Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] ESXI 5.0 Kernel + xtables-addons
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish)
View previous topic :: View next topic  
Author Message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Fri Jul 13, 2012 9:22 pm    Post subject: [SOLVED] ESXI 5.0 Kernel + xtables-addons Reply with quote

Probuje skompiowac na swoim VPSie na esxi paczke xtables-addons. Zaczynaja sie schody tutaj:
Code:
emerge -vq xtables-addons
...
cc1: some warnings being treated as errors
make[2]: *** [/var/tmp/portage/net-firewall/xtables-addons-1.39/work/xtables-addons-1.39/extensions/compat_xtables.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [_module_/var/tmp/portage/net-firewall/xtables-addons-1.39/work/xtables-addons-1.39/extensions] Error 2
make[1]: Leaving directory `/usr/src/linux-3.2.16-gentoo'
make: *** [modules] Error 2
 * ERROR: net-firewall/xtables-addons-1.39 failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=net-firewall/xtables-addons-1.39'`,
 * the complete build log and the output of `emerge -pqv '=net-firewall/xtables-addons-1.39'`.
 * The complete build log is located at '/var/tmp/portage/net-firewall/xtables-addons-1.39/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-firewall/xtables-addons-1.39/temp/environment'.
 * Working directory: '/var/tmp/portage/net-firewall/xtables-addons-1.39/work/xtables-addons-1.39/extensions'
 * S: '/var/tmp/portage/net-firewall/xtables-addons-1.39/work/xtables-addons-1.39'

>>> Failed to emerge net-firewall/xtables-addons-1.39, Log file:

>>>  '/var/tmp/portage/net-firewall/xtables-addons-1.39/temp/build.log'

 * Messages for package net-firewall/xtables-addons-1.39:

 *   Please, enable CONFIG_CONNECTOR if you wish to receive userspace notifications from pknock through netlink/connector
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 * NETFILTER_XT_TARGET_TEE should be provided by the kernel. Skipping its build...
 * ERROR: net-firewall/xtables-addons-1.39 failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=net-firewall/xtables-addons-1.39'`,
 * the complete build log and the output of `emerge -pqv '=net-firewall/xtables-addons-1.39'`.
 * The complete build log is located at '/var/tmp/portage/net-firewall/xtables-addons-1.39/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-firewall/xtables-addons-1.39/temp/environment'.
 * Working directory: '/var/tmp/portage/net-firewall/xtables-addons-1.39/work/xtables-addons-1.39/extensions'
 * S: '/var/tmp/portage/net-firewall/xtables-addons-1.39/work/xtables-addons-1.39'
Na szybko uzylem genkernela bo problem mialem przy starcie z lsmod samego kernela. Czy moze ktos z Was polecic jakis kernel do tego ewentualnie jak rozwiazac ten problem? W kernelu niby mam:
Code:
  x Symbol: NETFILTER_XT_TARGET_TEE [=m]
Type  : tristate
Prompt: "TEE" - packet cloning to alternate destination
Defined at net/netfilter/Kconfig:563
Depends on: NET [=y] && INET [=y] && NETFILTER [=y] && NETFILTER_XTABLES [=m] && NETFILTER_ADVANCED [=y] && (IPV6 [=m] || IPV6 [=m]=n)
Location:
    -> Networking support (NET [=y])
     -> Networking options
     -> Network packet filtering framework (Netfilter) (NETFILTER [=y])
         -> Core Netfilter Configuration
           -> Netfilter Xtables support (required for ip_tables) (NETFILTER_XTABLES [=m])
Jednak blad nadal jest. Byc moze to wynika ze zlej konfiguracji kernela, dlatego z ciekawosic pytam czy ktos mial z Was z tym stycznosc i czy moze jakas konfiguracje standardowa kernela polecic + toolsy do tego.
_________________
gg: 525600


Last edited by soban_ on Mon Jul 16, 2012 10:27 pm; edited 3 times in total
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Fri Jul 13, 2012 11:35 pm    Post subject: Reply with quote

TEE przez jakiś czas było i w kernelu i w xtables równocześnie, i na tym się potrafił xtables z ebuilda wywalić.
Poza tym co to za jajo?
Pytam, bo w ebuildach najmłodsza wersja xtables to ~1,39, która u mnie od jakiegoś czasu w ogóle nie zamierzała się skompilować na świeżych jajkach, dlatego mam kompilowaną z palca, (wersję 1.42) w ten sposób:
Code:
cd /usr/src/xtables*
./configure --enable-static --prefix=/usr --with-kbuild=/usr/src/linux
make
make install

i ten działa bez problemu (do następnego jajka wezmę 1.43 - już jest).
http://xtables-addons.sourceforge.net/

Edyta:
Mam najnowszą 1.43 i wsio chodzi prawidłowo, włącznie z Geoip, któregó konfiguracja (bazy adresów IP) stała się banalnie prosta:
Code:
/usr/libexec/xtables-addons/xt_geoip_dl
  /usr/libexec/xtables-addons/xt_geoip_build -D /usr/share/xt_geoip *.csv


W poprzednich wersjach (1.2* i 1.3*) było z tym znacznie więcej roboty... ;)

Pozdrawiam
8)


Last edited by Jacekalex on Tue Jul 17, 2012 10:50 am; edited 2 times in total
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Sat Jul 14, 2012 11:30 am    Post subject: Reply with quote

To jest wersja kernela:
Code:
uname -a
Linux soban-vps 3.2.16-gentoo #2 SMP Fri Jul 13 21:10:55 Local time zone must be set--see zic  x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux

Jednak po rozpakowaniu i odpaleniu:
Code:
wget http://ignum.dl.sourceforge.net/project/xtables-addons/Xtables-addons/1.43/xtables-addons-1.43.tar.xz
tar -xf xtables-addons-1.43.tar.xz
cd xtables-addons-1.43
./configure --enable-static --prefix=/usr --with-kbuild=/usr/src/linux
make
make install
iptables -I INPUT -m geoip ! --src-cc PL -j DROP
Could not open /usr/share/xt_geoip/LE/PL.iv4: No such file or directory
iptables v1.4.13: Could not read geoip database

Zas jesli chodzi o:
Code:
 /usr/libexec/xtables-addons/xt_geoip_build -D /usr/share/xt_geoip *.csv
Target directory /usr/share/xt_geoip does not exist.
/usr/libexec/xtables-addons/xt_geoip_dl <- to sie poprawnie wykonalo.
Dlatego pytam sie, czy ktos moze juz bawil sie z ESXi i ma oczyszczonego kernela, bo wydaje mi sie ze to w nim tkwi problem.
//EDIT
Z emerge jednak tez poszlo, wystarczylo:
Code:
USE="-modules" emerge -av xtables-addons
Jednak blad jest nadal ten sam, nigdy z tym doswiadczenia nie mialem wiec teraz mysle ze to ja cos zwalilem : P chyba tutaj tkwi problem, zeby zaladowac cala baze "Could not read geoip database", wiec na razie googlam.
_________________
gg: 525600


Last edited by soban_ on Sat Jul 14, 2012 12:01 pm; edited 1 time in total
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Sat Jul 14, 2012 1:41 pm    Post subject: Reply with quote

Soban wrote:
Code:
Target directory /usr/share/xt_geoip does not exist.

Wczoraj z palca zrobiłem folder, bo też tak miauczał:
Code:
mkdir -p /usr/share/xt_geoip

Bbbaaaaarrrrrddddzzzzoooo tttttrrrrruuuuuudddddnnnnneeeee, prawda? :)

Code:
/usr/libexec/xtables-addons/xt_geoip_dl
--2012-07-14 15:38:22--  http://geolite.maxmind.com/download/geoip/database/GeoIPv6.csv.gz
Translacja geolite.maxmind.com... 174.36.207.186
Łączenie się z geolite.maxmind.com|174.36.207.186|:80... połączono.
Żądanie HTTP wysłano, oczekiwanie na odpowiedź... 200 OK
Długość: 477742 (467K) [application/octet-stream]
Zapis do: `GeoIPv6.csv.gz'

100%[======================================>] 477.742      431K/s   w  1,1s   

2012-07-14 15:38:24 (431 KB/s) - zapisano `GeoIPv6.csv.gz' [477742/477742]

--2012-07-14 15:38:26--  http://geolite.maxmind.com/download/geoip/database/GeoIPCountryCSV.zip
Ponowne użycie połączenia do geolite.maxmind.com:80.
Żądanie HTTP wysłano, oczekiwanie na odpowiedź... 200 OK
Długość: 2440632 (2,3M) [application/zip]
Zapis do: `GeoIPCountryCSV.zip'

100%[======================================>] 2.440.632    963K/s   w  2,5s   

2012-07-14 15:38:28 (963 KB/s) - zapisano `GeoIPCountryCSV.zip' [2440632/2440632]

FINISHED --2012-07-14 15:38:28--
Total wall clock time: 6,0s
Downloaded: 2 files, 2,8M in 3,6s (801 KB/s)
Archive:  GeoIPCountryCSV.zip
  inflating: GeoIPCountryWhois.csv


Code:
  /usr/libexec/xtables-addons/xt_geoip_build -D /usr/share/xt_geoip *.csv
179806 entries total
    0 IPv6 ranges for A1 Anonymous Proxy
  345 IPv4 ranges for A1 Anonymous Proxy
    0 IPv6 ranges for A2 Satellite Provider
 1628 IPv4 ranges for A2 Satellite Provider
    1 IPv6 ranges for AD Andorra
   26 IPv4 ranges for AD Andorra
   18 IPv6 ranges for AE United Arab Emirates
  406 IPv4 ranges for AE United Arab Emirates
    2 IPv6 ranges for AF Afghanistan
  215 IPv4 ranges for AF Afghanistan
    0 IPv6 ranges for AG Antigua and Barbuda
  118 IPv4 ranges for AG Antigua and Barbuda
    0 IPv6 ranges for AI Anguilla
.......
    9 IPv6 ranges for ZM Zambia
   78 IPv4 ranges for ZM Zambia
    7 IPv6 ranges for ZW Zimbabwe
   92 IPv4 ranges for ZW Zimbabwe


Code:
iptables -I INPUT -m geoip ! --src-cc PL -j DROP && echo dziala || echo "nie działa"
dziala


SOA#1

To by było na tyle
8)
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Sat Jul 14, 2012 5:56 pm    Post subject: Reply with quote

SOA #16
Code:
/usr/libexec/xtables-addons/xt_geoip_build -D /usr/share/xt_geoip *.csv
...
    9 IPv6 ranges for ZM Zambia
   78 IPv4 ranges for ZM Zambia
    7 IPv6 ranges for ZW Zimbabwe
   92 IPv4 ranges for ZW Zimbabwe

iptables -I INPUT -m geoip ! --src-cc PL -j DROP && echo dziala || echo "nie działa"
iptables v1.4.13: Couldn't load target `standard':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
nie działa
Trudne moze i nie jest, ale problematyczne - myslalem ze emerge zalatwi calosc.
_________________
gg: 525600
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Sat Jul 14, 2012 10:08 pm    Post subject: Reply with quote

Quote:
Code:
iptables v1.4.13: Couldn't load target `standard':No such file or directory


Co za xtables-addons masz w tej chwili i skąd?
Ja mam kompilowane z palca, i chodzi.

Zobacz w dmesg, co jest grane.

Może w jaju czegoś brakuje do xtables?
Jakiś inny moduł z xtables, np TARPIT czy DELUDE działa?
Czy gremialnie wszystkie nie działąją?


Last edited by Jacekalex on Sun Jul 15, 2012 11:04 am; edited 1 time in total
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Sun Jul 15, 2012 10:24 am    Post subject: Reply with quote

Wiesz co? Z tego i z tego wywala ten sam blad - bo przed chwila przetestowalem (palca/emerge). Wiec raczej przyczyna tkwi w kernelu, zaraz bede szukac i dam znac jak cos znajde. Jakiegos how-to nie ma do tego?

//EDIT
LOL, przed chwila zrekompilowalem (emerge -vq iptables) iptables i smiga, dzieki @Jacekalex za cierpliwosc i za pomoc.
_________________
gg: 525600
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Sun Jul 15, 2012 11:07 am    Post subject: Reply with quote

soban_ wrote:

.....
//EDIT
LOL, przed chwila zrekompilowalem (emerge -vq iptables) iptables i smiga, dzieki @Jacekalex za cierpliwosc i za pomoc.

Niezgodność nagłówków kernela i iptables (jedne i drugie z dwóch rożnych parafii)?
Zdaża się, choć xtables chyba powinno się wywalić na kompilacji w takim przypadku.

Pozdro
8)
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Mon Jul 16, 2012 6:30 pm    Post subject: Reply with quote

Dobra, jestem zmuszony odnowic temat. Skompilowalem nowego kernela w ktorym oczywiscie jako modul jest tee. Jednak teraz wyala mi taki:
Code:
iptables -I INPUT -m geoip ! --src-cc PL -j DROP
iptables: No chain/target/match by that name.
Rekompilowalem juz
Code:
USE="-modules" emerge -av xtables-addons iptables
Blad jednak jest nadal taki sam, jakies pomysly? (-: Ewentualnie co moge zapodac, co moze naprowadzic na trop bledu. Tak sie prezentuje moj kernel:
Code:
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
CONFIG_DEFAULT_HOSTNAME="srvbi"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_FANOUT=64
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_SGI_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_ZONE_DMA=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_MCORE2=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_CLEANCACHE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_X86_PM_TIMER=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_LRO=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=y
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_NET_SCHED=y
CONFIG_NET_CLS=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_CLS_ACT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DNS_RESOLVER=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DEVRES=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_VMWARE_BALLOON=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_BUSLOGIC=m
CONFIG_VMWARE_PVSCSI=y
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_ATA_PIIX=y
CONFIG_PATA_AMD=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_BLK_DEV_DM=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_MII=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_IXGBEVF=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_VMXNET3=y
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_KCOPY=m
CONFIG_DEVKMEM=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
CONFIG_HPET=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_POWER_SUPPLY=y
CONFIG_HWMON=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_MFD_CORE=y
CONFIG_LPC_SCH=y
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_VMWGFX=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_EFI=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_EDAC=y
CONFIG_EDAC_DECODE_MCE=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_DMADEVICES=y
CONFIG_UIO=y
CONFIG_STAGING=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_VIRT_DRIVERS=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DMIID=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_GENERIC_ACL=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_PROC_FS=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_CIFS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BRANCH_PROFILE_NONE=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_DEFAULT_SECURITY_SELINUX=y
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_HW=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
Cos przeoczylem w nim?
_________________
gg: 525600
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Mon Jul 16, 2012 9:13 pm    Post subject: Reply with quote

A co mowi na temat błędu:
dmesg i logi systemowe?

Bo prawdopodobnie coś namieszales z jajem.

Sprobuj z palca załadować moduł geoip, i zobacz, jaki będzie rezultat.
Code:
modprobe -v xt_geoip
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Mon Jul 16, 2012 9:31 pm    Post subject: Reply with quote

Code:
soban-org linux # modprobe -v xt_geoip
FATAL: Module xt_geoip not found.
dmesg:
Code:
[261554.983302] xt_geoip: disagrees about version of symbol xtnu_register_matches
[261554.983335] xt_geoip: Unknown symbol xtnu_register_matches
[261554.983389] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[261554.983420] xt_geoip: Unknown symbol xtnu_unregister_matches
[261621.075336] xt_geoip: disagrees about version of symbol xtnu_register_matches
[261621.075388] xt_geoip: Unknown symbol xtnu_register_matches
[261621.075493] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[261621.075538] xt_geoip: Unknown symbol xtnu_unregister_matches
[261644.144118] xt_geoip: disagrees about version of symbol xtnu_register_matches
[261644.144171] xt_geoip: Unknown symbol xtnu_register_matches
[261644.144318] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[261644.144366] xt_geoip: Unknown symbol xtnu_unregister_matches
[261685.877650] authserver[10777]: segfault at 4d0 ip 00007f54975533b4 sp 00007fffb29c3f20 error 4 in libmysqlclient_r.so.16.0.0.dpkg-new (deleted)[7f54974f8000+1d0000]
[262260.689108] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262260.689158] xt_geoip: Unknown symbol xtnu_register_matches
[262260.689285] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262260.689329] xt_geoip: Unknown symbol xtnu_unregister_matches
[262452.825769] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262452.825816] xt_geoip: Unknown symbol xtnu_register_matches
[262452.825948] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262452.825997] xt_geoip: Unknown symbol xtnu_unregister_matches
[262483.535987] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262483.536024] xt_geoip: Unknown symbol xtnu_register_matches
[262483.536098] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262483.536137] xt_geoip: Unknown symbol xtnu_unregister_matches
[262603.136387] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262603.136443] xt_geoip: Unknown symbol xtnu_register_matches
[262603.136550] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262603.136593] xt_geoip: Unknown symbol xtnu_unregister_matches
[262638.297538] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262638.297589] xt_geoip: Unknown symbol xtnu_register_matches
[262638.297707] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262638.297761] xt_geoip: Unknown symbol xtnu_unregister_matches
[262757.753457] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262757.753491] xt_geoip: Unknown symbol xtnu_register_matches
[262757.753544] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262757.753576] xt_geoip: Unknown symbol xtnu_unregister_matches
[262926.265000] xt_geoip: disagrees about version of symbol xtnu_register_matches
[262926.265047] xt_geoip: Unknown symbol xtnu_register_matches
[262926.265155] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[262926.265198] xt_geoip: Unknown symbol xtnu_unregister_matches
[265255.368723] xt_geoip: disagrees about version of symbol xtnu_register_matches
[265255.368759] xt_geoip: Unknown symbol xtnu_register_matches
[265255.368835] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[265255.368868] xt_geoip: Unknown symbol xtnu_unregister_matches
[283190.027439] xt_geoip: disagrees about version of symbol xtnu_register_matches
[283190.027474] xt_geoip: Unknown symbol xtnu_register_matches
[283190.027552] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[283190.027584] xt_geoip: Unknown symbol xtnu_unregister_matches
[289783.847614] worldserver[19599] general protection ip:1229a38 sp:7f047b3fca38 error:0 in worldserver[400000+11c8000]
[295225.281285] xt_geoip: disagrees about version of symbol xtnu_register_matches
[295225.281332] xt_geoip: Unknown symbol xtnu_register_matches
[295225.281434] xt_geoip: disagrees about version of symbol xtnu_unregister_matches
[295225.281484] xt_geoip: Unknown symbol xtnu_unregister_matches
No chyba jednak jest problem z modulem tym.
_________________
gg: 525600
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Mon Jul 16, 2012 9:38 pm    Post subject: Reply with quote

Jezeli to jest kernel powyżej 3.2.x - to u mnie w ogóle xtables z rosliny nie chciało się kompilować, dlatego mam kompilowanego ręcznie.

A jeśli puściłeś przez emerge z flaga -modules, to zgodnie z życzeniem nie zbudowal modułów, emerge jest grzeczny, i życzenie administratora jest dla niego rozkazem :D

weź, zajrzyj sobie do wyniku:
Code:
equery u xtables-addons


Last edited by Jacekalex on Mon Jul 16, 2012 11:33 pm; edited 1 time in total
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Mon Jul 16, 2012 9:42 pm    Post subject: Reply with quote

Code:
linux # equery u xtables-addons
[ Legend : U - final flag setting for installation]
[        : I - package is installed with flag     ]
[ Colors : set, unset                             ]
 * Found these USE flags for net-firewall/xtables-addons-1.39:
 U I
 + - modules                    : Build the kernel modules
 + + xtables_addons_account     : ACCOUNT target is a high performance accounting system for large local networks
 + + xtables_addons_chaos       : CHAOS target causes confusion on the other end by doing odd things with incoming packets
 - - xtables_addons_checksum    : CHECKSUM target computes and fills in the checksum in a packet that lacks a checksum
 + + xtables_addons_condition   : matches if a specific condition variable is (un)set
 + + xtables_addons_delude      : DELUDE target will reply to a SYN packet with SYN-ACK, and to all other packets with an RST
 + + xtables_addons_dhcpmac     : DHCPMAC target/match in conjunction with ebtables can be used to completely change all MAC addresses from and to a
                                  VMware-based virtual machine
 - - xtables_addons_dnetmap     : DNETMAP target  allows dynamic two-way 1:1 mapping of IPv4 subnets
 - - xtables_addons_echo        : ECHO target sends back all packets it received
 + + xtables_addons_fuzzy       : matches a rate limit based on a fuzzy logic controller (FLC)
 + + xtables_addons_geoip       : match a packet by its source or destination country
 - - xtables_addons_gradm       : match packets based on grsecurity RBAC status
 + + xtables_addons_iface       : match allows to check interface states
 + + xtables_addons_ipmark      : IPMARK target allows mark a received packet basing on its IP address
 + + xtables_addons_ipp2p       : matches certain packets in P2P flows
 - - xtables_addons_ipset6      : enables build of ipset-6.x related modules and tools
 + + xtables_addons_ipv4options : match against a set of IPv4 header options
 + + xtables_addons_length2     : matches the length of a packet against a specific value or range of values
 + + xtables_addons_logmark     : LOGMARK target will log packet and connection marks to syslog
 + + xtables_addons_lscan       : match detects simple low-level scan attemps based upon the packet's contents
 + + xtables_addons_pknock      : match implements so-called "port knocking", a stealthy system for network authentication
 + + xtables_addons_psd         : match attempts to detect TCP and UDP port scans (derived from Solar Designer's scanlogd)
 + + xtables_addons_quota2      : match implements a named counter which can be increased or decreased on a per-match basis
 + + xtables_addons_rawnat      : The RAWSNAT and RAWDNAT targets provide stateless network address translation
 + + xtables_addons_steal       : STEAL target is like DROP, but does not throw an error when used in the OUTPUT chain
 + + xtables_addons_sysrq       : SYSRQ target allows to remotely trigger sysrq on the local machine over the network
 + + xtables_addons_tarpit      : TARPIT target captures and holds incoming TCP connections using no local per-connection resources
 + + xtables_addons_tee         : TEE target will clone a packet and redirect this clone to another machine on the local network segment
Wersja kernela
Code:
linux # uname -a
Linux soban 3.4.4-gentoo #3 SMP PREEMPT Mon Jul 16 18:28:49 Local time zone must be set-- x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux
Czyli mowisz zebym lepiej z palca tym razem polecial niz z portage?
_________________
gg: 525600
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Mon Jul 16, 2012 9:58 pm    Post subject: Reply with quote

Spróbować możesz.

W roślinie jest prehistoryczna wersja 1.39, na stronie xtables jest 1.43.
U mnie 1.43 chodzi bez problemu.
Przepis na kompilację masz tutaj.

A to mój kernel, na którym w tej chwili działa ten cały bajzel. :)

Pozdrawiam
8)
Back to top
View user's profile Send private message
soban_
l33t
l33t


Joined: 27 Aug 2008
Posts: 668
Location: /home/soban

PostPosted: Mon Jul 16, 2012 10:26 pm    Post subject: Reply with quote

Jednak instalacja z emerge to porazka, masz racje trzeba instalowac z palca. Smiga znowu jak trzeba - thx again, and again, and again... (-:
_________________
gg: 525600
Back to top
View user's profile Send private message
SlashBeast
Moderator
Moderator


Joined: 23 May 2006
Posts: 2824

PostPosted: Tue Jul 17, 2012 9:58 am    Post subject: Reply with quote

Chyba juz lepiej wlozyc w to troche wysilku, poprawic ebuilda i wyslac na bugzille. Tak to juz dziala.
_________________
BitBucket -- better-initramfs to address many usecases and linux's limitations.
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 492

PostPosted: Tue Jul 17, 2012 10:23 am    Post subject: Reply with quote

SlashBeast wrote:
Chyba juz lepiej wlozyc w to troche wysilku, poprawic ebuilda i wyslac na bugzille. Tak to juz dziala.

Żebym wiedział, jak to zrobić dobrze i fachowo, to chętnie.
Ale z xtables jest drobny szczegół, który upodabnia sposob budowy do mplayera.

W stadnardowym ebuildzie masz flagi, i czasem się taka kompilacja wykłada, jak czegoś tam nie ma w systemie, lub jest w innej wersji.
Tymczasem odpalając .configure, make i make install, widze, ze mplayer sam sobie sprawdza, jakie biblioteki sa, jakich nie ma, i czaasami łatwiej skompilować go z palca, niż z ebuilda.

Skrypt konfiguracyjny xtables też sam sie dopasowuje do sytuacji w systemie, jest w systemie ipv6 - to włączy ipv6, i np nie wywali się na kompilacji dlatego, że ma kompilować moduł TEE, ktory jest już w kernelu.
( w ostatniej wersji to niby poprawili, ale u mnie nie zadzialało, może dlatego, ze mam ten moduł wbudowany statycznie w jajo, może powód byl inny).

Więc, jeśli zmienię numerek w ebuildzie starszej wersji, to nie jest zanda sensowna robota, jak napiszę ebuilda na 3 linijki, w stylu configure..; nmake; make install, to sie zupelnie nie nadaje na Bugzillę (za duzy poziom lamerstwa), a za slabo znam składnie ebuildów, żeby to zrobić tak, jak chciałbym, aby dzialało, postępując równocześnie zgodnie z zasadami Developerów Gentoo.

W dodatku już raz próbowalem poprawić ebuilda do xtables - i niestety wnie udalo mi się to, dlatego zaciagnąłem i skompilowalem z palca.

Ale może kiedyś zacznę?

PS:
Już jest wersja 1.45 xtables-addons, coś błyskawicznie po 1.43 pokazały się 2 wersje, pewnie poprawiali jakieś błędy.
Aktualizacja chyba wskazana...

Pozdrawiam
8)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum