Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] Xorg -configure failed: No devices to configure.
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
NightHawk-tp
n00b
n00b


Joined: 14 Apr 2011
Posts: 5
Location: Brno, Czech Republic

PostPosted: Thu Apr 14, 2011 4:01 pm    Post subject: [Solved] Xorg -configure failed: No devices to configure. Reply with quote

hi,
since it's some time I've configured X server, i was going with official nVidia and X server Guide
and i have some problem configuring X

Code:
hostname ~ # Xorg -configure
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/Cripplys-NTB:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 x86_64 Gentoo
Current Operating System: Linux Cripplys-NTB 2.6.37-gentoo-r4 #7 SMP Thu Apr 14 16:49:06 CEST 2011 x86_64
Kernel command line: root=/dev/sda2 video=uvesafb:mtrr,ywrap,1024x768-32@50
Build Date: 13 April 2011  11:43:39PM

Current version of pixman: 0.20.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 14 17:26:53 2011
List of video drivers:
        nvidia
FATAL: Error inserting nvidia (/lib/modules/2.6.37-gentoo-r4/video/nvidia.ko): No such device
(EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
(EE) NVIDIA:     system's kernel log for additional error messages.
(EE) Failed to load module "nvidia" (module-specific error, 0)
No devices to configure.  Configuration failed.


Code:
hostname ~ # modprobe nvidia
FATAL: Error inserting nvidia (/lib/modules/2.6.37-gentoo-r4/video/nvidia.ko): No such device


Code:
hostname ~ # lspci -v
...
03:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce G102M] (rev b1) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device 19b4
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at f8000000 (64-bit, prefetchable) [size=32M]
        I/O ports at dc00 [size=128]
        Expansion ROM at fafe0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Kernel driver in use: nouveau
        Kernel modules: nvidia
...


any ideas?

---
thanks


Last edited by NightHawk-tp on Thu Apr 14, 2011 4:43 pm; edited 1 time in total
Back to top
View user's profile Send private message
ONEEYEMAN
Advocate
Advocate


Joined: 01 Mar 2005
Posts: 2110

PostPosted: Thu Apr 14, 2011 4:42 pm    Post subject: Reply with quote

Hi,
If you just run "startx" I am guessing it will fail as well?

Thank you.
Back to top
View user's profile Send private message
NightHawk-tp
n00b
n00b


Joined: 14 Apr 2011
Posts: 5
Location: Brno, Czech Republic

PostPosted: Thu Apr 14, 2011 4:45 pm    Post subject: Reply with quote

i've just realized it's caused by conflict with in-kernel nouveau driver, which was built-in into kernel
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum