Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Erro: Xorg instalado, mas, não executa
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Portuguese
View previous topic :: View next topic  
Author Message
rpm-linux
n00b
n00b


Joined: 11 Jun 2010
Posts: 1

PostPosted: Fri Jun 11, 2010 5:00 pm    Post subject: Erro: Xorg instalado, mas, não executa Reply with quote

Olá pessoal, agradeço a quem estiver lendo este tópico. Bem, sou novo por aqui, uso linux a 3 anos, os 2 últimos passei com o Ubuntu (ainda o uso, versão 10.04), porém, quero aprender mais sobre linux e resolvi instalar Archlinux (instalei ele, coloquei o Xorg e depois o lxde, tudo funcionando, só preciso instalar o gdm ou xdm, mas startx abre o lxde, sim eu coloquei "startlxde exec no .*init*).

Instalei o Gentoo, e para mim foi difícil, demorei uns 7 dias para conseguir. Quando vi a tela preta com letras brancas pedindo o login, eu me alegrei muito, é sério (rsrsrs).

Bem, a internet não funcionou, recompilei o kernel e agora funciona (é, tive que aprender a compilar o kernel, quase não entendi muita coisa do menuconfig, mas fiz).

Instalei o Xorg, fiz "Xorg -configure", porém retornar um erro e manda ver o "log". Agradeço quem puder me ajudar, meu e-mail (robisonpmachado@gmail.com).

A minha intenção é mudar de distro e depois de pesquisar sobre alguns resolvi ficar com Gentoo, como distro principal, Archlinux, secundária e Ubuntu, como terceira devido aos leigos como eu (estou saindo deste patamar, eu acho).

Antes que me esqueça, comecei a fazer um curso EaD de TI recentemente (2 meses atrás), Sistemas de Informação, porém até agora só tive Cálculo Integral, Metodologia Científica e Introdução à Computação.

Segue abaixo o log e mais algumas informações do meu pc:


#################################################
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-22-generic x86_64
Current Operating System: Linux gentoo 2.6.32-gentoo-r7 #1 SMP Fri Jun 11 18:22:14 BRT 2010 x86_64
Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/sda8 udev
Build Date: 09 June 2010 10:12:58PM

Current version of pixman: 0.17.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 11 21:23:43 2010
(II) Loader magic: 0x7a7560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2772:103c:2a60 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xffa80000/524288, 0xd0000000/268435456, 0xffa40000/262144, I/O @ 0x0000ec00/8
List of video drivers:
trident
radeon
nv
glint
vmwlegacy
r128
savage
ati
openchrome
intel
mga
mach64
vmware
tdfx
sis
neomagic
fbdev
vesa
(II) LoadModule: "trident"
(II) Loading /usr/lib64/xorg/modules/drivers/trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.3.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.12.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "nv"
(II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.1.17
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "glint"
(II) Loading /usr/lib64/xorg/modules/drivers/glint_drv.so
(II) Module glint: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vmwlegacy"
(II) Loading /usr/lib64/xorg/modules/drivers/vmwlegacy_drv.so
(II) Module vmwlegacy: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 11.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "r128"
(II) Loading /usr/lib64/xorg/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "savage"
(II) Loading /usr/lib64/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "ati"
(II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.12.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "openchrome"
(II) Loading /usr/lib64/xorg/modules/drivers/openchrome_drv.so
(II) Module openchrome: vendor="http://openchrome.org/"
compiled for 1.7.6, module version = 0.2.904
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "intel"
(II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mga"
(II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.4.11
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mach64"
(II) Loading /usr/lib64/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.8.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vmware"
(II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so
(II) Module vmware: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 11.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(--) vmware: X configured to use vmwgfx X driver assume who ever did that knows what they are doing
(--) vmware: Please ignore above "[drm] failed to load kernel module "vmwgfx""
(II) vmware: Using vmwlegacy driver everything is fine.

Backtrace:
0: Xorg (xorg_backtrace+0x28) [0x455bc0]
1: Xorg (0x400000+0x54925) [0x454925]
2: /lib/libpthread.so.0 (0x7f8f8f3eb000+0xedf0) [0x7f8f8f3f9df0]
3: /usr/lib64/xorg/modules/drivers/vmware_drv.so (0x7f8f8afc6000+0xa93) [0x7f8f8afc6a93]
4: Xorg (0x400000+0xeb49a) [0x4eb49a]
5: Xorg (0x400000+0xeb9e4) [0x4eb9e4]
6: Xorg (xf86LoadModules+0xb3) [0x4682e2]
7: Xorg (DoConfigure+0x60) [0x46f68a]
8: Xorg (InitOutput+0xa0b) [0x46a5dc]
9: Xorg (0x400000+0x242fa) [0x4242fa]
10: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7f8f8d2e7a26]
11: Xorg (0x400000+0x24049) [0x424049]
Segmentation fault at address (nil)

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
#################################################


CHROOT - KUBUNTU / # uname -a
Linux ubuntu-desktop 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 Intel(R) Celeron(R) D CPU 3.06GHz GenuineIntel GNU/Linux

#################################################

CHROOT - KUBUNTU / # lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)

##########################################################################
Back to top
View user's profile Send private message
njsg
n00b
n00b


Joined: 17 Dec 2005
Posts: 55
Location: Finland

PostPosted: Sat Jun 19, 2010 9:11 pm    Post subject: Re: Erro: Xorg instalado, mas, não executa Reply with quote

rpm-linux wrote:
Bem, a internet não funcionou, recompilei o kernel e agora funciona (é, tive que aprender a compilar o kernel, quase não entendi muita coisa do menuconfig, mas fiz).


Eu tenho azar com as placas de rede. Já várias vezes calhou ter uma que ou não funciona com o live-CD que tenho, ou não funciona mesmo sem firmware, ou que o driver não está no kernel.

rpm-linux wrote:
Instalei o Xorg, fiz "Xorg -configure", porém retornar um erro e manda ver o "log". Agradeço quem puder me ajudar, meu e-mail (robisonpmachadoe@gmail.com).


Vou responder aqui. Mas já agora, se preferires, há uma lista de correio para utilizadores que falam português.

Gentoo wrote:

gentoo-user-br Brazilian Gentoo User Mailing List


Para saberes como funciona, podes ver a página das listas de correio do Gentoo (em inglês). Para subscrever é só mandar um mail para
Code:
gentoo-user-br+subscribe@lists.gentoo.org
.

rpm-linux wrote:

(--) PCI:*(0:0:2:0) 8086:2772:103c:2a60 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xffa80000/524288, 0xd0000000/268435456, 0xffa40000/262144, I/O @ 0x0000ec00/8
List of video drivers:
trident
radeon
nv
glint
vmwlegacy
r128
savage
ati
openchrome
intel
mga
mach64
vmware
tdfx
sis
neomagic
fbdev
vesa


Isto é uma lista grande de drivers. Para simplificar as coisas, podes definir, no
Code:
make.conf
a variável

Code:
VIDEO_CARDS="vesa intel"


que define as placas gráficas a usar. Neste exemplo, meti
Code:
vesa
(um driver genérico, deve funcionar com todas as placas), e
Code:
intel
(se a tua placa é da Intel, acho que este é o driver certo).

Isto não altera em nada a capacidade do X de funcionar, mas é capaz de ajudar o -configure a funcionar.

rpm-linux wrote:

(--) vmware: X configured to use vmwgfx X driver assume who ever did that knows what they are doing
(--) vmware: Please ignore above "[drm] failed to load kernel module "vmwgfx""
(II) vmware: Using vmwlegacy driver everything is fine.


Backtrace:
0: Xorg (xorg_backtrace+0x28) [0x455bc0]
1: Xorg (0x400000+0x54925) [0x454925]
2: /lib/libpthread.so.0 (0x7f8f8f3eb000+0xedf0) [0x7f8f8f3f9df0]
3: /usr/lib64/xorg/modules/drivers/vmware_drv.so (0x7f8f8afc6000+0xa93) [0x7f8f8afc6a93]
4: Xorg (0x400000+0xeb49a) [0x4eb49a]
5: Xorg (0x400000+0xeb9e4) [0x4eb9e4]
6: Xorg (xf86LoadModules+0xb3) [0x4682e2]
7: Xorg (DoConfigure+0x60) [0x46f68a]
8: Xorg (InitOutput+0xa0b) [0x46a5dc]
9: Xorg (0x400000+0x242fa) [0x4242fa]
10: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7f8f8d2e7a26]
11: Xorg (0x400000+0x24049) [0x424049]
Segmentation fault at address (nil)

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting



Ele está a carregar os drivers todos (o que é normal, quando a ideia é detectar qual o certo). Mas por alguma razão o
Code:
vmware
está a funcionar mal.

Não sei o que se passa com este driver, mas se ele não for carregado és capaz de conseguir abrir o -configure. Uma forma de fazer isso é definir a tal variável no make.conf. Também podes remover o driver, com

Code:
emerge -aC x11-drivers/xf86-video-vmware


Que assim podes experimentar a seguir o
Code:
Xorg -configure
e se não resolver o problema, basta actualizares o sistema para ele voltar a instalar o pacote, com

Code:
emerge -aDu world


Espero ter ajudado!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portuguese All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum