Xywa
Veteran
Joined: 23 Jul 2005
Posts: 1631
Location: /mnt/Gentoo/Europe
|
 Posted: Wed May 18, 2011 9:36 am Post subject: Samsung Galaxy S i Gentoo |
 |
|
Witam,
Czy ktoś może opisać jak skorzystać z Samsunga Galaxy S pod Gentoo (KDE)? Czy są potrzebne jakieś bibloteki (jak do iPhona)?
Wyczytałem w Linux Magazine że np. Banshee czy Amarok radzą sobie bez problemu z iPodem czy z Samasung Galaxy S.
Próbuje podłączyć Samsunga Galaxy S, ale jakoś bez rezultatów. Teoretycznie system go zauważa. Macie jakieś sugestie?
lsusb
| Code: | Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 001 Device 012: ID 04e8:6877 Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 192f:0716 Avago Technologies, Pte. |
dmesg
| Code: | [ 662.027989] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[ 662.028002] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
[ 662.028026] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
[ 662.028030] usb 1-1: USB disconnect, address 10
[ 662.028032] usb 1-1: unregistering device
[ 662.028035] usb 1-1: unregistering interface 1-1:4.0
[ 662.028102] usb 1-1: unregistering interface 1-1:4.1
[ 662.028148] usb 1-1: unregistering interface 1-1:4.2
[ 662.028206] usb 1-1: usb_disable_device nuking all URBs
[ 662.132105] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
[ 664.028100] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[ 664.028111] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 664.028119] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
[ 664.054029] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
[ 664.158024] hub 1-0:1.0: debounce: port 1: total 125ms stable 100ms status 0x100
[ 664.158029] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[ 665.610827] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[ 665.610839] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 665.610847] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
[ 665.714030] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
[ 665.765264] ehci_hcd 0000:00:04.1: port 1 high speed
[ 665.765272] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 665.816036] usb 1-1: new high speed USB device using ehci_hcd and address 11
[ 665.867273] ehci_hcd 0000:00:04.1: port 1 high speed
[ 665.867280] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 665.930988] usb 1-1: skipped 4 descriptors after interface
[ 665.931114] usb 1-1: default language 0x0409
[ 665.931480] usb 1-1: udev 11, busnum 1, minor = 10
[ 665.931482] usb 1-1: New USB device found, idVendor=04e8, idProduct=6877
[ 665.931485] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 665.931488] usb 1-1: Product: SAMSUNG_Android
[ 665.931490] usb 1-1: Manufacturer: SAMSUNG
[ 665.931493] usb 1-1: SerialNumber: 1000de22b82c
[ 665.931598] usb 1-1: usb_probe_device
[ 665.931603] usb 1-1: configuration #4 chosen from 1 choice
[ 665.931854] usb 1-1: adding 1-1:4.0 (config #4, interface 0)
[ 665.932024] usb 1-1: adding 1-1:4.1 (config #4, interface 1)
[ 665.932142] usb 1-1: adding 1-1:4.2 (config #4, interface 2)
[ 665.932276] drivers/usb/core/inode.c: creating file '011'
|
Last edited by Xywa on Mon May 30, 2011 6:24 am; edited 1 time in total |
|
Polskie forum (Polish) 
