apps/dbus-1.9.8[systemd]" have been masked.
One of the following masked packages is required to complete your request:
- sys-apps/dbus-1.10.16-r1::gentoo (masked by: ~amd64 keyword) |
|
Are you skipping steps? Per the documentation, after selecting your profile you must run and complete:
| Code: | | emerge --ask --update --deep --changed-use --with-bdeps=y @world |
before you even proceed with:
| Code: | | emerge --ask --keep-going gnome |
Please share the full emerge output starting from the emerge command (with and without the --tree option) that produced the dbus issue after you update @world (while fixing unrelated blockers).
Now, I will point out that:
1. The project overlays mask the systemd USE flag.
2. sys-apps/dbus-1.10.18 was stabilized for amd64 on 2017-05-03.
3. If you are running an OpenRC system nothing should be requiring systemd because a quick grep of portage shows that the only the following packages want dbus[systemd]:
| Code: | sys-apps/systemd/systemd-226-r2.ebuild:PDEPEND=">=sys-apps/dbus-1.6.8-r1:0[systemd]
sys-apps/systemd/systemd-231.ebuild:PDEPEND=">=sys-apps/dbus-1.8.8:0[systemd]
sys-apps/systemd/systemd-232.ebuild:PDEPEND=">=sys-apps/dbus-1.8.8:0[systemd]
sys-apps/systemd/systemd-233-r1.ebuild:PDEPEND=">=sys-apps/dbus-1.9.8[systemd]
sys-apps/systemd/systemd-9999.ebuild:PDEPEND=">=sys-apps/dbus-1.9.8[systemd] |
This indicates that provided you are synced up, the problem is either in your world file or in /etc/portage/* (which will override the bundled profiles).
If you download a recent stage3 tarball and do nothing but activate the project overlays, select a profile and run:
| Code: | | emerge --pretend --update --deep --changed-use --with-bdeps=y gnome |
you will get clean emerge output. The key to resolving this is figuring out where you diverged from the defaults.
_________________
Dantrell B. |
|
| Back to top |
|
|
EugeneTheJeep
Tux's lil' helper
Joined: 17 May 2017
Posts: 101
|
| Posted: Mon May 22, 2017 12:33 pm Post subject: |
|
|
@dantrell
Thanks for the reply. I was aware of the stickied support thread, and you were correct to surmise that I didn't want to derail it. (After perusing it I decided I didn't want to crap it up with newb questions, as it seemed like mostly advanced user and developer-level content). Maybe a mod can move this thread to unsupported software? Otherwise I can re-create there with an updated title, as the problem does indeed lie with a failed
| Code: | | emerge --ask --update --deep --changed-use --with-bdeps=y @world |
The output is available on the second post of this thread or reposted here:
| Code: |
These are the packages that would be merged, in order:
Calculating dependencies
* IMPORTANT: 11 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
. ......... ..... done!
[ebuild UD ] dev-libs/gobject-introspection-common-1.42.0::dantrell-gnome-3-14 [1.50.0::gentoo] 1,278 KiB
[ebuild U ] dev-libs/vala-common-0.36.3::dantrell-gnome [0.34.8::gentoo] 2,774 KiB
[ebuild N ] dev-libs/libunistring-0.9.7:0/2::dantrell-gnome USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 3,506 KiB
[ebuild R ] dev-libs/npth-1.3::dantrell-gnome [1.3::gentoo] USE="-static-libs" 0 KiB
[ebuild R ] dev-libs/openssl-1.0.2k::gentoo USE="asm sslv3 tls-heartbeat zlib -bindist* -gmp -kerberos -rfc3779 -sctp -sslv2 -static-libs {-test} -vanilla" ABI_X86="(64) -32 (-x32)" CPU_FLAGS_X86="(sse2)" 5,185 KiB
[ebuild U *] x11-base/xorg-drivers-9999::gentoo [1.18-r1::gentoo] INPUT_DEVICES="keyboard libinput mouse -acecad -aiptek -elographics -evdev -fpit -hyperpen -joystick -mutouch -penmount -synaptics -tslib -vmmouse -void -wacom" VIDEO_CARDS="amdgpu dummy fbdev intel nouveau radeon radeonsi vesa -ast -epson (-fglrx) (-freedreno) (-geode) -glint -i915% -i965% -mga -nv -nvidia (-omap) -qxl -r128 -siliconmotion -tdfx (-tegra) -via -virtualbox -vmware (-voodoo) (-apm%) (-chips%) (-cirrus%) (-i128%) (-i740%) (-mach64%) (-neomagic%) (-rendition%) (-s3%) (-s3virge%) (-savage%) (-sisusb%) (-sunbw2%) (-suncg14%) (-suncg3%) (-suncg6%) (-sunffb%) (-sunleo%) (-suntcx%) (-tga%) (-trident%) (-tseng%)" 0 KiB
[ebuild U ] app-admin/eselect-1.4.9::dantrell-gnome [1.4.8::gentoo] USE="-doc -emacs (-multischema) -vim-syntax" 173 KiB
[ebuild R ] app-eselect/eselect-pinentry-0.7::dantrell-gnome [0.7::gentoo] 0 KiB
[ebuild R ] dev-lang/python-3.4.5:3.4/3.4m::gentoo USE="gdbm ipv6 ncurses readline ssl (threads) xml -build -examples -hardened (-libressl) -sqlite* -tk -wininst" 0 KiB
[ebuild R ] dev-lang/python-2.7.12:2.7::gentoo USE="gdbm ipv6 ncurses readline ssl (threads) (wide-unicode) xml (-berkdb) -build -doc -examples -hardened (-libressl) -sqlite* -tk -wininst" 0 KiB
[ebuild R ] media-libs/freetype-2.8:2::gentoo USE="X adobe-cff bzip2 cleartype_hinting png -bindist* -debug -doc -fontforge -harfbuzz -infinality -static-libs -utils" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] x11-libs/libxkbcommon-0.6.0::gentoo USE="X -doc -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 595 KiB
[ebuild N ] x11-libs/libXinerama-1.1.3::gentoo USE="-static-libs" ABI_X86="(64) -32 (-x32)" 272 KiB
[ebuild R ] dev-util/gtk-doc-am-1.25-r1::dantrell-gnome [1.25-r1::gentoo] 658 KiB
[ebuild R ] dev-libs/boehm-gc-7.4.2::gentoo USE="cxx threads* -static-libs" 0 KiB
[ebuild N ] x11-libs/libXfont2-2.0.1::gentoo USE="bzip2 ipv6 truetype -doc -static-libs" 462 KiB
[ebuild R ] www-client/w3m-0.5.3-r9::gentoo USE="X gpm nls ssl unicode -fbcon -gtk* -imlib (-libressl) -lynxkeymap -nntp -xface" L10N="-ja" 0 KiB
[ebuild R ] sys-devel/gettext-0.19.8.1::dantrell-gnome [0.19.8.1::gentoo] USE="acl cxx ncurses nls openmp -cvs -doc -emacs -git -java -static-libs" ABI_X86="(64) -32 (-x32)" 19,243 KiB
[ebuild R ] dev-libs/libgpg-error-1.27-r1::dantrell-gnome [1.27-r1::gentoo] USE="nls -common-lisp -static-libs" ABI_X86="(64) -32 (-x32)" 795 KiB
[ebuild R ] dev-libs/libgcrypt-1.7.6:0/20::dantrell-gnome [1.7.6:0/20::gentoo] USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 2,830 KiB
[ebuild R ] dev-libs/libassuan-2.4.3-r1::dantrell-gnome [2.4.3-r1::gentoo] USE="-static-libs" 0 KiB
[ebuild N ] net-dns/libidn2-0.16-r1::gentoo USE="-static-libs" ABI_X86="(64) -32 (-x32)" 1,460 KiB
[ebuild U ] net-libs/gnutls-3.5.12:0/30::gentoo [3.3.26:0/0::gentoo] USE="cxx idn%* nls openssl seccomp%* sslv3%* tls-heartbeat%* zlib -dane -doc -examples -guile -openpgp% -pkcs11 -sslv2% -static-libs {-test} (-test-full) -tools% -valgrind% (-crywrap%*)" ABI_X86="(64) -32 (-x32)" LINGUAS="-cs -de -en -fi -fr -it -ms -nl -pl -sv -uk -vi -zh_CN" 7,044 KiB
[ebuild N ] sys-libs/libomp-3.9.1:0/3.9::gentoo USE="-hwloc -ompt" ABI_X86="(64) -32 (-x32)" 1,984 KiB
