View previous topic :: View next topic |
Author |
Message |
borskiy n00b
Joined: 19 Jul 2012 Posts: 8 Location: д.Редькино, Нижегородская губерния, РФ
|
Posted: Thu Jul 19, 2012 6:04 am Post subject: При загрузке с LiveCD не обнаруживаются разделы HDD |
|
|
Здравствуйте.
Такая проблема:
Есть недобук Aspire one. На его штатный SSD (8ГБ) всё устанавливвалось замечательно. Решил поменять винт на более ёмкий и быстрый, ради чего раскурочил SSD Corsair F40. Подпаял, всё отлично детектится и в биосе, и fdisk'ом.
Разбивка на разделы также прошла "на ура". Но на этом моё радужное настроение и закончилось. В /dev разделы не появились ни сразу, ни после перезагрузки. Соответственно, ни создать ФС, ни смонтировать их я не могу. Создал файловые системы из-под загруженной с внешнего винта операционки, снова загрузился с ливСД, разделы не монтируются. Гляжу в /dev - то же самое.
/dev
0:0:0:0
2:0:0:0
block
bsg
btrfs-control
bus
char
console
dac960_gam
device-mapper
discover
disk
err
etherd
event0
event1
event2
event3
fb0
fd
flush
full
fuse
gpmctl
hiddev0
hidraw0
hidraw1
initctl
input
interfaces
kmem
kmsg
log
loop-control
loop0
loop1
loop2
loop3
loop4
loop5
loop6
loop7
mapper
mcelog
md
md126
md127
megadev0
mem
mice
mmcblk0
mouse
mouse0
mouse1
mouse2
mpt2ctl
net
null
port
ppp
psaux
ptmx
pts
ram0
ram1
ram10
ram11
ram12
ram13
ram14
ram15
ram2
ram3
ram4
ram5
ram6
ram7
ram8
ram9
random
revalidate
rfkill
rtc
sda
sdb
sdb1
sg0
sg1
shm
snd
stderr
stdin
stdout
tgt
tty
tty0
tty1
tty10
tty11
tty12
tty13
tty14
tty15
tty16
tty17
tty18
tty19
tty2
tty20
tty21
tty22
tty23
tty24
tty25
tty26
tty27
tty28
tty29
tty3
tty30
tty31
tty32
tty33
tty34
tty35
tty36
tty37
tty38
tty39
tty4
tty40
tty41
tty42
tty43
tty44
tty45
tty46
tty47
tty48
tty49
tty5
tty50
tty51
tty52
tty53
tty54
tty55
tty56
tty57
tty58
tty59
tty6
tty60
tty61
tty62
tty63
tty7
tty8
tty9
ttyS0
ttyS1
ttyS2
ttyS3
urandom
usb
vcs
vcs1
vcs10
vcs11
vcs12
vcs2
vcs3
vcs4
vcs5
vcs6
vcs7
vcs8
vcs9
vcsa
vcsa1
vcsa10
vcsa11
vcsa12
vcsa2
vcsa3
vcsa4
vcsa5
vcsa6
vcsa7
vcsa8
vcsa9
vga_arbiter
zero
dmesg
Linux version 3.2.21-gentoo (root@poseidon) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Tue Jul 10 16:46:38 UTC 2012
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005f376000 (usable)
BIOS-e820: 000000005f376000 - 000000005f3bf000 (reserved)
BIOS-e820: 000000005f3bf000 - 000000005f46d000 (usable)
BIOS-e820: 000000005f46d000 - 000000005f4bf000 (ACPI NVS)
BIOS-e820: 000000005f4bf000 - 000000005f4f0000 (usable)
BIOS-e820: 000000005f4f0000 - 000000005f4ff000 (ACPI data)
BIOS-e820: 000000005f4ff000 - 000000005f500000 (usable)
BIOS-e820: 000000005f500000 - 0000000060000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.4 present.
DMI: Acer AOA110/ , BIOS v0.3309 10/06/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x5f500 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFFE0000 mask 0FFFE0000 write-protect
1 base 0FFFC0000 mask 0FFFE0000 uncachable
2 base 000000000 mask 0C0000000 write-back
3 base 040000000 mask 0E0000000 write-back
4 base 05F800000 mask 0FF800000 uncachable
5 base 05F600000 mask 0FFE00000 uncachable
6 base 05F500000 mask 0FFF00000 uncachable
7 base 000000000 mask 0FFFE0000 uncachable
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
initial memory mapped : 0 - 01800000
Base memory trampoline at [c009e000] 9e000 size 4096
init_memory_mapping: 0000000000000000-0000000037f13000
0000000000 - 0037f13000 page 4k
kernel direct mapping tables up to 37f13000 @ 171d000-1800000
RAMDISK: 5ee1f000 - 5f375000
Allocated new RAMDISK: 379bd000 - 37f12d65
Move RAMDISK from 000000005ee1f000 - 000000005f374d64 to 379bd000 - 37f12d64
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 5f4fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 5f4fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 5f4f2000 05DE6 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 5f488000 00040
ACPI: SSDT 5f4fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
ACPI: HPET 5f4fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 5f4fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 5f4f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASF! 5f4f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 5f4f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 5f4f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
mapped low ram: 0 - 37f13000
low ram: 0 - 37f13000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037f13
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00037f13
On node 0 totalpages: 229026
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1759 pages used for memmap
Normal zone: 223284 pages, LIFO batch:31
Using APIC driver default
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at 60000000 (gap: 60000000:80000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f729f000 s25216 r0 d23936 u49152
pcpu-alloc: s25216 r0 d23936 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227235
Kernel command line: initrd=/ubninit root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot vga=791 BOOT_IMAGE=/ubnkern
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Memory: 896324k/916556k available (3441k kernel code, 19780k reserved, 1294k data, 396k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
vmalloc : 0xf8713000 - 0xfff13000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7f13000 ( 895 MB)
.init : 0xc14a0000 - 0xc1503000 ( 396 kB)
.data : 0xc135c47f - 0xc149ff80 (1294 kB)
.text : 0xc1000000 - 0xc135c47f (3441 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6c06000 soft=f6c08000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1596.002 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.00 BogoMIPS (lpj=15960020)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f6c8e000 soft=f6c90000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9e000
Initializing CPU#1
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
Brought up 2 CPUs
Total of 2 processors activated (6383.98 BogoMIPS).
devtmpfs: initialized
Acer Aspire One A110 series board detected. Selecting KBD-method for reboot.
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 5f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 5f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 5f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 5f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c3c680), AE_ALREADY_EXISTS (20110623/psparse-536)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff]
pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0x78480000-0x784fffff]
pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7]
pci 0000:00:02.0: reg 18: [mem 0x60000000-0x6fffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0x78500000-0x7853ffff]
pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0x78400000-0x7847ffff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0x78540000-0x78543fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0x78544400-0x785447ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x77300000-0x783fffff]
pci 0000:00:1c.0: bridge window [mem 0x70000000-0x70ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:02:00.0: reg 18: [mem 0x71010000-0x71010fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0x71000000-0x7100ffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0x76300000-0x772fffff]
pci 0000:00:1c.1: bridge window [mem 0x71000000-0x720fffff 64bit pref]
pci 0000:03:00.0: [168c:001c] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [mem 0x75200000-0x7520ffff 64bit]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0x75200000-0x762fffff]
pci 0000:00:1c.2: bridge window [mem 0x72100000-0x730fffff 64bit pref]
pci 0000:04:00.0: [197b:2382] type 0 class 0x000880
pci 0000:04:00.0: reg 10: [mem 0x74100300-0x741003ff]
pci 0000:04:00.0: reg 30: [mem 0xffff8000-0xffffffff pref]
pci 0000:04:00.2: [197b:2381] type 0 class 0x000805
pci 0000:04:00.2: reg 10: [mem 0x74100200-0x741002ff]
pci 0000:04:00.3: [197b:2383] type 0 class 0x000880
pci 0000:04:00.3: reg 10: [mem 0x74100100-0x741001ff]
pci 0000:04:00.4: [197b:2384] type 0 class 0x000880
pci 0000:04:00.4: reg 10: [mem 0x74100000-0x741000ff]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.3: bridge window [mem 0x74100000-0x751fffff]
pci 0000:00:1c.3: bridge window [mem 0x73100000-0x740fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x60000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c3c680), AE_ALREADY_EXISTS (20110623/psparse-536)
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x09)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000005f376000 - 000000005fffffff
reserve RAM buffer: 000000005f46d000 - 000000005fffffff
reserve RAM buffer: 000000005f4f0000 - 000000005fffffff
reserve RAM buffer: 000000005f500000 - 000000005fffffff
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x60000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x002e-0x002f]
pnp 00:01: [io 0x0068-0x006f]
pnp 00:01: [io 0x0200-0x020f]
pnp 00:01: [io 0x164e-0x164f]
pnp 00:01: [io 0x0061]
pnp 00:01: [io 0x0070]
pnp 00:01: [io 0x0080]
pnp 00:01: [io 0x0092]
pnp 00:01: [io 0x00b2-0x00b3]
pnp 00:01: [io 0x0063]
pnp 00:01: [io 0x0065]
pnp 00:01: [io 0x0067]
pnp 00:01: [io 0x0600-0x060f]
pnp 00:01: [io 0x0610]
pnp 00:01: [io 0x0800-0x080f]
pnp 00:01: [io 0x0400-0x047f]
pnp 00:01: [io 0x0500-0x053f]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed14000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0xfed19000-0xfed19fff]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: [mem 0xfee00000-0xfee00fff]
pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 7 [io 0x1000-0x1fff]
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0x0600-0x060f] has been reserved
system 00:01: [io 0x0610] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0077]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [mem 0xff800000-0xffffffff]
pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x77300000-0x783fffff]
pci 0000:00:1c.0: bridge window [mem 0x70000000-0x70ffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0x71020000-0x7103ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0x76300000-0x772fffff]
pci 0000:00:1c.1: bridge window [mem 0x71000000-0x720fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0x75200000-0x762fffff]
pci 0000:00:1c.2: bridge window [mem 0x72100000-0x730fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0x73100000-0x73107fff pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.3: bridge window [mem 0x74100000-0x751fffff]
pci 0000:00:1c.3: bridge window [mem 0x73100000-0x740fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x60000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0x77300000-0x783fffff]
pci_bus 0000:01: resource 2 [mem 0x70000000-0x70ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0x76300000-0x772fffff]
pci_bus 0000:02: resource 2 [mem 0x71000000-0x720fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x75200000-0x762fffff]
pci_bus 0000:03: resource 2 [mem 0x72100000-0x730fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x74100000-0x751fffff]
pci_bus 0000:04: resource 2 [mem 0x73100000-0x740fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x60000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.7: PCI INT A disabled
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5464k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.30 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 1761
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.3: setting latency timer to 64
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
intel_rng: FWH not detected
Linux agpgart interface v0.103
vesafb: mode is 800x600x32, linelength=3200, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0x60000000, mapped to 0xf8780000, using 3750k, total 7872k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.8
aoe: AoE v47 initialised.
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 396k freed
Write protecting the kernel text: 3444k
Write protecting the kernel read-only data: 1112k
libata version 3.00 loaded.
Refined TSC clocksource calibration: 1595.999 MHz.
Switching to clocksource tsc
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
ata1.00: ATA-8: Corsair CSSD-F40GB2, 2.0, max UDMA/133
ata1.00: 78161328 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F40 2.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78161328 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input1
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-7[28000]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.27
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
mpt2sas version 10.100.00.00 loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x78544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.21-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-3: new high-speed USB device number 3 using ehci_hcd
usb 1-3: New USB device found, idVendor=13fe, idProduct=3600
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: silicon-power
usb 1-3: Manufacturer:
usb 1-3: SerialNumber: 10101930E6AA1F0002CB01FB
usb-storage 1-3:1.0: Quirks match for vid 13fe pid 3600: 4000
scsi2 : usb-storage 1-3:1.0
usb 1-5: new high-speed USB device number 4 using ehci_hcd
usb 1-5: New USB device found, idVendor=0c45, idProduct=62c0
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-5: Product: USB 2.0 Camera
usb 1-5: Manufacturer: Sonix Technology Co., Ltd.
usb 2-2: new full-speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=09da, idProduct=054f
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Device
usb 2-2: Manufacturer: A4TECH
input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
generic-usb 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-2/input0
input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
generic-usb 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-2/input1
scsi 2:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 41 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1 175 MB/s
raid6: int32x2 258 MB/s
raid6: int32x4 280 MB/s
raid6: int32x8 303 MB/s
raid6: mmxx1 360 MB/s
raid6: mmxx2 724 MB/s
raid6: sse1x1 296 MB/s
raid6: sse1x2 523 MB/s
raid6: sse2x1 503 MB/s
raid6: sse2x2 944 MB/s
raid6: using algorithm sse2x2 (944 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 4877.600 MB/sec
xor: using function: pIII_sse (4877.600 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded
JFS: nTxBlock = 7048, nTxLock = 56386
fuse init (API version 7.17)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5395 to a partition!
mount: sending ioctl 5395 to a partition!
UDF-fs: warning (device sda2): udf_fill_super: No partition found (1)
REISERFS (device sda3): found reiserfs format "3.6" with standard journal
REISERFS (device sda3): using ordered data mode
reiserfs: using flush barriers
REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda3): checking transaction log (sda3)
REISERFS (device sda3): Using r5 hash to sort names
udev[19837]: starting version 164
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: eth0: RTL8102e at 0xf9dbc000, 00:1e:68:a4:39:f7, XID 04a00000 IRQ 17
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI: Battery Slot [BAT1] (battery present)
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:04:00.2: PCI INT A disabled
Switching to clocksource hpet
cfg80211: Calling CRDA to update world regulatory domain
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
Real Time Clock Driver v1.12b
ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:03:00.0: setting latency timer to 64
ath5k 0000:03:00.0: registered as 'phy0'
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Blacklisted hardware detected - not loading
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'pid'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
scsi_verify_blk_ioctl: 2 callbacks suppressed
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
md: md127 stopped.
md: bind<sda>
md: md126 stopped.
md: bind<sda>
bio: create slab <bio-1> at 1
md/raid0:md126: too few disks (1 of 2) - aborting!
md: pers->run() failed ...
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Blacklisted hardware detected - not loading
warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
NET: Registered protocol family 10
Если гружусь с USB-шного диска, всё нормально находится и монтируется:
http://foto.nnov.org/psh1024/0/ee/58/3eca03727ba1e8fcbaf9690c.png
Посоветуйте, пожалуйста, как заставить минимальный лив работать с этими разделами? |
|
Back to top |
|
|
burik666 n00b
Joined: 28 Jan 2007 Posts: 51 Location: Санкт-Петербург
|
Posted: Fri Jul 20, 2012 12:04 pm Post subject: |
|
|
попробуйте или Code: | mknod /dev/sda1 b 8 1
mknod /dev/sda2 b 8 2
mknod /dev/sda3 b 8 3 |
_________________ Linux for you
gentoo.bloodhost.ru Gentoo mirror (Russia, Saint-Petersburg) |
|
Back to top |
|
|
borskiy n00b
Joined: 19 Jul 2012 Posts: 8 Location: д.Редькино, Нижегородская губерния, РФ
|
Posted: Thu Aug 02, 2012 8:12 am Post subject: |
|
|
Спасибо огромное!
Первый вариант сработал.
Рано обрадовался.
Разделы появились, но монтироваться всё равно не хотят. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|