View previous topic :: View next topic |
Author |
Message |
manaru n00b
Joined: 07 Jan 2008 Posts: 26
|
Posted: Fri Jun 11, 2010 3:52 pm Post subject: [solved] kvm native ipv6 |
|
|
Hi,
i am unable to configure native ipv6 on a kvm guest. Does someone have a suggestion or more info?
Should i post ipv4 addr and route too because it must be a routed setup?
host:
/etc/conf.d/net
Code: | config_eth0=( "192.168.98.66/27" "coff:eeba:be61:1261:1261::2/59" )
routes_eth0=( "default via 192.168.98.65" "default via coff:eeba:be61:1260::1")
brctl_br0=( "setfd 0" "sethello 0" "stp off" )
config_br0=( "192.168.212.241/29" "coff:eeba:be61:1261:ff::1/59" )
config_qtap242=( "null" )
tuntap_qtap242="tap"
tunctl_qtap242="-u root"
routes_qtap242=("192.168.212.242/32 dev br0" "coff:eeba:be61:1261:ff::242/128 dev br0") |
# ip -6 a
Code: | 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 coff:eeba:be:1261::2/59 scope global
valid_lft forever preferred_lft forever
inet6 fe80::21d:92ff:fe63:3fe6/64 scope link
valid_lft forever preferred_lft forever
4: qtap242: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 500
inet6 fe80::e036:94ff:fee0:8772/64 scope link
valid_lft forever preferred_lft forever
5: qtap246: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 500
inet6 fe80::e022:feff:fef4:cd5d/64 scope link
valid_lft forever preferred_lft forever
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
inet6 coff:eeba:be:1261:ff::1/59 scope global
valid_lft forever preferred_lft forever
inet6 fe80::a02c:f7ff:fe4a:f566/64 scope link
valid_lft forever preferred_lft forever |
# ip -6 r
Code: | coff:eeba:be:1261:ff::242 dev qtap242 metric 1000 mtu 1500 advmss 1440 hoplimit 4294967295
coff:eeba:be:1260::/59 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
coff:eeba:be:1260::/59 dev br0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
fe80::/64 dev qtap242 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
fe80::/64 dev br0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
ff00::/8 dev eth0 metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
ff00::/8 dev qtap242 metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
ff00::/8 dev qtap246 metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
ff00::/8 dev br0 metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
default via coff:eeba:be:1260::1 dev eth0 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295
|
guest:
/etc/conf.d/net
Code: | config_eth0=( "192.168.212.242/29" "coff:eeba:be61:1261:ff::242/96" )
routes_eth0=( "default via 192.168.212.241" ) |
# ip -6 a
Code: | 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 coff:eeba:be:1261:ff::242/96 scope global
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link
valid_lft forever preferred_lft forever |
# ip -6 r
Code: | coff:eeba:be:1261:ff::/96 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
ff00::/8 dev eth0 metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 |
Last edited by manaru on Fri Jun 18, 2010 9:41 pm; edited 2 times in total |
|
Back to top |
|
|
Hu Moderator
Joined: 06 Mar 2007 Posts: 21602
|
Posted: Sat Jun 12, 2010 2:41 am Post subject: |
|
|
Do you have ipv4 working in the guest? From the configuration you pasted, I would be a bit surprised if you have a working network at all. You create a bridge device, give it an address, but do not put any devices in it. What devices are you trying to bridge together? |
|
Back to top |
|
|
manaru n00b
Joined: 07 Jan 2008 Posts: 26
|
Posted: Mon Jun 14, 2010 12:42 am Post subject: |
|
|
hi,
subnet is routed directly to main ip, Because of a MAC filter i need a own gateway (88.198.212.241/29 on br0).
with
#bridge_br0="eth0 qtap242 qtap246"
server is unrachable via ipv6. thats why a want routed config on ipv6 too.
# ip -4 a
Code: | 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
inet 192.168.98.66/27 brd 192.168.98.95 scope global eth0
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
inet 192.168.212.241/29 brd 192.168.212.247 scope global br0
# ip -4 r
192.168.212.246 dev qtap246 scope link metric 1000
192.168.212.242 dev qtap242 scope link metric 1000
192.168.212.240/29 dev br0 proto kernel scope link src 192.168.212.241
192.168.98.64/27 dev eth0 proto kernel scope link src 192.168.98.66
127.0.0.0/8 dev lo scope link
default via 192.168.98.65 dev eth0 |
# ip -4 a
Code: | 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
inet 192.168.212.242/29 brd 192.168.212.247 scope global eth0
# ip -4 r
192.168.212.240/29 dev eth0 proto kernel scope link src 192.168.212.242
127.0.0.0/8 dev lo scope link
default via 192.168.212.241 dev eth0 |
|
|
Back to top |
|
|
manaru n00b
Joined: 07 Jan 2008 Posts: 26
|
Posted: Fri Jun 18, 2010 9:41 pm Post subject: |
|
|
Hi,
Now it works. here is
/etc/conf.d/net
Code: | depend_br0() {
need net.eth0 net.qtap242
}
config_eth0=( "null" )
bridge_br0="eth0 qtap242"
#rc_need_br0="net.qtap242"
brctl_br0=( "setfd 0" "sethello 0" "stp off" )
config_br0=( "192.168.98.66/27" "coff:eeba:be:1261::2/59" "192.168.212.241/29" "coff:eeba:be:1261:ff::1/120" )
routes_br0=( "default via 192.168.98.65" "default via coff:eeba:be:1260::1")
config_qtap242=( "null" )
tuntap_qtap242="tap"
tunctl_qtap242="-u root"
routes_qtap242=("192.168.212.242/29 dev br0" "coff:eeba:be:1261:ff::42/120 dev br0")
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|