View previous topic :: View next topic |
Author |
Message |
ibasaw Tux's lil' helper
Joined: 27 Aug 2006 Posts: 130 Location: France
|
Posted: Tue Apr 17, 2012 3:42 pm Post subject: [NGINX] restart ? (résolu) |
|
|
Salut,
J'ai mis a jour nginx et maintenant il me dit:
Code: |
# /etc/init.d/nginx restart
* ERROR: nginx does not have a start function.
nginx -V
nginx version: nginx/1.0.14
TLS SNI support enabled
configure arguments: --prefix=/usr --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error_log --pid-path=/var/run/nginx.pid --lock-path=/var/lock/nginx.lock --user=nginx --group=nginx --with-cc-opt=-I/usr/include --with-ld-opt=-L/usr/lib --http-log-path=/var/log/nginx/access_log --http-client-body-temp-path=/var/tmp/nginx/client --http-proxy-temp-path=/var/tmp/nginx/proxy --http-fastcgi-temp-path=/var/tmp/nginx/fastcgi --http-scgi-temp-path=/var/tmp/nginx/scgi --http-uwsgi-temp-path=/var/tmp/nginx/uwsgi --with-ipv6 --with-pcre --without-http_autoindex_module --without-http_browser_module --without-http_charset_module --without-http_empty_gif_module --without-http_fastcgi_module --without-http_geo_module --without-http_limit_req_module --without-http_limit_zone_module --without-http_map_module --without-http_memcached_module --without-http_referer_module --without-http_scgi_module --without-http_ssi_module --without-http_split_clients_module --without-http_upstream_ip_hash_module --without-http_userid_module --without-http_uwsgi_module --with-http_stub_status_module --with-http_ssl_module --without-mail_imap_module --without-mail_pop3_module --without-mail_smtp_module
|
Impossible de le relancer...j'ose pas faire un kill -HUP "IDproccessmasternginx" de peur de ne pas le relancer....
Comment je fais pour le relancer ?
Merci
A++
Last edited by ibasaw on Thu Apr 19, 2012 11:53 am; edited 1 time in total |
|
Back to top |
|
|
El_Goretto Moderator
Joined: 29 May 2004 Posts: 3169 Location: Paris
|
Posted: Tue Apr 17, 2012 3:44 pm Post subject: |
|
|
Tu vérifies la tronche de ton script init? (genre là je viens de découvrir la fonction update... on en apprend tous les jours)
Tu fais un etc-update/dispatch-conf propre? _________________ -TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
Back to top |
|
|
ibasaw Tux's lil' helper
Joined: 27 Aug 2006 Posts: 130 Location: France
|
Posted: Tue Apr 17, 2012 3:54 pm Post subject: |
|
|
J'ai bien fais update avec etc-update: il a donc ecraser le fichier de conf init
voila le contenu de mon init
Code: |
#!/sbin/runscript
# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/www-servers/nginx/files/nginx.initd,v 1.1 2012/02/11 10:17:30 hollow Exp $
extra_commands="configtest"
extra_started_commands="upgrade reload"
description="Robust, small and high performance http and reverse proxy server"
description_configtest="Run nginx' internal config check."
description_upgrade="Upgrade the nginx binary without losing connections."
description_reload="Reload the nginx configuration without losing connections."
nginx_config="/etc/nginx/nginx.conf"
command="/usr/sbin/nginx"
command_args="-c ${nginx_config}"
pidfile="/var/run/nginx.pid"
depend() {
need net
use dns logger netmount
}
start_pre() {
if [ "${RC_CMD}" != "restart" ]; then
configtest || return 1
fi
}
stop_pre() {
if [ "${RC_CMD}" = "restart" ]; then
configtest || return 1
fi
}
stop_post() {
rm -f ${pidfile}
}
reload() {
configtest || return 1
ebegin "Refreshing nginx' configuration"
kill -HUP `cat ${pidfile}` &>/dev/null
eend $? "Failed to reload nginx"
}
upgrade() {
configtest || return 1
ebegin "Upgrading nginx"
einfo "Sending USR2 to old binary"
kill -USR2 `cat ${pidfile}` &>/dev/null
einfo "Sleeping 3 seconds before pid-files checking"
sleep 3
if [ ! -f ${pidfile}.oldbin ]; then
eerror "File with old pid not found"
return 1
fi
if [ ! -f ${pidfile} ]; then
eerror "New binary failed to start"
return 1
fi
einfo "Sleeping 3 seconds before WINCH"
sleep 3 ; kill -WINCH `cat ${pidfile}.oldbin`
einfo "Sending QUIT to old binary"
kill -QUIT `cat ${pidfile}.oldbin`
einfo "Upgrade completed"
eend $? "Upgrade failed"
}
configtest() {
ebegin "Checking nginx' configuration"
${command} -c ${nginx_config} -t -q
if [ $? -ne 0 ]; then
${command} -c ${nginx_config} -t
fi
eend $? "failed, please correct errors above"
}
|
pourquoi j'ai pas de start, restart, ... ??? |
|
Back to top |
|
|
guilc Bodhisattva
Joined: 15 Nov 2003 Posts: 3326 Location: Paris - France
|
Posted: Tue Apr 17, 2012 4:54 pm Post subject: |
|
|
Tu n'as pas ces commandes car ce sont les fonctions "standard".
Elles sont conditionnées par les variables :
Code: | command="/usr/sbin/nginx"
command_args="-c ${nginx_config}"
pidfile="/var/run/nginx.pid" |
A tout hasard, quelle est ta version d'openrc ? C'est elle qui doit prendre en charge ces fonctions par défaut, dans le fichier /lib/rc/sh/runscript.sh.
C'est un fonctionnement assez nouveau, il n'existe pas dans les openrc trop vieux...
[Edit] complément d'info
[Edit2] Bon en fait non, c'est assez vieux comme fonctionnement, ça date de 2008-2009... C'est juste que c'est pas souvent utilisé par les scripts d'init... _________________ Merci de respecter les règles du forum.
Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing |
|
Back to top |
|
|
ibasaw Tux's lil' helper
Joined: 27 Aug 2006 Posts: 130 Location: France
|
Posted: Wed Apr 18, 2012 7:57 am Post subject: |
|
|
J'ai pas encore fait la migration, cela doit être a cause de ça...j'ai un vieux openrc |
|
Back to top |
|
|
ibasaw Tux's lil' helper
Joined: 27 Aug 2006 Posts: 130 Location: France
|
Posted: Wed Apr 18, 2012 1:24 pm Post subject: |
|
|
Je vais essayer de mettre a jour, je vous tiens au courant... |
|
Back to top |
|
|
guilc Bodhisattva
Joined: 15 Nov 2003 Posts: 3326 Location: Paris - France
|
Posted: Wed Apr 18, 2012 3:47 pm Post subject: |
|
|
ZuckBin wrote: | J'ai pas encore fait la migration, cela doit être a cause de ça...j'ai un vieux openrc |
Hein ??? Tu es encore en baselayout 1 ???
Alors oui, ne cherche pas plus loin, ça vient de là. baselayout 1 a été supprimé de portage il y a plus de 6 mois quand même ! (déput septembre 2011)
Et baselayout 2 a été stabilisé il y a... 1 an _________________ Merci de respecter les règles du forum.
Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing |
|
Back to top |
|
|
ibasaw Tux's lil' helper
Joined: 27 Aug 2006 Posts: 130 Location: France
|
Posted: Thu Apr 19, 2012 11:54 am Post subject: |
|
|
après la maj de Gentoo, c'est tout bon.....merci |
|
Back to top |
|
|
|