Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Can't sync my Raid1 again, only spere was added...
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
boospy
Apprentice
Apprentice


Joined: 07 Feb 2010
Posts: 255
Location: Austria

PostPosted: Fri Jun 28, 2013 9:04 pm    Post subject: Can't sync my Raid1 again, only spere was added... Reply with quote

Hi,

after an crash from an ohter harddisk (not member of this raid) i can't sync my Raid1 again. What have i done? Nothing, i removed this one death disk completly so the devicenames where changed. Before i removed the disk, my raid was SDA and SDC. After i removed the disk my raid was SDA and SDB.
So when ein will resync my raid it look like this:

Code:
Personalities : [linear] [raid0] [raid1]
md1 : active raid1 sda1[0] sdb1[1]
      513984 blocks [2/2] [UU]
     
md2 : active raid1 sdb2[2] sda2[0]
      58099008 blocks [2/1] [U_]
      [=>...................]  recovery =  9.1% (5319936/58099008) finish=17.8min speed=49188K/sec




Personalities : [linear] [raid0] [raid1]
md1 : active raid1 sda1[0] sdb1[1]
      513984 blocks [2/2] [UU]
     
md2 : active raid1 sdb2[2](S) sda2[0]
      58099008 blocks [2/1] [U_]


/dev/md2:
        Version : 0.90
  Creation Time : Wed Nov 23 20:34:33 2011
     Raid Level : raid1
     Array Size : 58099008 (55.41 GiB 59.49 GB)
  Used Dev Size : 58099008 (55.41 GiB 59.49 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 2
    Persistence : Superblock is persistent

    Update Time : Fri Jun 28 22:37:52 2013
          State : clean, degraded
 Active Devices : 1
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 1

           UUID : f106f520:c385765f:e368bf24:bd0fce41
         Events : 0.2478561

    Number   Major   Minor   RaidDevice State
       0       8        2        0      active sync   /dev/sda2
       1       0        0        1      removed

       2       8       18        -      spare   /dev/sdb2


What is the problem here? What must i do to solve the problem?

Regards
boospy
Back to top
View user's profile Send private message
boospy
Apprentice
Apprentice


Joined: 07 Feb 2010
Posts: 255
Location: Austria

PostPosted: Sat Jun 29, 2013 9:12 am    Post subject: Reply with quote

When i take this command:
Code:
mdadm --assemble /dev/md2 /dev/sda2 /dev/sdb2       
mdadm: cannot open device /dev/sda2: Device or resource busy
mdadm: /dev/sda2 has no superblock - assembly aborted

With force it is the same.

And i found this:
Code:
[68062.266992] ata1.00: configured for UDMA/100
[68062.267006] sd 0:0:0:0: [sda] Unhandled sense code
[68062.267011] sd 0:0:0:0: [sda] 
[68062.267014] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[68062.267018] sd 0:0:0:0: [sda] 
[68062.267020] Sense Key : Medium Error [current] [descriptor]
[68062.267025] Descriptor sense data with sense descriptors (in hex):
[68062.267027]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[68062.267038]         02 62 f6 38
[68062.267044] sd 0:0:0:0: [sda] 
[68062.267048] Add. Sense: Unrecovered read error - auto reallocate failed
[68062.267052] sd 0:0:0:0: [sda] CDB:
[68062.267054] Read(10): 28 00 02 62 f6 38 00 00 08 00
[68062.267063] end_request: I/O error, dev sda, sector 40039992
[68062.267077] ata1: EH complete
[68062.267140] md/raid1:md2: sda: unrecoverable I/O read error for block 39011712
[68062.267553] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[68062.267555] ata1.00: irq_stat 0x40000001
[68062.267559] ata1.00: failed command: READ DMA
[68062.267568] ata1.00: cmd c8/00:08:40:f6:62/00:00:00:00:00/e2 tag 0 dma 4096 in
         res 51/40:00:40:f6:62/00:00:00:00:00/e2 Emask 0x9 (media error)
[68062.267572] ata1.00: status: { DRDY ERR }
[68062.267576] ata1.00: error: { UNC }
[68062.290189] ata1.00: configured for UDMA/100
[68062.290203] sd 0:0:0:0: [sda] Unhandled sense code
[68062.290208] sd 0:0:0:0: [sda] 
[68062.290211] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[68062.290215] sd 0:0:0:0: [sda] 
[68062.290217] Sense Key : Medium Error [current] [descriptor]
[68062.290222] Descriptor sense data with sense descriptors (in hex):
[68062.290224]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[68062.290235]         02 62 f6 40
[68062.290241] sd 0:0:0:0: [sda] 
[68062.290245] Add. Sense: Unrecovered read error - auto reallocate failed
[68062.290249] sd 0:0:0:0: [sda] CDB:
[68062.290251] Read(10): 28 00 02 62 f6 40 00 00 08 00
[68062.290261] end_request: I/O error, dev sda, sector 40040000
[68062.290274] ata1: EH complete
[68062.290337] md/raid1:md2: sda: unrecoverable I/O read error for block 39011840
[68063.239704] md: md2: recovery done.
[68063.246722] RAID1 conf printout:
[68063.246728]  --- wd:1 rd:2
[68063.246733]  disk 0, wo:0, o:1, dev:sda2
[68063.246736]  disk 1, wo:1, o:1, dev:sdb2
[68063.257645] RAID1 conf printout:
[68063.257650]  --- wd:1 rd:2
[68063.257654]  disk 0, wo:0, o:1, dev:sda2
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum