| View previous topic :: View next topic |
| Author |
Message |
wellwong
n00b
Joined: 22 Mar 2011
Posts: 6
|
 Posted: Thu Mar 31, 2011 8:56 am Post subject: Ati驱动问题，真有想死的心了！求帮助 |
 |
|
有台HP nx6330的笔记本，配置如下：
CPU：Intel T2300 1.66GHz
内存：2G
显卡：01:00.0 VGA compatible controller: ATI Technologies Inc M52 [Mobility Radeon X1300]
目的：gnome+compiz
问题：
1. 使用fglrx驱动的话，无法modprobe fglrx
| Quote: | gentoo ~ # modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.36-gentoo-r8/video/fglrx.ko): No such device |
modprobe -l是有的
| Quote: | gentoo ~ # modprobe -l
/lib/modules/2.6.36-gentoo-r8/kernel/drivers/video/backlight/generic_bl.ko
/lib/modules/2.6.36-gentoo-r8/kernel/drivers/scsi/scsi_wait_scan.ko
/lib/modules/2.6.36-gentoo-r8/kernel/drivers/gpu/drm/radeon/radeon.ko
/lib/modules/2.6.36-gentoo-r8/kernel/drivers/gpu/drm/drm_kms_helper.ko
/lib/modules/2.6.36-gentoo-r8/kernel/drivers/gpu/drm/ttm/ttm.ko
/lib/modules/2.6.36-gentoo-r8/video/fglrx.ko
|
aticonfig也报错
| Quote: | gentoo ~ # aticonfig
aticonfig: No supported adapters detected
|
内核：
| Quote: | --- Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) │ │
│ │ < > 3dfx Banshee/Voodoo3+ │ │
│ │ < > ATI Rage 128 │ │
│ │ <M> ATI Radeon │ │
│ │ [ ] Enable modesetting on radeon by default - NEW DRIVER │ │
│ │ < > Matrox g200/g400 │ │
│ │ < > Via unichrome video cards │ │
│ │ < > Savage video cards │ │
│ │ |
| Quote: | --- Support for frame buffer devices │ │
│ │ [ ] Enable firmware EDID │ │
│ │ [ ] Framebuffer foreign endianness support ---> │ │
│ │ -*- Enable Video Mode Handling Helpers │ │
│ │ [ ] Enable Tile Blitting Support │ │
│ │ *** Frame buffer hardware drivers *** │ │
│ │ < > Cirrus Logic support │ │
│ │ < > Permedia2 support │ │
│ │ < > CyberPro 2000/2010/5000 support │ │
│ │ < > Arc Monochrome LCD board support │ │
│ │ [ ] Asiliant (Chips) 69000 display support │ │
│ │ [ ] IMS Twin Turbo display support │ │
│ │ < > VGA 16-color graphics support │ │
│ │ <*> Userspace VESA VGA graphics support │ │
│ │ [ ] VESA VGA graphics support │ │
│ │ < > N411 Apollo/Hecuba devkit support │ │
│ │ < > Hercules mono graphics support │ │
│ │ < > Epson S1D13XXX framebuffer support │ │
│ │ < > nVidia Framebuffer Support │ │
│ │ < > nVidia Riva support │ │
│ │ < > Intel LE80578 (Vermilion) support │ │
│ │ < > Matrox acceleration │ │
│ │ <*> ATI Radeon display support │ │
│ │ [*] DDC/I2C for ATI Radeon support │ │
│ │ [*] Support for backlight control │ │
│ │ [ ] Lots of debug output from Radeon driver │ │
│ │ < > ATI Rage128 display support │ │ |
是不是现在闭源驱动放弃x1300了？还是我内核有地方选的不对？到底应该怎么安装呢？
2.如果用开源驱动radeon的话，可以进xorg和gnome，但是compiz无法启动.......
compiz start会提示
| Quote: | Screen 0 on display ":0.0" already has a window manager; try using the --replace option to replace the current window manager.
|
compiz --replace 会没有窗口，而且没有任何3D效果，请告诉我是不是xorg.conf有什么特别的设置针对radeon开源驱动......因为依然无法使用aticonfig。。。。。。请高手帮助！ |
|
| Back to top |
|
 |
LonelyCoyote
n00b
Joined: 26 May 2010
Posts: 17
|
|
| Back to top |
|
|
|
中文 (Chinese)