[ebuild N ] sys-devel/clang-runtime-3.9.1::gentoo USE="openmp -libcxx" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] sys-devel/llvm-3.9.1-r1:0/3.9.1::gentoo USE="clang* libffi ncurses sanitize static-analyzer xml -debug -default-compiler-rt -default-libcxx -doc -gold -libedit (-lldb) -multitarget -ocaml -python {-test}" ABI_X86="(64) -32 (-x32)" LLVM_TARGETS="AMDGPU BPF NVPTX (X86) -AArch64 -ARM -Hexagon -MSP430 -Mips -PowerPC -Sparc -SystemZ -XCore" PYTHON_TARGETS="python2_7" 11,911 KiB
[ebuild N ] sys-devel/clang-3.9.1-r100:0/3.9.1::gentoo USE="static-analyzer -debug -multitarget -python" ABI_X86="(64) -32 (-x32)" LLVM_TARGETS="AMDGPU BPF NVPTX (X86) -AArch64 -ARM -Hexagon -MSP430 -Mips -PowerPC -Sparc -SystemZ -XCore" 0 KiB
[ebuild R ] media-libs/mesa-13.0.5::gentoo USE="classic dri3 egl gallium gbm gles2 llvm nettle nptl -bindist* -d3d9 -debug -gcrypt -gles1 (-libressl) -opencl -openmax -openssl -osmesa -pax_kernel -pic (-selinux) -vaapi -valgrind -vdpau -vulkan -wayland -xa -xvmc" ABI_X86="(64) -32 (-x32)" VIDEO_CARDS="intel nouveau radeon radeonsi (-freedreno) -i915 -i965 -r100 -r200 -r300 -r600 (-vc4) -vmware" 0 KiB
[ebuild N ] virtual/opengl-7.0-r1::gentoo ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild UD ] dev-util/gdbus-codegen-2.42.2::dantrell-gnome [2.50.3::gentoo] PYTHON_TARGETS="python2_7 python3_4 (-python3_5) (-python3_6)" 6,839 KiB
[ebuild N ] kde-frameworks/extra-cmake-modules-5.29.0:5/5.29::gentoo USE="-doc {-test}" 296 KiB
[ebuild N ] media-libs/glfw-3.2.1::gentoo USE="-examples -wayland" 640 KiB
[ebuild U ] x11-base/xorg-server-1.19.2:0/1.19.2::gentoo [1.18.4:0/1.18.4::gentoo] USE="glamor ipv6 suid udev xorg -debug% -dmx -doc -kdrive* (-libressl) -minimal (-selinux) -static-libs (-systemd) -tslib -unwind -wayland -xephyr -xnest -xvfb" 5,830 KiB
[ebuild rR ] x11-drivers/xf86-input-mouse-1.9.2::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-video-intel-2.99.917_p20170216::gentoo USE="dri sna udev -debug -dri3 -tools -uxa -xvmc" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-fbdev-0.4.4::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-input-keyboard-1.9.0::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-video-amdgpu-1.2.0::gentoo USE="glamor" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-ati-7.8.0::gentoo USE="glamor udev" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-nouveau-1.0.13::gentoo 0 KiB
[ebuild rR ] x11-drivers/xf86-video-dummy-0.3.8::gentoo USE="-dga" 0 KiB
[ebuild rR ] x11-drivers/xf86-video-vesa-2.3.4::gentoo 0 KiB
[ebuild r UD ] dev-libs/glib-2.42.2-r1:2/42::dantrell-gnome [2.50.3-r1:2/2::gentoo] USE="dbus (mime) xattr -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7" 0 KiB
[blocks b ] <dev-util/gdbus-codegen-2.50.3 ("<dev-util/gdbus-codegen-2.50.3" is blocking dev-libs/glib-2.50.3-r1)
[ebuild N ] gnome-base/dconf-0.22.0::dantrell-gnome USE="X {-test}" 385 KiB
[ebuild UD ] dev-libs/gobject-introspection-1.42.0-r1::dantrell-gnome-3-14 [1.50.0::gentoo] USE="cairo -doctool {-test}" PYTHON_SINGLE_TARGET="(-python2_7%) (-python3_4%*) (-python3_5%)" PYTHON_TARGETS="python2_7 (-python3_4%*) (-python3_5%)" 0 KiB
[ebuild R ] dev-libs/libcroco-0.6.12-r1:0.6::dantrell-gnome [0.6.12-r1:0.6::gentoo] USE="{-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] dev-libs/dbus-glib-0.102::gentoo USE="-debug -doc -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 766 KiB
[ebuild UD ] x11-libs/gdk-pixbuf-2.36.4:2::dantrell-gnome [2.36.6:2::gentoo] USE="X introspection jpeg tiff -debug -jpeg2k {-test}" ABI_X86="(64) -32 (-x32)" 5,038 KiB
[ebuild UD ] dev-libs/atk-2.14.0::dantrell-gnome-3-14 [2.22.0::gentoo] USE="introspection nls {-test}" ABI_X86="(64) -32 (-x32)" 680 KiB
[ebuild R ] sys-fs/eudev-3.1.5::gentoo USE="hwdb introspection* kmod -rule-generator (-selinux) -static-libs {-test}" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild U ] app-text/poppler-0.54.0:0/67::dantrell-gnome [0.45.0:0/62::gentoo] USE="cairo cxx introspection jpeg jpeg2k lcms png tiff utils -cjk -curl -debug -doc -nss -qt4* -qt5 (-cairo-qt%)" 1,659 KiB
[ebuild UD ] app-accessibility/at-spi2-core-2.14.1:2::dantrell-gnome-3-14 [2.22.1:2::gentoo] USE="X introspection" ABI_X86="(64) -32 (-x32)" 446 KiB
[ebuild UD ] x11-libs/pango-1.36.8-r1::dantrell-gnome [1.40.5::gentoo] USE="X introspection {-test}" ABI_X86="(64) -32 (-x32)" 1,010 KiB
[ebuild UD ] app-accessibility/at-spi2-atk-2.14.1:2::dantrell-gnome-3-14 [2.22.0:2::gentoo] USE="{-test}" ABI_X86="(64) -32 (-x32)" 275 KiB
[ebuild UD ] dev-util/gtk-update-icon-cache-3.14.15::dantrell-gnome-3-14 [3.22.2::gentoo] 304 KiB
[ebuild N ] app-text/mupdf-1.11-r1:0/1.11::gentoo USE="X curl opengl openssl -javascript (-libressl) -static -static-libs -vanilla" 39,215 KiB
[ebuild R ] gnome-base/librsvg-2.40.17:2::dantrell-gnome [2.40.17:2::gentoo] USE="introspection -tools -vala" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild rR ] dev-libs/libgudev-230-r1::gentoo USE="introspection -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild UD ] x11-themes/adwaita-icon-theme-3.14.1-r2::dantrell-gnome-3-14 [3.22.0-r1::gentoo] USE="branding" 17,170 KiB
[ebuild rR ] x11-drivers/xf86-input-libinput-0.24.0::gentoo 0 KiB
[ebuild UD ] dev-libs/libgusb-0.2.7::dantrell-gnome [0.2.9::gentoo] USE="introspection -static-libs -vala" ABI_X86="(64) -32 (-x32)" 270 KiB
[ebuild R ] app-text/ghostscript-gpl-9.20-r1::gentoo USE="X cups dbus tiff -gtk* -idn -static-libs" L10N="-de -ja -ko -zh-CN -zh-TW" 0 KiB
[ebuild U ] net-print/cups-filters-1.12.0::dantrell-gnome [1.5.0::gentoo] USE="dbus foomatic jpeg ldap pdf%* png postscript%* tiff -perl -static-libs -zeroconf" 1,385 KiB
[ebuild R ] app-crypt/libsecret-0.18.5::dantrell-gnome [0.18.5::gentoo] USE="crypt introspection -debug {-test} -vala" 0 KiB
[ebuild U ] sys-auth/pambase-20150213-r1::dantrell-gnome [20150213::gentoo] USE="consolekit* cracklib gnome-keyring* nullok sha512 -debug -elogind% -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) (-systemd)" 0 KiB
[ebuild R ] net-misc/openssh-7.3_p1-r7::gentoo USE="X* hpn ldap* pam pie ssl -X509 -bindist* -debug -kerberos -ldns -libedit (-libressl) -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[ebuild R ] sys-auth/polkit-0.113::gentoo USE="introspection nls pam -examples -gtk* -jit -kde (-selinux) (-systemd) {-test}" 0 KiB
[ebuild UD ] sys-auth/consolekit-0.4.6::dantrell-gnome [1.1.0-r1::gentoo] USE="acl pam policykit -debug -doc (-selinux) -systemd-units% {-test} (-cgroups%) (-pm-utils%)" 370 KiB
[ebuild UD ] x11-misc/colord-1.2.12:0/2::dantrell-gnome [1.3.4:0/2::gentoo] USE="gusb introspection policykit udev -argyllcms -examples -extra-print-profiles -scanner (-systemd) -vala" ABI_X86="(64) -32 (-x32)" 1,187 KiB
[ebuild UD ] x11-libs/gtk+-3.14.15:3/14::dantrell-gnome-3-14 [3.22.15:3/3::gentoo] USE="X colord cups introspection (-aqua) -broadway -cloudprint -examples {-test} -vim-syntax -wayland -xinerama" ABI_X86="(64) -32 (-x32)" 15,524 KiB
[ebuild UD ] app-crypt/gcr-3.14.0:0/1::dantrell-gnome-3-14 [3.20.0:0/1::gentoo] USE="gtk introspection -debug {-test} -vala*" 1,310 KiB
[ebuild R ] app-crypt/pinentry-0.9.7-r1::dantrell-gnome [0.9.7-r1::gentoo] USE="gnome-keyring ncurses -caps -emacs -gtk* -qt4* -qt5 -static" 0 KiB
[ebuild U ] app-crypt/gnupg-2.1.21::dantrell-gnome [2.1.20-r1::gentoo] USE="bzip2 gnutls ldap nls readline smartcard usb -doc (-selinux) -tofu -tools -wks-server" 6,322 KiB
[ebuild UD ] gnome-base/gnome-keyring-3.14.0::dantrell-gnome-3-14 [3.20.0::gentoo] USE="caps filecaps pam ssh-agent (-selinux) {-test}" 1,145 KiB
[ebuild R ] gnome-base/libgnome-keyring-3.12.0::dantrell-gnome [3.12.0::gentoo] USE="introspection -debug {-test} -vala" 0 KiB
[ebuild U ] sys-apps/openrc-0.26.2::gentoo [0.24.2::gentoo] USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[blocks B ] <x11-drivers/xf86-video-virtualbox-5.1.14 ("<x11-drivers/xf86-video-virtualbox-5.1.14" is blocking x11-base/xorg-drivers-9999)
Total: 76 packages (10 upgrades, 17 downgrades, 14 new, 35 reinstalls), Size of downloads: 168,218 KiB
Conflict: 2 blocks (1 unsatisfied)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
x11-base/xorg-server:0
(x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(x11-base/xorg-server-1.18.4:0/1.18.4::gentoo, installed) pulled in by
<x11-base/xorg-server-1.19:0/1.18.4=[-minimal] required by (x11-drivers/xf86-video-virtualbox-5.0.32:0/0::gentoo, installed)
^ ^^^^^^^^^^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously. You may want to try a larger value of
the --backtrack option, such as --backtrack=30, in order to see if
that will solve this conflict automatically.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(x11-drivers/xf86-video-virtualbox-5.0.32:0/0::gentoo, installed) pulled in by
~x11-drivers/xf86-video-virtualbox-5.0.32 required by (app-emulation/virtualbox-guest-additions-5.0.32:0/0::gentoo, installed)
(x11-base/xorg-drivers-9999:0/0::gentoo, ebuild scheduled for merge) pulled in by
>=x11-base/xorg-drivers-1.19 required by (x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge)
>=x11-base/xorg-drivers-1.18 required by (x11-base/xorg-server-1.18.4:0/1.18.4::gentoo, installed)
For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packages
The following packages are causing rebuilds:
(dev-libs/glib-2.42.2-r1:2/42::dantrell-gnome, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libgudev-230-r1:0/0::gentoo, ebuild scheduled for merge)
(x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge) causes rebuilds for:
(x11-drivers/xf86-video-ati-7.8.0:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-nouveau-1.0.13:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-intel-2.99.917_p20170216:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-input-keyboard-1.9.0:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-vesa-2.3.4:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-fbdev-0.4.4:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-input-libinput-0.24.0:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-dummy-0.3.8:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-input-mouse-1.9.2:0/0::gentoo, ebuild scheduled for merge)
(x11-drivers/xf86-video-amdgpu-1.2.0:0/0::gentoo, ebuild scheduled for merge) |
My Gentoo is a guest OS running on virtual box. I installed guest additions to get X.org up and running.
This is an outline of what I've done so far:
1. Prepped disk & set up file systems using MBR
2. downloaded & upacked stage3-amd64-20170504.tar.bz2
3. ran emerge-sync
4. selected profile default/linux/amd64/13.0/desktop/gnome
5. ran emerge --ask --update --deep --newuse @world (this took hours and ended up segfaulting on me. I didn't run it again because the handbook said it was optional for non-systemd profiles. This has also crashed my computer twice before on previous Gentoo build attempts [since deleted; this is a fresh build], yielding a Windows 10 BSOD CRITICAL STRUCTURE CORRUPTION win32kfull.sys, which I believe is due to an illegal memory access) The previous attempts I believe crashed due to not having enough memory resources allocated to the guest OS via VBox, and not having a swap partition or swap file.
6. Configured locale & timezone, then ran env-update && source /etc/profile && export PS1="(chroot) $PS1"
7. Installed kernel 4.9.16 sources & configured (using options recommended in amd64 manual, VirtualBox guide, & X.org guide)
8. Compiled & installed kernel
9. Performed the following mask to resolve package conflicts in app-emulation/virtualbox-guest-additions:
| Code: | touch /etc/portage/package.mask/x11
nano -w /etc/portage/package.mask/x11
=x11-base/xorg-drivers-1.19:0/0 |
10. downgraded to kernel 4.4.52 due to a bug with guest additions where it won't compile with kernel 4.9
11. verified that startx runs successfully
12. installed layman using the Layman & GNOME without systemd guide
I'm very new to portage and Gentoo in general, so I can only provide my best educated guess as to why I somehow deviated from the defaults. Having said that, I'm pretty sure it has something to do with either installing app-emulation/virtualbox-guest-additions (which in turn installled the xorg server & xorg drivers that are causing conflicts), or it has something to do with the ran emerge --ask --update --deep --newuse @world in step 5 segfaulting.
Thanks again for the reply. |
|
| Back to top |
|
|
dantrell
l33t
Joined: 01 Jun 2007
Posts: 915
Location: Earth
|
| Posted: Mon May 22, 2017 12:49 pm Post subject: |
|
|
| EugeneTheJeep wrote: | | The output is available on the second post of this thread or reposted here [...] |
That's not the emerge command that produced the dbus issue.
The blocker produced by your @world update is an unrelated issue that you need to resolve. Once that's cleared up and if the dbus issue persists, provide the requested information.
| EugeneTheJeep wrote: | | I didn't run it again because the handbook said it was optional for non-systemd profiles. |
Note, as per the project documentation:
| Code: | | emerge --ask --update --deep --changed-use --with-bdeps=y @world |
is not optional.
_________________
Dantrell B. |
|
| Back to top |
|
|
EugeneTheJeep
Tux's lil' helper
Joined: 17 May 2017
Posts: 101
|
| Posted: Mon May 22, 2017 10:33 pm Post subject: |
|
|
My bad; that is definitely not the same command. I resolved & successfully ran
| Code: | emerge --pretend --update --deep --changed-use --with-bdeps=y @world
emerge --ask --update --deep --changed-use --with-bdeps=y @world |
And the output you're looking for is:
| Code: | # emerge --pretend --update --deep --changed-use --with-bdeps=y gnome
These are the packages that would be merged, in order:
Calculating dependencies .... done!
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
x11-libs/gtk+:3
(x11-libs/gtk+-3.14.15:3/14::dantrell-gnome-3-14, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(x11-libs/gtk+-3.22.15:3/3::gentoo, installed) pulled in by
>=x11-libs/gtk+-3.22.0:3[X,wayland?] required by (gnome-base/gnome-control-center-3.22.2-r1:2/2::gentoo, ebuild scheduled for merge)
^^ ^^^^^^^^
(and 3 more with the same problem)
x11-misc/colord:0
(x11-misc/colord-1.2.12:0/2::dantrell-gnome, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(x11-misc/colord-1.3.4:0/2::gentoo, installed) pulled in by
>=x11-misc/colord-1.3.1:0= required by (gnome-extra/gnome-color-manager-3.22.2:0/0::gentoo, ebuild scheduled for merge)
^^ ^^^^^^^^
x11-base/xorg-server:0
(x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(x11-base/xorg-server-1.18.4:0/1.18.4::gentoo, ebuild scheduled for merge) pulled in by
>=x11-base/xorg-server-1.7:0/1.18.4=[-minimal] required by (x11-drivers/xf86-video-virtualbox-5.1.18:0/0::gentoo, installed)
^^^^^^^^^^
(and 2 more with the same problem)
dev-libs/gobject-introspection:0
(dev-libs/gobject-introspection-1.42.0-r1:0/0::dantrell-gnome-3-14, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-libs/gobject-introspection-1.50.0:0/0::gentoo, installed) pulled in by
>=dev-libs/gobject-introspection-1.46.0:= required by (dev-python/pygobject-3.22.0:3/3::gentoo, ebuild scheduled for merge)
^^ ^^^^^^
dev-libs/gobject-introspection-common:0
(dev-libs/gobject-introspection-common-1.42.0:0/0::dantrell-gnome-3-14, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-libs/gobject-introspection-common-1.50.0:0/0::gentoo, ebuild scheduled for merge) pulled in by
>=dev-libs/gobject-introspection-common-1.50.0 required by (dev-libs/gobject-introspection-1.50.0:0/0::gentoo, installed)
^^ ^^^^^^
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by dev-libs/gobject-introspection-1.50.0::gentoo
# required by dev-python/pygobject-3.22.0::gentoo
# required by app-admin/system-config-printer-1.5.7::dantrell-gnome
# required by gnome-base/gnome-control-center-3.22.2-r1::gentoo[cups]
# required by net-libs/gnome-online-accounts-3.22.5::gentoo[gnome]
# required by gnome-base/gvfs-1.30.4::gentoo[gnome-online-accounts]
# required by gnome-base/gnome-3.22.2::gentoo
# required by gnome (argument)
# /var/lib/layman/dantrell-gnome/profiles/targets/gnome/3.14/package.mask:
# Masked to freeze the state of GNOME
=dev-libs/gobject-introspection-common-1.50.0
# required by x11-libs/libnotify-0.7.7-r1::dantrell-gnome
# required by app-admin/system-config-printer-1.5.7::dantrell-gnome
# required by gnome-base/gnome-control-center-3.22.2-r1::gentoo[cups]
# required by net-libs/gnome-online-accounts-3.22.5::gentoo[gnome]
# required by gnome-base/gvfs-1.30.4::gentoo[gnome-online-accounts]
# required by gnome-base/gnome-3.22.2::gentoo
# required by gnome (argument)
# /var/lib/layman/dantrell-gnome/profiles/targets/gnome/3.14/package.mask:
# Masked to freeze the state of GNOME
=dev-libs/glib-2.52.2
NOTE: The --autounmask-keep-masks option will prevent emerge
from creating package.unmask or ** keyword changes.
!!! All ebuilds that could satisfy ">=sys-apps/dbus-1.9.8[systemd]" have been masked.
!!! One of the following masked packages is required to complete your request:
- sys-apps/dbus-1.10.16-r1::gentoo (masked by: ~amd64 keyword)
(dependency required by "sys-apps/systemd-233-r1::gentoo" [ebuild])
(dependency required by "gnome-base/gnome-settings-daemon-3.22.2::gentoo" [ebuild])
(dependency required by "gnome-base/gnome-session-3.22.3::gentoo" [ebuild])
(dependency required by "gnome-base/gnome-control-center-3.22.2-r1::gentoo" [ebuild])
(dependency required by "net-libs/gnome-online-accounts-3.22.5::gentoo[gnome]" [ebuild])
(dependency required by "gnome-base/gvfs-1.30.4::gentoo[gnome-online-accounts]" [ebuild])
(dependency required by "gnome-base/gnome-3.22.2::gentoo" [ebuild])
(dependency required by "gnome" [argument])
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
* IMPORTANT: 11 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items. |
|
|
| Back to top |
|
|
dantrell
l33t
Joined: 01 Jun 2007
Posts: 915
Location: Earth
|
| Posted: Tue May 23, 2017 11:00 pm Post subject: |
|
|
| EugeneTheJeep wrote: | | And the output you're looking for is [...] |
Please share the output of:
| Code: | | eselect profile list |
| Code: | | emerge --search "%@^sys-apps.*systemd$" |
_________________
Dantrell B. |
|
| Back to top |
|
|
EugeneTheJeep
Tux's lil' helper
Joined: 17 May 2017
Posts: 101
|
| Posted: Sat May 27, 2017 3:00 pm Post subject: |
|
|
| Just wanted to update that I decided to go with KDE plasma because the overlays were a bit to complex for my current experience level. (I informed dantrell of this via pm a couple of days ago) I hate to leave a dangling thread. |
|
| Back to top |
|
|
pigeon768
l33t
Joined: 02 Jan 2006
Posts: 683
|
| Posted: Fri Jun 02, 2017 9:35 pm Post subject: |
|
|
| EugeneTheJeep wrote: | This was the output of emerge --deep --with-bdeps=y --changed-use --update --ask --verbose @world : | Code: |
[...snip...]
[ebuild U *] x11-base/xorg-drivers-9999::gentoo [1.18-r1::gentoo] INPUT_DEVICES="keyboard libinput mouse -acecad -aiptek -elographics -evdev -fpit -hyperpen -joystick -mutouch -penmount -synaptics -tslib -vmmouse -void -wacom" VIDEO_CARDS="amdgpu dummy fbdev intel nouveau radeon radeonsi vesa -ast -epson (-fglrx) (-freedreno) (-geode) -glint -i915% -i965% -mga -nv -nvidia (-omap) -qxl -r128 -siliconmotion -tdfx (-tegra) -via -virtualbox -vmware (-voodoo) (-apm%) (-chips%) (-cirrus%) (-i128%) (-i740%) (-mach64%) (-neomagic%) (-rendition%) (-s3%) (-s3virge%) (-savage%) (-sisusb%) (-sunbw2%) (-suncg14%) (-suncg3%) (-suncg6%) (-sunffb%) (-sunleo%) (-suntcx%) (-tga%) (-trident%) (-tseng%)" 0 KiB
[...snip...]
(x11-base/xorg-server-1.19.2:0/1.19.2::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(x11-base/xorg-server-1.18.4:0/1.18.4::gentoo, installed) pulled in by
<x11-base/xorg-server-1.19:0/1.18.4=[-minimal] required by (x11-drivers/xf86-video-virtualbox-5.0.32:0/0::gentoo, installed)
^ ^^^^^^^^^^^^^^
(and 1 more with the same problem) |
|
This is actually where your problem is, it probably has nothing to do with dbus or systemd. You need to set VIDEO_CARDS= and INPUT_DEVICES= in /etc/portage/make.conf to their appropriate values, and you shouldn't unmask xorg-drivers-9999. You may need to manually uninstall some of the extraneous xorg-drivers after removing their respective flags, such as xf86-video-virtualbox.
Note that you don't need INPUT_DEVICES="mouse keyboard". INPUT_DEVICES="libinput" is just fine. |
|
| Back to top |
|
|
ZappingLinux
Tux's lil' helper
Joined: 13 Oct 2017
Posts: 117
Location: Delft, Netherlands
|
| Posted: Fri Oct 13, 2017 9:56 pm Post subject: |
|
|
| Hey guys I hope you dont me poking my head in here. I am experiencing the same problem as the other guy. I followed the guide to the letter but still it tells me that the sys-apps/dbus package is required before I emerge gnome. I am actually installing this on another laptop so I cant copy any text I am afraid. As per the emerge --searcg "%@^sys-apps.*systemd $", it is not installed. I did run the emerge --ask --update --deep --changed-use --with-bdeps=y @world. Also the profile i have selected even before that is dantrell-gnome:default/and64/3.24. Again any help would be lovely! |
|
| Back to top |
|
|
dantrell
l33t
Joined: 01 Jun 2007
Posts: 915
Location: Earth
|
| Posted: Sun Oct 15, 2017 7:28 am Post subject: |
|
|
I also hate to leave a dangling thread. So just for the record...
| EugeneTheJeep wrote: | | Just wanted to update that I decided to go with KDE plasma because the overlays were a bit to complex for my current experience level. (I informed dantrell of this via pm a couple of days ago) I hate to leave a dangling thread. |
This was indeed the case.
| ZappingLinux wrote: | | Hey guys I hope you dont me poking my head in here. I am experiencing the same problem as the other guy. |
And this was resolved here.
_________________
Dantrell B. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Unsupported Software
