View previous topic :: View next topic |
Author |
Message |
eshlox n00b
Joined: 11 Mar 2010 Posts: 13
|
Posted: Fri May 11, 2012 3:56 pm Post subject: Intel I7, dell, wentylator. |
|
|
Witam.
Ktoś może posiada i7? Della? Coś podobnego? Problem taki, że cały czas wentylator chodzi jakby procesor był obciążony w dużym stopniu Próbowałem już wyszukać jakieś sensory od tego w kernelu zaznaczając już nawet wszystkie jako moduły.. lm-sensors pokazuje tylko temperaturę. Cpufrequtils ustawione na --governor ondemand. Jakieś pomysły odnośnie ustawień kernela? modułów? Poratujcie pomysłami bo już dziś mam dość zagłuszania szumu muzyką
Code: |
eshlox ~ # sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +64.0°C (crit = +100.0°C)
temp2: +64.0°C (crit = +100.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +63.0°C (high = +86.0°C, crit = +100.0°C)
Core 0: +60.0°C (high = +86.0°C, crit = +100.0°C)
Core 1: +62.0°C (high = +86.0°C, crit = +100.0°C)
Core 2: +57.0°C (high = +86.0°C, crit = +100.0°C)
Core 3: +58.0°C (high = +86.0°C, crit = +100.0°C)
|
Code: |
eshlox ~ # sensors-detect
# sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
# System: Dell Inc. Dell System Inspiron N7110 (laptop)
# Board: Dell Inc. 09G8VY
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0x8518
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH)
Next adapter: i915 gmbus disabled (i2c-0)
Do you want to scan it? (YES/no/selectively): yes
y
Next adapter: i915 gmbus ssc (i2c-1)
Do you want to scan it? (YES/no/selectively):yes
Next adapter: i915 GPIOB (i2c-2)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus vga (i2c-3)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 GPIOA (i2c-4)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus panel (i2c-5)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: i915 GPIOC (i2c-6)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: i915 gmbus dpc (i2c-7)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 GPIOD (i2c-8)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus dpb (i2c-9)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 GPIOE (i2c-10)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus reserved (i2c-11)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus dpd (i2c-12)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 GPIOF (i2c-13)
Do you want to scan it? (YES/no/selectively): yes
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/conf.d/lm_sensors? Enter s to specify other file name?
(yes/NO/s): yes
Done.
You should now start the lm_sensors service to load the required
kernel modules.
|
Pozdrawiam. |
|
Back to top |
|
|
SlashBeast Retired Dev
Joined: 23 May 2006 Posts: 2922
|
Posted: Sat May 12, 2012 11:09 am Post subject: |
|
|
Ja na vostro 3500 uzywam 'dellfand'. Masz go w overlayu 'foo-overlay', po instalacji zedytuj /etc/conf.d/dellfand. |
|
Back to top |
|
|
eshlox n00b
Joined: 11 Mar 2010 Posts: 13
|
Posted: Sat May 12, 2012 1:47 pm Post subject: |
|
|
SlashBeast wrote: | Ja na vostro 3500 uzywam 'dellfand'. Masz go w overlayu 'foo-overlay', po instalacji zedytuj /etc/conf.d/dellfand. |
U mnie na Inspiron N7110 niezależnie od ustawień system przestaje odpowiadać ;-S |
|
Back to top |
|
|
magnum_pl Tux's lil' helper
Joined: 03 Aug 2006 Posts: 81 Location: Polska
|
Posted: Fri May 18, 2012 7:09 pm Post subject: |
|
|
Aktualnie nie mam już della ale kiedyś było coś takiego jak i8k do sterowania wentylatorami. _________________ Thinkpad x230 |
|
Back to top |
|
|
SlashBeast Retired Dev
Joined: 23 May 2006 Posts: 2922
|
Posted: Fri May 25, 2012 11:13 pm Post subject: |
|
|
Troche odkopuje ale sprawdz czy cos sie zmieni jak dodasz do parametrow kernela
Code: | acpi_osi=Linux acpi_backlight=vendor |
U mnie zarowno na Dellu Vostro po tym zaczela dzialac kontrola podswietlania bez uzywania modulu nvidiabl (+ Option "RegistryDwords" "EnableBrightnessControl=1" do configa xorga), wiatrak wydaje sie zachowywac okey nawet bez dellfand (ale to musze dluzej potestowac) jaki i na eeepc po tym dziala SuperHybridEngine. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|