[gelöst] Jetzt will vdr gar nicht mehr.

[Klaus Meier]

Irgendwie macht mich das Teil noch wahnsinnig, aber ich finde es einfach genial, kann nicht mehr ohne.

Aber jetzt lässt es sich gar nicht mehr starten. Es gibt:

/etc/init.d/vdr start
vdr | * Preparing start of vdr:
vdr | * Waiting for DVB devices ... [ ok ]
vdr | * Checking config files ... [ ok ]
vdr | * Starting vdr ... [ ok ]
vdr | * Waiting for working vdr ...
vdr | * VDR process died, please check logfile [ !! ]
vdr |/usr/bin/vdr: Kein Prozess gefunden
vdr | * ERROR: vdr failed to start

messages gibt folgendes:

May 2 21:17:59 airwolf vdr: [2900] VDR version 1.6.0-2 started
May 2 21:17:59 airwolf vdr: [2900] switched to user 'vdr'
May 2 21:17:59 airwolf vdr: [2900] running as daemon (tid=2900)
May 2 21:17:59 airwolf vdr: [2900] codeset is 'UTF-8' - known
May 2 21:17:59 airwolf vdr: [2900] found 1 locales in /usr/share/locale
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'slv,slo'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'ita'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'dut,nla,nld'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'por'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'fra,fre'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'nor'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'fin,suo'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'pol'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'esl,spa'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'ell,gre'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'sve,swe'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'rom,rum'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'hun'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'cat,cln'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'rus'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'hrv'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'est'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'dan'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'cze,ces'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'tur'
May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'ukr'
May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-osdteletext.so.1.6.0
May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-reelchannelscan.so.1.6.0
May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-remote.so.1.6.0
May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-xineliboutput.so.1.6.0
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/sources.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/diseqc.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/channels.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/commands.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/reccmds.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/svdrphosts.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/remote.conf
May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/keymacros.conf
May 2 21:17:59 airwolf /etc/init.d/vdr[2816]: ERROR: vdr failed to start

dmesg ist auch sauber

[ 5.099180] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 5.099366] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 23, latency: 64, mmio: 0xfebff800
[ 5.099383] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 5.099437] saa7133[0]: board init: gpio is 6400000
[ 5.240106] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 5.240112] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 5.240116] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[ 5.240121] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.240125] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[ 5.240129] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240133] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240137] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240141] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 a5 ff 0d f0 73 05 29 00
[ 5.240146] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[ 5.240150] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 5.240154] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 8d 00 00 00 00 00 00 00 00 00
[ 5.240158] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240162] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240166] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240171] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.240197] tveeprom 6-0050: Hauppauge model 67019, rev B4B4, serial# 917413
[ 5.240199] tveeprom 6-0050: MAC address is 00:0d:fe:0d:ff:a5
[ 5.240201] tveeprom 6-0050: tuner model is Philips 8275A (idx 114, type 4)
[ 5.240203] tveeprom 6-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 5.240206] tveeprom 6-0050: audio processor is SAA7131 (idx 41)
[ 5.240207] tveeprom 6-0050: decoder processor is SAA7131 (idx 35)
[ 5.240209] tveeprom 6-0050: has radio, has IR receiver, has IR transmitter
[ 5.240211] saa7133[0]: hauppauge eeprom: model=67019
[ 5.511539] i2c-core: driver [tuner] using legacy suspend method
[ 5.511547] i2c-core: driver [tuner] using legacy resume method
[ 5.562669] tuner 6-004b: Tuner -1 found with type(s) Radio TV.
[ 5.601029] tda829x 6-004b: setting tuner address to 61
[ 5.730152] tda829x 6-004b: type set to tda8290+75a
[ 8.730139] IR keymap rc-hauppauge not found
[ 8.730148] Registered IR keymap rc-empty
[ 8.730294] input: i2c IR (HVR 1110) as /devices/virtual/rc/rc0/input14
[ 8.730401] rc0: i2c IR (HVR 1110) as /devices/virtual/rc/rc0
[ 8.730407] ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-6/6-0071/ir0 [saa7133[0]]
[ 8.764262] saa7133[0]: registered device video0 [v4l2]
[ 8.764360] saa7133[0]: registered device vbi0
[ 8.764427] saa7133[0]: registered device radio0
[ 8.795430] dvb_init() allocating 1 frontend
[ 8.832142] DVB: registering new adapter (saa7133[0])
[ 8.832152] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 8.884162] tda1004x: setting up plls for 48MHz sampling clock
[ 9.065149] tda1004x: found firmware revision 20 -- ok

Hat jemand eine Idee? Und eins noch, mit Kaffeine geht alles prima.

[chithanh]

Falls neulich fontconfig auf 2.9.0 aktualisiert wurde (qlop -lu fontconfig), versuch mal ein downgrade auf 2.8.0-r2.

[Klaus Meier]

Das wars... oh mein Gott, was ist das denn? Wer soll denn auf so was kommen? Danke!

[chithanh]

Das kam wenn man vdr mit fontconfig-2.9.0 direkt von der shell gestartet hat: