Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Driver for Feiya cardreader [Solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4745
Location: Saint Amant, Acadiana

PostPosted: Sun Feb 17, 2013 10:24 pm    Post subject: Driver for Feiya cardreader [Solved] Reply with quote

I have a PC case with USB cardreader 090c:1000. Can't figure out what to turn on in the kernel to make it work. USB sticks mount no problem, this reader does not show up in lsusb. But it shows up with SysResqueCD, lsmod does not show anything interesting, they must have it built in. :?
_________________
Please learn how to denote units correctly!


Last edited by Jaglover on Mon Feb 18, 2013 12:02 am; edited 1 time in total
Back to top
View user's profile Send private message
Gusar
Advocate
Advocate


Joined: 09 Apr 2005
Posts: 2643
Location: Slovenia

PostPosted: Sun Feb 17, 2013 10:34 pm    Post subject: Reply with quote

Are you sure 090c:1000 is the reader? A quick google shows me it's an usb stick. Post the full lsusb and "lspci -nn" output.
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4745
Location: Saint Amant, Acadiana

PostPosted: Sun Feb 17, 2013 10:48 pm    Post subject: Reply with quote

Thanks for reply.
Code:
lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a000] (rev 02)
        Subsystem: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a000]
        Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a001] (rev 02)
        Subsystem: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a001]
        Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a002] (rev 02)
        Subsystem: Intel Corporation Device [8086:a001]
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
        Subsystem: Intel Corporation DeskTop Board D945GTP [8086:27d8]
        Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8]
        Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9]
        Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca]
        Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb]
        Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
        Subsystem: Allied Telesis, Inc (Wrong ID) Device [0010:27cc]
        Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
        Subsystem: Intel Corporation NM10 Family LPC Controller [8086:27bc]
        Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 02)
        Subsystem: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0]
        Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
        Subsystem: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da]
        Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
        Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168]
        Kernel driver in use: r8168

From Gentoo:

Code:
lsusb
Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 005 Device 002: ID 045e:00b0 Microsoft Corp. Digital Media Pro Keyboard
Bus 005 Device 003: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

From SysRescueCD I see additionally 090c:1000, it's an SD reader, there is no card in it.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Gusar
Advocate
Advocate


Joined: 09 Apr 2005
Posts: 2643
Location: Slovenia

PostPosted: Sun Feb 17, 2013 11:10 pm    Post subject: Reply with quote

I can only repeat: What makes you so sure it's the reader? Because Google says "090c:1000 Feiya Technology Corp. Flash Drive" is an usb stick, not a card-reader.

There's no reader in the output you posted. So idk, maybe it activates only when a card gets inserted. In SystemRescueCD: insert a SD card, run dmesg, use pastebin to post it's output.
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4745
Location: Saint Amant, Acadiana

PostPosted: Sun Feb 17, 2013 11:31 pm    Post subject: Reply with quote

Alright, it's getting weird now.
From SysRescue, no card inserted.
Code:
Bus 001 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 005 Device 002: ID 045e:00b0 Microsoft Corp. Digital Media Pro Keyboard
Bus 005 Device 003: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
...

From SysRescue, after card was inserted.
Code:
Bus 001 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 006: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 005 Device 002: ID 045e:00b0 Microsoft Corp. Digital Media Pro Keyboard
Bus 005 Device 003: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
...

Forgot to pastebin dmesg while there ... :oops:
But got tail from messages.
Code:
Feb 17 23:20:00 sysresccd kernel: [  221.504048] usb 1-6: new high-speed USB device number 6 using ehci_hcd
Feb 17 23:20:00 sysresccd kernel: [  221.619352] usb 1-6: New USB device found, idVendor=058f, idProduct=6366
Feb 17 23:20:00 sysresccd kernel: [  221.619361] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 17 23:20:00 sysresccd kernel: [  221.619369] usb 1-6: Product: Flash Card Reader/Writer
Feb 17 23:20:00 sysresccd kernel: [  221.619374] usb 1-6: Manufacturer: Generic
Feb 17 23:20:00 sysresccd kernel: [  221.619379] usb 1-6: SerialNumber: 058F63666438
Feb 17 23:20:00 sysresccd kernel: [  221.620881] scsi3 : usb-storage 1-6:1.0
Feb 17 23:20:01 sysresccd kernel: [  222.624897] scsi 3:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
Feb 17 23:20:01 sysresccd kernel: [  222.627070] sd 3:0:0:0: Attached scsi generic sg3 type 0
Feb 17 23:20:02 sysresccd kernel: [  223.160137] sd 3:0:0:0: [sdd] 977920 512-byte logical blocks: (500 MB/477 MiB)
Feb 17 23:20:02 sysresccd kernel: [  223.160999] sd 3:0:0:0: [sdd] Write Protect is off
Feb 17 23:20:02 sysresccd kernel: [  223.161062] sd 3:0:0:0: [sdd] Mode Sense: 03 00 00 00
Feb 17 23:20:02 sysresccd kernel: [  223.161869] sd 3:0:0:0: [sdd] No Caching mode page present
Feb 17 23:20:02 sysresccd kernel: [  223.161878] sd 3:0:0:0: [sdd] Assuming drive cache: write through
Feb 17 23:20:02 sysresccd kernel: [  223.165614] sd 3:0:0:0: [sdd] No Caching mode page present
Feb 17 23:20:02 sysresccd kernel: [  223.165623] sd 3:0:0:0: [sdd] Assuming drive cache: write through
Feb 17 23:20:02 sysresccd kernel: [  223.167190]  sdd: sdd1
Feb 17 23:20:02 sysresccd kernel: [  223.170513] sd 3:0:0:0: [sdd] No Caching mode page present
Feb 17 23:20:02 sysresccd kernel: [  223.170524] sd 3:0:0:0: [sdd] Assuming drive cache: write through
Feb 17 23:20:02 sysresccd kernel: [  223.170536] sd 3:0:0:0: [sdd] Attached SCSI removable disk


Hmmm ... looks like I need 058f:6366 Alcor Micro Corp. Multi Flash Reader ... but I still think it's weird the empty reader shows up as flashdrive. :roll:
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Gusar
Advocate
Advocate


Joined: 09 Apr 2005
Posts: 2643
Location: Slovenia

PostPosted: Sun Feb 17, 2013 11:56 pm    Post subject: Reply with quote

Jaglover wrote:
but I still think it's weird the empty reader shows up as flashdrive. :roll:

Does it? How do you start SystemRescueCD - from an actual CD, or from an usb stick?

Anyway, I was right, the reader powers up only when a card is inserted. To get it running, I think activating "USB ENE card reader support" (CONFIG_USB_STORAGE_ENE_UB6250) will do it.
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4745
Location: Saint Amant, Acadiana

PostPosted: Mon Feb 18, 2013 12:02 am    Post subject: Reply with quote

Of course! :mrgreen:

I must have had a brainfart. (Can it be Heineken is to blame?) Yes you were right, it activates when the card is inserted. Darn 090c:1000 is the USB stick with sysrescue. Thanks alot!
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum