Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
System freezing (3.2.12) [not solved but improving]
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Mon Mar 12, 2012 10:31 pm    Post subject: System freezing (3.2.12) [not solved but improving] Reply with quote

Hello,

Since I've upgraded to 3.2.1, I'm experimenting several system hangs :
  • no keyboard
  • no mouse
  • network dead
  • it seems not background task running
  • if I'm playing a video, the sound loop.


As the system is totally dead, no message is added in the log. The only solution I have is too reboot (hopefully, this machine has a reset switch).

Code:
chose laurent # cat /proc/cpuinfo
processor   : 0
vendor_id   : AuthenticAMD
cpu family   : 6
model      : 4
model name   : AMD Athlon(tm) Processor
stepping   : 2
cpu MHz      : 1102.600
cache size   : 256 KB
fdiv_bug   : no
hlt_bug      : no
f00f_bug   : no
coma_bug   : no
fpu      : yes
fpu_exception   : yes
cpuid level   : 1
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips   : 2205.20
clflush size   : 32
cache_alignment   : 32
address sizes   : 36 bits physical, 32 bits virtual
power management:

chose laurent # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
00:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 02)
00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
00:0b.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 02)
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 82)


And my kernel config is :
Code:
chose proc # zcat config.gz | grep '='
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
CONFIG_DEFAULT_HOSTNAME="chose"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_TINY_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_NAMESPACES=y
CONFIG_RELAY=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_NO_BOOTMEM=y
CONFIG_MK7=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_VM86=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_HIGHMEM4G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_SECCOMP=y
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_X86_PM_TIMER=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
CONFIG_PCIE_PME=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_LRO=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_DNS_RESOLVER=y
CONFIG_FIB_RULES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PNP=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_HAVE_IDE=y
CONFIG_SCSI_MOD=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_PATA_VIA=y
CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_MII=y
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_GAMEPORT=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_PRINTER=m
CONFIG_PPDEV=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_NVRAM=y
CONFIG_HPET=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_PARPORT=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_HWMON=y
CONFIG_SENSORS_VIA686A=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_MFD_CORE=y
CONFIG_LPC_SCH=y
CONFIG_AGP=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_MGA=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VESA=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_VIA82XX=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
CONFIG_USB_HID=y
CONFIG_USB_HIDDEV=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_EDAC=y
CONFIG_EDAC_DECODE_MCE=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_HW=y
CONFIG_HAVE_KVM=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y


The system runs from an SCSI disk attached to the Adaptec controler.
I've checked the memory and didn't found any error.

Any tips to stabilize my system ?

Thanks

Laurent


Last edited by destroyedlolo on Thu Nov 15, 2012 4:54 pm; edited 7 times in total
Back to top
View user's profile Send private message
Dont Panic
Guru
Guru


Joined: 20 Jun 2007
Posts: 320
Location: SouthEast U.S.A.

PostPosted: Mon Mar 12, 2012 11:06 pm    Post subject: Reply with quote

Do you do much customization to your kernel configuration?

If your previous kernels are working fine, but your newest kernel is giving you trouble, you may want to drop back try a more generic, default kernel configuration to see if the problem goes away.
Back to top
View user's profile Send private message
WvR
Tux's lil' helper
Tux's lil' helper


Joined: 03 Mar 2011
Posts: 139
Location: Tsuruga, Japan

PostPosted: Tue Mar 13, 2012 5:29 am    Post subject: Reply with quote

Are you using a RealTek wireless card by any chance? Since the kernel went 3.x I have been experiencing random freezes whenever I boot into my "wireless enabled" kernel. It is something that is on my to-do-list (and yes, I know about the firmware issues etc but since I mainly use a wired network connection I don't really care).
Back to top
View user's profile Send private message
Kaso_da_Zmok
Apprentice
Apprentice


Joined: 19 Aug 2004
Posts: 188
Location: Cork, Ireland

PostPosted: Tue Mar 13, 2012 6:53 am    Post subject: Reply with quote

i suspect HW issues, by the lspci the box looks like at least 10+ years old. The motherboards/cpus tend to die in 5 to 6 years depending on conditions.
did you downgrade the kernel to prove it is only the software causing it?

i had one freeze recently with kernel 3.3.0 minutes after i plugged in realtec wifi on usb , but i did not have any wifi in kernel at the time.
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Tue Mar 13, 2012 9:40 am    Post subject: Reply with quote

Kaso_da_Zmok wrote:
i suspect HW issues, by the lspci the box looks like at least 10+ years old. The motherboards/cpus tend to die in 5 to 6 years depending on conditions.


It is : this machine was sleeping for 6/7 years in a cabinet and was used only once or twice before I started to use it (2 years back).

Kaso_da_Zmok wrote:
did you downgrade the kernel to prove it is only the software causing it?


It's on way, but it will take several days for me to qualify ...
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Thu Mar 15, 2012 10:04 am    Post subject: Reply with quote

Hello,

I returned back to 3.1.10 and didn't suffer for any instability.

I think the problem is linked with heavy network activity : each time it crashed, I was playing a video from a remote drive thru GVFS, or this machine was participating to a Distcc compilation.

Obviously, I need several additional days to confirm that 3.1.10 is stable ...

Bye

Laurent
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Sat Mar 17, 2012 3:27 pm    Post subject: Reply with quote

Well, after some days, I can confirm my machine is solid as rock with 3.1.10 and hangs on 3.2.1

Now, as it's a full hanging, I don't see how I can debug that :?
I hope the problem will be solved within future versions ...
Back to top
View user's profile Send private message
s_bernstein
Apprentice
Apprentice


Joined: 11 Mar 2006
Posts: 172
Location: Bremen, Germany

PostPosted: Sun Mar 18, 2012 6:22 am    Post subject: Reply with quote

Hmm... interesting. I'm also on 3.2.1-r2 and experiencing hang too. Especially during compilation under heavy load and memory usage. I'm using tmpfs for /var/tmp, so compiling big packages uses up a lot of memory. Never was an issue, but since kernel 3.x I've got all kinds of strange problems. Kernel versions 3.0.9 up to 3.0.21 (I didn't try all of them) where completely unreliable. So maybe, there is some wip on some drivers my system needs, that are problematic atm.
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Sun Mar 18, 2012 9:56 am    Post subject: Reply with quote

My /tmp is on tmpfs as well but /var/tmp is still on disk.

All my hangings were with high CPU load (VLC video playing, compilation, ...) but everything something related to network activities.
Frankly speaking, I don't know if it's due to load, network activities, memory stress, ...
Back to top
View user's profile Send private message
psheldon
n00b
n00b


Joined: 02 Apr 2006
Posts: 53
Location: South Africa

PostPosted: Wed Mar 21, 2012 10:03 pm    Post subject: Reply with quote

I also had a freeze with 3.2.1, I then had a bright Idea! Reinstall x11-drivers/xf86-input-evdev. and all is well again.
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Thu Mar 22, 2012 9:12 am    Post subject: Reply with quote

psheldon wrote:
I also had a freeze with 3.2.1, I then had a bright Idea! Reinstall x11-drivers/xf86-input-evdev. and all is well again.

On which circumstances ?
Back to top
View user's profile Send private message
psheldon
n00b
n00b


Joined: 02 Apr 2006
Posts: 53
Location: South Africa

PostPosted: Thu Mar 22, 2012 2:37 pm    Post subject: Reply with quote

On boot. KDM login screen no keyboard or mouse
Back to top
View user's profile Send private message
Kaso_da_Zmok
Apprentice
Apprentice


Joined: 19 Aug 2004
Posts: 188
Location: Cork, Ireland

PostPosted: Fri Mar 23, 2012 7:41 am    Post subject: Reply with quote

Quote:
On boot. KDM login screen no keyboard or mouse

that's different to what the guys here are after. Your "hang" is related to xorg-server update that might require you to recompile the xorg-input drivers to match it.

onto the topic. i can remember weird temporary hangs on kernel 3.2.1 lasting like 10 seconds spiking the load.
it went away after i switched to git-sources 3.3.0
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Fri Mar 23, 2012 9:02 am    Post subject: Reply with quote

Kaso_da_Zmok wrote:
onto the topic. i can remember weird temporary hangs on kernel 3.2.1 lasting like 10 seconds spiking the load.
it went away after i switched to git-sources 3.3.0

I'll do a try when a new kernel will be available, and will communicate the result.
Back to top
View user's profile Send private message
psheldon
n00b
n00b


Joined: 02 Apr 2006
Posts: 53
Location: South Africa

PostPosted: Fri Mar 23, 2012 3:31 pm    Post subject: Reply with quote

I am sorry I spoke I won't do it again.
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Tue May 01, 2012 4:57 pm    Post subject: Reply with quote

3.2.12 is out ... compiling.

Di someone suffering of hanging seen improvement or is it the same ?
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Tue May 01, 2012 7:47 pm    Post subject: Reply with quote

Well ...

Installed ... doesn't survived more than 10 minutes during emerge :cry:
Back to top
View user's profile Send private message
Dont Panic
Guru
Guru


Joined: 20 Jun 2007
Posts: 320
Location: SouthEast U.S.A.

PostPosted: Tue May 01, 2012 7:59 pm    Post subject: Reply with quote

I'm starting to agree with Kaso_da_Zmok. This may be hardware related.

I'd recommend running memtest. It would be a good idea to eliminate memory problems from the list anyways.

It could also be something else like the power supply or dust build-up on the CPU cooling fan. Have you looked inside, and blown any accumulated dust out?
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Wed May 02, 2012 8:43 am    Post subject: Reply with quote

Hi,

I already did some memory tests and they didn't detected anything bad.

And this machine is solid as a rock with 3.1.10 ... in fact, problem starting with 3.2

Seems really liked with strong CPU and/or network usage ...

Bye
Back to top
View user's profile Send private message
psheldon
n00b
n00b


Joined: 02 Apr 2006
Posts: 53
Location: South Africa

PostPosted: Wed May 02, 2012 3:25 pm    Post subject: Reply with quote

Oh found this .............
kernel /boot/kernel-3.2.12-gentoo pcie_aspm=force root=/dev/sda3

when searching all over with duckduckgo
The pcie_aspm=force in grub for the intel i7 southbridge causes it to work just fine and without it it don't.
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Sun May 06, 2012 7:30 am    Post subject: Reply with quote

psheldon wrote:

kernel /boot/kernel-3.2.12-gentoo pcie_aspm=force root=/dev/sda3


The system survived as a participant of Firefox Distcc build and while a video was playing.
No problem after 6h of intensive work as well so I think you find it :D

Thanks
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Sat May 12, 2012 10:26 am    Post subject: Reply with quote

Well, NOT SOLVED.

It crashed today during PHP compilation :(
Back to top
View user's profile Send private message
Dont Panic
Guru
Guru


Joined: 20 Jun 2007
Posts: 320
Location: SouthEast U.S.A.

PostPosted: Sat May 12, 2012 4:04 pm    Post subject: Reply with quote

If you think the pcie_aspm=force boot keyword is helping, then maybe you should recompile your kernel without PCIE. There is no way a 1.1 GHz AMD Athlon machine could have PCIE.

Another suggestion would be to switch to the 3.0 kernel. The 3.0 kernel is still being maintained, but the 3.1 kernel has reached End-of-life (EOL).

Although, since it seems to take days for this error to surface, it is possible that your 3.1 kernel would eventually have hit this error also, but you just didn't run it long enough.
Back to top
View user's profile Send private message
destroyedlolo
Guru
Guru


Joined: 17 Jun 2011
Posts: 413
Location: Close to Annecy

PostPosted: Sat May 12, 2012 9:53 pm    Post subject: Reply with quote

HUM, which option trigger PCIE ?

Anyway, I'll give another chance to 3.2.12 as it's its first crash for days ... and this time, the system hangs during compilation but also when the screen blanker was active.
Long time back, I already had this kind of issue with the screen blanker ... perhaps it is back ...

As I'm doing strong video editing with Cinelerra, it's a good test about CPU load :)

Let see ...
Back to top
View user's profile Send private message
Dont Panic
Guru
Guru


Joined: 20 Jun 2007
Posts: 320
Location: SouthEast U.S.A.

PostPosted: Sat May 12, 2012 9:59 pm    Post subject: Reply with quote

destroyedlolo wrote:
HUM, which option trigger PCIE ?

From 'make menuconfig'
Code:
Bus options (PCI etc.)  --->
     [ ]   PCI Express support
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum