wpa_supplicant Intel 4965 need a hand (Solved)

[plice]

Hi,

I"m trying to run wpa_supplicant. It will not associate with the wifi, which is wpa2-psk.

I think the driver is bit buggy as well, as i have to kick it out of modules for the wpa_suppicant to start working w/out errors.

My config files:
lspci:
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)

kernel:

CONFIG_IWLWIFI=m
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
# CONFIG_IWL5000 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set

iwlist scan is working fine. Found sourrounding wifi, including mine.

Cell 01 - Address: 94:44:52:2D:99:89
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=70/70 Signal level=-35 dBm
Encryption key:on
ESSID:"HALLO"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000233409ae6f
Extra: Last beacon: 3348ms ago
IE: Unknown: 000548414C4C4F
IE: Unknown: 010882848B961224486C
IE: Unknown: 03010B
IE: Unknown: 2A0104
IE: Unknown: 32048C98B060
IE: Unknown: 2D1A0E1017FFFF0000010000000000000000000000000C0000000000
IE: Unknown: 3D160B070000000000000000000000000000000000000000
IE: Unknown: 3E0100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
IE: Unknown: 7F0101
IE: Unknown: DD07000C4307000000
IE: Unknown: 0706474220010D10
IE: Unknown: DD1E00904C330E1017FFFF0000010000000000000000000000000C0000000000
IE: Unknown: DD1A00904C340B070000000000000000000000000000000000000000


wpa_supplicant.conf:

ctrl_interface=/var/run/wpa_supplicant
eapol_version=2
ctrl_interface_group=wheel

network={
ssid="hallo"
scan_ssid=1
proto=RSN
pairwise=CCMP TKIP
key_mgmt=WPA-PSK
psk=encrypted

# psk="ascii"
}



/etc/conf.d/net:

modules=( "wpa_supplicant" )

wpa_supplicant_wlan0=( "-Dnl80211" )


/etc/init.d/ has net.wlan0

Pls advise, i'm not sure what's wrong. Compiled KDE and supplicant_gui will not show adaptors as well


thank you!

[Voltago]

[plice]

Hi,

Manged to get connected to the wpa2 router.

I still got some issues:

1) on startup of the wpa i get errors like:

SICSIFFLAGS: unknown error 132
and dmesg says wlan0: link is not ready, i assume it's only because the wlan0 is not ready fast enough while wpa starts up ?

oh yeh, i've changed the driver as you have advised. works nice

thanks

Polish

[idella4]

have a look at https://bugs.launchpad.net/ubuntu/+source/linux, may help
_________________
idella4@aus