| View previous topic :: View next topic |
| Author |
Message |
CoderMan
Apprentice
Joined: 10 Aug 2009
Posts: 173
|
 Posted: Sat May 22, 2010 9:53 am Post subject: sys-devel/gcc-4.3.4 failed |
 |
|
Hi. Today I started experience trouble with my 32-bit Gentoo running on my home router. It began when I got some evidence that my cron scheduled "emerge --sync" was not operating properly. I attempted to run emerge --sync manual, but each attempt would eventually die with an error like so:
error in rsync protocol data stream (code 12)
My subsequent Google research was inconclusive, but I suspected there might be a broken dependency. I was going to run revdep-rebuild, but I thought first I would run "emerge -vauND world" just to get everything up to date. About 20 or so packages needed to be rebuilt or updated.
Most of this went fine, but eventually it died with this:
| Code: | * ERROR: sys-devel/gcc-4.3.4 failed:
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 5031: Called toolchain_src_compile
* environment, line 5605: Called gcc_src_compile
* environment, line 3220: Called gcc_do_make
* environment, line 3010: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.3.4',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.3.4'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.3.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.3.4/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.3.4/work/build'
|
I thought I should step back and get some guidance before continuing. Here is the output mentioned by the above error message:
| Code: |
poirot ~ # emerge --info =sys-devel/gcc-4.3.4
Portage 2.1.8.3 (hardened/linux/x86/10.0, gcc-4.3.4, glibc-2.10.1-r1, 2.6.31-gentoo-r6 i686)
=================================================================
System Settings
=================================================================
System uname: Linux-2.6.31-gentoo-r6-i686-Pentium_III_-Katmai-with-gentoo-1.12.13
Timestamp of tree: Sat, 22 May 2010 06:45:01 +0000
app-shells/bash: 4.0_p37
dev-lang/python: 2.6.4-r1
sys-apps/baselayout: 1.12.13
sys-apps/sandbox: 1.6-r2
sys-devel/autoconf: 2.65
sys-devel/automake: 1.10.2, 1.11.1
sys-devel/binutils: 2.18-r3
sys-devel/gcc: 4.3.4
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=pentium3 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -march=pentium3 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="acl bash-completion berkdb bzip2 cli cracklib crypt cups cxx dri gdbm gpm hardened iconv modules mudflap ncurses nls nptl nptlonly openmp pam pcre perl pic pppd python readline reflection session spl ssl sysfs tcpd unicode urandom x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="apm ark chips cirrus cyrix dummy fbdev glint i128 i740 intel mach64 mga neomagic nsc nv r128 radeon rendition s3 s3virge savage siliconmotion sis sisusb tdfx tga trident tseng v4l vesa via vmware voodoo" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
=================================================================
Package Settings
=================================================================
sys-devel/gcc-4.3.4 was built with the following:
USE="fortran mudflap nls nptl openmp (-altivec) -bootstrap -build -doc (-fixed-point) -gcj -gtk -hardened (-libffi) (-multilib) -multislot (-n32) (-n64) -nocxx -nopie -objc -objc++ -objc-gc -test -vanilla"
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="-O2 -march=i686 -pipe"
|
| Code: |
poirot ~ # emerge -pqv =sys-devel/gcc-4.3.4
Performing Global Updates: /usr/portage/profiles/updates/2Q-2010
(Could take a couple of minutes if you have a lot of binary packages.)
.='update pass' *='binary update' #='/var/db update' @='/var/db move'
s='/var/db SLOT move' %='binary move' S='binary SLOT move'
p='update /etc/portage/package.*'
...............
[ebuild R ] sys-devel/gcc-4.3.4 USE="hardened* mudflap nls nptl openmp (-altivec) -bootstrap -build -doc (-fixed-point) -fortran* -gcj -gtk (-libffi) (-multilib) -multislot (-n32) (-n64) -nocxx -nopie -objc -objc++ -objc-gc -test -vanilla"
|
The last page of the build log:
| Code: |
/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/./prev-gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -c -O2 -march=pentium3 -pipe -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../libdecnumber/bid -I../libdecnumber -o build/genattr.o /var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/genattr.c
/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/./prev-gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -O2 -march=pentium3 -pipe -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -o build/genattr \
build/genattr.o build/rtl.o build/read-rtl.o build/ggc-none.o build/vec.o build/min-insn-modes.o build/gensupport.o build/print-rtl.o build/errors.o .././libiberty/libiberty.a
build/genattr /var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/config/i386/i386.md \
insn-conditions.md > tmp-attr.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../move-if-change tmp-attr.h insn-attr.h
echo timestamp > s-attr
/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/./prev-gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -c -O2 -march=pentium3 -pipe -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.3.4/work/gcc-4.3.4/gcc/../libdecnumber/bid -I../libdecnumber insn-attrtab.c -o insn-attrtab.o
{standard input}: Assembler messages:
{standard input}:32174: Warning: partial line at end of file ignored
xgcc: Internal error: Killed (program cc1)
Please submit a full bug report.
See <http://bugs.gentoo.org/> for instructions.
make[3]: *** [insn-attrtab.o] Error 1
make[3]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.3.4/work/build/gcc'
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.3.4/work/build'
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.3.4/work/build'
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.3.4 failed:
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 5031: Called toolchain_src_compile
* environment, line 5605: Called gcc_src_compile
* environment, line 3220: Called gcc_do_make
* environment, line 3010: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.3.4',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.3.4'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.3.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.3.4/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.3.4/work/build'
|
The ebuild environment file is too large to include.
_________________
Like computers but don't like programming? Then you missed the whole point.
frigidcode.com |
|
| Back to top |
|
 |
ikshaar
Veteran
Joined: 23 Jul 2002
Posts: 1339
Location: Baltimore, MD
|
| Posted: Tue May 25, 2010 6:57 pm Post subject: |
|
|
It looks like you added "hardened" in your USE flag, or it comes from you not having a rsync done in while. not sure. Which profile are you running ? did it need update may be ?
Also I think you can do a manual rsync by downloading the portage tree.
_________________
"May God stands between you and harm in all the empty places where you must walk" - Babylon 5 |
|
| Back to top |
|
|
krinn
Watchman
Joined: 02 May 2003
Posts: 7470
|
| Posted: Wed May 26, 2010 12:30 am Post subject: |
|
|
| remove -fomit-frame-pointer and retry. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
