Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
fglrx = no go
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Thu Apr 08, 2010 11:33 am    Post subject: fglrx = no go Reply with quote

Hello,
I am trying to get fglrx working and i keep failing. I have tried testing branch and used xorg-server 1.7.6 with new 10.4 beta ati-drivers and kernel 2.6.33 and no luck, I just get blank screen and my system hangs. Now i have installed latest stable gentoo. Xorg-server 1.6.5, ati-drivers 9.11 and latest stable vanilla sources 2.6.31.12 and still no luck. The strange thing is that aticonfig --query-monitor shows no monitors detected or connected, maybe I am missing something ?
Code:
localhost ~ # aticonfig --query-monitor
Default Adapter - ATI Radeon HD 3850
  Connected monitors: none
  Enabled monitors: none

Xorg.0.log is very short too
Code:

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31.12-NX1 i686
Current Operating System: Linux localhost 2.6.31.12-NX1 #5 SMP Thu Apr 8 10:40:18 Local time zone must be set--see zic m i686
Build Date: 08 April 2010  10:54:31AM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr  8 10:59:45 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
   Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
   /usr/share/fonts/misc/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3aa0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:2:0:0) 1002:9505:1462:1120 ATI Technologies Inc RV670PRO [Radeon HD 3850] rev 0, Mem @ 0xe0000000/268435456, 0xfdbe0000/65536, I/O @ 0x00009c00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [18] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [19] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [20] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [21] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [22] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [23] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
   compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 7.4.0, module version = 1.0.0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
   compiled for 1.4.99.906, module version = 8.67.4
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
   compiled for 1.4.99.906, module version = 8.67.4
   Module class: X.Org Video Driver
(II) ATI Proprietary Linux Driver Version Identifier:8.67.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.671                               
(II) ATI Proprietary Linux Driver Build Date: Nov  4 2009 09:43:39
(II) Primary Device is: PCI 02@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9505) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [18] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [19] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [20] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [21] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [22] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [23] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x946fcd8
(II) resource ranges after probing:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [17] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [18] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [19] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [20] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [21] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [22] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [23] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [24] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [25] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [26] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [27] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [28] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 0.1.0
   ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
drmDynamicMajor: found major device number 252
drmDynamicMajor: found major device number 252
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:2:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 3850" (Chipset = 0x9505)
(--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1120)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xfdbe0000
(--) fglrx(0): I/O port at 0x00009c00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.1.0
   ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.81
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV670
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 2:0.0.

lscpi output
Code:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: ATI Technologies Inc RV670PRO [Radeon HD 3850]
02:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
03:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)

ANd here goes xorg.conf
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "vesa"
#BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Thu Apr 08, 2010 11:50 am    Post subject: Reply with quote

Quote:
I just get blank screen and my system hangs.

This is what you get when Xorg starts successfully, but no input device is configured and no WM is loaded.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Thu Apr 08, 2010 11:58 am    Post subject: Reply with quote

Jaglover wrote:
Quote:
I just get blank screen and my system hangs.

This is what you get when Xorg starts successfully, but no input device is configured and no WM is loaded.

I have twm, xterm installed. If i set driver to vesa and run startx i get twm + xterm. If i set driver fglrx system just hangs.
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Thu Apr 08, 2010 12:01 pm    Post subject: Reply with quote

Did you try without xorg.conf?
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Thu Apr 08, 2010 12:14 pm    Post subject: Reply with quote

You are using the vesa driver ????

Code:

Driver "vesa"


Did you try with this :

Code:

Driver "fglrx"


Also, can you post this :

Code:

# emerge --info
# rc-update show
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Thu Apr 08, 2010 1:21 pm    Post subject: Reply with quote

Yes i am now using vesa because fglrx causes system hang.
emerge --info
Code:

localhost ~ # emerge --info
Portage 2.1.7.17 (default/linux/x86/10.0, gcc-4.3.4, glibc-2.10.1-r1, 2.6.31.12-NX1 i686)
=================================================================
System uname: Linux-2.6.31.12-NX1-i686-AMD_Athlon-tm-_64_X2_Dual_Core_Processor_3800+-with-gentoo-1.12.13
Timestamp of tree: Wed, 07 Apr 2010 01:45:01 +0000
app-shells/bash:     4.0_p37
dev-lang/python:     2.6.4-r1
dev-util/cmake:      2.6.4-r3
sys-apps/baselayout: 1.12.13
sys-apps/sandbox:    1.6-r2
sys-devel/autoconf:  2.63-r1
sys-devel/automake:  1.11.1
sys-devel/binutils:  2.18-r3
sys-devel/gcc:       4.3.4
sys-devel/gcc-config: 1.4.1
sys-devel/libtool:   2.2.6b
virtual/os-headers:  2.6.30-r1
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="acl berkdb bzip2 cli cracklib crypt cups cxx dri fortran gdbm gpm iconv ipv6 modules mudflap ncurses nls nptl nptlonly openmp pam pcre perl pppd python readline reflection session spl ssl sysfs tcpd unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fglrx vesa"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
P.S. I compiled xorg with USE="hal" also i have used X use flag. I only added VIDEO_CARDS to make.conf thats all, I dont wanna recompile whole system with compiler or useflags until i get fglrx working. By the way i had old instatalion and open source driver worked fine, but still 3d performance sucks.
rc-update show
Code:

localhost ~ # rc-update show
            bootmisc | boot                         
             checkfs | boot                         
           checkroot | boot                         
               clock | boot                         
         consolefont | boot                         
            hostname | boot                         
             keymaps | boot                         
               local |      default nonetwork       
          localmount | boot                         
             modules | boot                         
            net.eth0 |      default                 
              net.lo | boot                         
            netmount |      default                 
           rmnologin | boot                         
           syslog-ng |      default                 
      udev-postmount |      default                 
             urandom | boot                         

Note i start hald and dbus manualy.
EDIT. I did startx with fglrx that caused hang but alt+sysrq+k helped and i could switch to terminal and saw
(WW) fglrx no matching Device section for instance (bus PCI:0@2:0:1) found.
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Thu Apr 08, 2010 3:34 pm    Post subject: Reply with quote

Can you do a quick test ?

Code:

# eselect profile set 2
# eselect profile list
# emerge -auDNv world
# rc-update add hald default
# rc-update add dbus default
# rc-update add consolekit default
# reboot


You need to have at least dbus and hal use flag to start.

I make you use the desktop profile to start on a good base.
Back to top
View user's profile Send private message
hedmo
Veteran
Veteran


Joined: 29 Aug 2009
Posts: 1305
Location: sweden

PostPosted: Thu Apr 08, 2010 5:44 pm    Post subject: Reply with quote

if you mix fglrx with another driver it can be problems

there is many thing that can make this

1.do have a package.mask (to prevent portage to install stuffs for xorg-1.7)

2.for me to startx(xorg-1.6.5) with fglrx i had to erase all other drivers.hit Xorg -configure without a xorg.conf
put the xorg.conf back and hit startx

i post my package.mask.set it in /etc/portage/ and hit:

emerge --newuse --update --deep --ask world

dont do any more just post the output (i belive you got a xorg-1.6.5 mix error with xorg-1.7)

this was my package.mask till i got ati-drivers-10.4

>=x11-base/xorg-drivers-1.7
>=x11-base/xorg-server-1.7.5
>=x11-libs/libX11-1.3.2
>=x11-libs/libXinerama-1.1
>=x11-proto/xextproto-7.1.1
>=x11-libs/libXext-1.1.1
>=x11-libs/libXi-1.3
>=x11-proto/xcmiscproto-1.2.0
>=x11-proto/xf86bigfontproto-1.2.0
>=x11-proto/bigreqsproto-1.1.0
>=x11-proto/xineramaproto-1.2
>=x11-proto/xextproto-7.1.1
>=x11-proto/fixesproto-4.1.1
>=x11-proto/inputproto-2.0
>=x11-libs/libXinerama-1.1
>=x11-proto/recordproto-1.14
>=x11-libs/libXtst-1.1.0
>=x11-proto/scrnsaverproto-1.2.0
>=x11-libs/libXScrnSaver-1.2.0
>=x11-proto/xf86vidmodeproto-2.3
>=x11-libs/libXxf86vm-1.1.0
>=x11-apps/xinput-1.5.0
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Thu Apr 08, 2010 7:06 pm    Post subject: Reply with quote

d2_racing wrote:
Can you do a quick test ?

Well that wasnt quick :) picking desktop profile just pulled in stuff like qt4. I did recompiled packages that were pulled in, also i even installed ati-drivers 10.3 and still same problem. Xorg.0.log shows same stuff. Hedmo thanks for trying to help but i reinstalled gentoo using stable branch and i dont have xorg-server-1.6.x and xorg-server 1.7x mix. Also funny thing is that i tried ubuntu 9.04 (i hate ubuntu) fglrx worked somehow. I also tried upgrading ubuntu to 9.10 and then fglrx fails and i get same old blank screen. Maybe its my chipsets fault?
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 6920

PostPosted: Thu Apr 08, 2010 8:50 pm    Post subject: Reply with quote

Code:
eselect opengl set ati

May or may not help, but sometimes it needs to be run manually.
Back to top
View user's profile Send private message
kernelOfTruth
Watchman
Watchman


Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)

PostPosted: Thu Apr 08, 2010 9:25 pm    Post subject: Reply with quote

Ant_P wrote:
Code:
eselect opengl set ati

May or may not help, but sometimes it needs to be run manually.


++

often in the past if you didn't set this before starting up X - the box would hardlock ;)

starting with the 10.X drivers (or at least 10.4_pre from Ubuntu 10.04) it doesn't hardlock anymore and only shows a black screen unable to switch back to VT*, in that case you can still reboot with Magic SysRQ Key and REISUB
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa

Hardcore Gentoo Linux user since 2004 :D
Back to top
View user's profile Send private message
hedmo
Veteran
Veteran


Joined: 29 Aug 2009
Posts: 1305
Location: sweden

PostPosted: Fri Apr 09, 2010 7:15 am    Post subject: Reply with quote

i dont understand what you mean with stable branch.you are using xorg right?
the latest stable xorg for fglrx is 1.6.5

post output of

emerge -vp xorg-server

to let us see what xorg you are playing with
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Fri Apr 09, 2010 9:01 am    Post subject: Reply with quote

I had opengl set ati already but thanks for trying to help. Hedmo stable means stable branch not testing and i have
Code:
 emerge -pv xorg-server

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] x11-base/xorg-server-1.6.5-r1  USE="hal ipv6 nptl sdl xorg -debug -dmx -kdrive -minimal -tslib" 0 kB
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 10:16 am    Post subject: Reply with quote

Hi there!
It seems I have exactly the same problem with a Radeon 5770 on the same Motherboard chipset it seems. I'm on an AMD64 system with xorg 1.6.5

Code:

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r10 x86_64
Current Operating System: Linux wthp094 2.6.33-gentoo #1 SMP Fri Apr 9 14:54:26 CEST 2010 x86_64
Build Date: 08 April 2010  03:35:21PM                                                           
                                                                                               
        Before reporting problems, check http://wiki.x.org                                     
        to make sure that you have the latest version.                                         
Markers: (--) probed, (**) from config file, (==) default setting,                             
        (++) from command line, (!!) notice, (II) informational,                               
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.                           
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 12 11:59:36 2010                           
(==) Using config file: "/etc/X11/xorg.conf"                                                   
(==) ServerLayout "aticonfig Layout"                                                           
(**) |-->Screen "Screen0" (0)                                                                   
(**) |   |-->Monitor "Monitor0"                                                                 
(**) |   |-->Device "Device0"                                                                   
(==) Automatically adding devices                                                               
(==) Automatically enabling devices                                                             
(==) FontPath set to:                                                                           
        /usr/share/fonts/misc/,                                                                 
        /usr/share/fonts/TTF/,                                                                 
        /usr/share/fonts/OTF,                                                                   
        /usr/share/fonts/Type1/,                                                               
        /usr/share/fonts/100dpi/,                                                               
        /usr/share/fonts/75dpi/                                                                 
(==) ModulePath set to "/usr/lib64/xorg/modules"                                               
(II) Cannot locate a core pointer device.                                                       
(II) Cannot locate a core keyboard device.                                                     
(II) The server relies on HAL to provide the list of input devices.                             
        If no devices become available, reconfigure HAL or disable AllowEmptyInput.             
(II) Loader magic: 0xd20                                                                       
(II) Module ABI versions:                                                                       
        X.Org ANSI C Emulation: 0.4                                                             
        X.Org Video Driver: 5.0                                                                 
        X.Org XInput driver : 4.0                                                               
        X.Org Server Extension : 2.0                                                           
(II) Loader running on linux                                                                   
(++) using VT number 7                                                                         

(--) PCI:*(0:3:0:0) 1002:68b8:1002:2543 ATI Technologies Inc rev 0, Mem @ 0xe0000000/268435456, 0xf0000000/131072, I/O @ 0x00009000/256, BIOS @ 0x????????/131072                                                                                                                 
(II) Open ACPI successful (/var/run/acpid.socket)                                                                                       
(II) System resource ranges:                                                                                                             
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [4] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [5] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [6] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [7] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [8] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [9] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [10] -1 0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [11] -1 0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [12] -1 0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [13] -1 0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [14] -1 0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [15] -1 0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [16] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [17] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [18] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [19] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [21] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [22] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [23] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.                                         
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.                                           
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.                                           
(II) "record" will be loaded by default.                                                                                                 
(II) "dri" will be loaded by default.                                                                                                   
(II) "dri2" will be loaded by default.                                                                                                   
(II) LoadModule: "glx"                                                                                                                   
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so                                                                               
(II) Module glx: vendor="FireGL - ATI Technologies Inc."                                                                                 
        compiled for 7.4.0, module version = 1.0.0                                                                                       
(II) Loading extension GLX                                                                                                               
(II) LoadModule: "dbe"                                                                                                                   
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so                                                                               
(II) Module dbe: vendor="X.Org Foundation"                                                                                               
        compiled for 1.6.5, module version = 1.0.0                                                                                       
        Module class: X.Org Server Extension                                                                                             
        ABI class: X.Org Server Extension, version 2.0                                                                                   
(II) Loading extension DOUBLE-BUFFER                                                                                                     
(II) LoadModule: "extmod"                                                                                                               
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so                                                                           
(II) Module extmod: vendor="X.Org Foundation"                                                                                           
        compiled for 1.6.5, module version = 1.0.0                                                                                       
        Module class: X.Org Server Extension                                                                                             
        ABI class: X.Org Server Extension, version 2.0                                                                                   
(II) Loading extension MIT-SCREEN-SAVER                                                                                                 
(II) Loading extension XFree86-VidModeExtension                                                                                         
(II) Loading extension XFree86-DGA                                                                                                       
(II) Loading extension DPMS                                                                                                             
(II) Loading extension XVideo                                                                                                           
(II) Loading extension XVideo-MotionCompensation                                                                                         
(II) Loading extension X-Resource                                                                                                       
(II) LoadModule: "type1"                                                                                                                 
(WW) Warning, couldn't open module type1                                                                                                 
(II) UnloadModule: "type1"                                                                                                               
(EE) Failed to load module "type1" (module does not exist, 0)                                                                           
(II) LoadModule: "freetype"                                                                                                             
(WW) Warning, couldn't open module freetype                                                                                             
(II) UnloadModule: "freetype"                                                                                                           
(EE) Failed to load module "freetype" (module does not exist, 0)                                                                         
(II) LoadModule: "record"                                                                                                               
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so                                                                           
(II) Module record: vendor="X.Org Foundation"                                                                                           
        compiled for 1.6.5, module version = 1.13.0                                                                                     
        Module class: X.Org Server Extension                                                                                             
        ABI class: X.Org Server Extension, version 2.0                                                                                   
(II) Loading extension RECORD                                                                                                           
(II) LoadModule: "dri"                                                                                                                   
(WW) Warning, couldn't open module dri                                                                                                   
(II) UnloadModule: "dri"                                                                                                                 
(EE) Failed to load module "dri" (module does not exist, 0)                                                                             
(II) LoadModule: "dri2"                                                                                                                 
(WW) Warning, couldn't open module dri2                                                                                                 
(II) UnloadModule: "dri2"                                                                                                               
(EE) Failed to load module "dri2" (module does not exist, 0)                                                                             
(II) LoadModule: "fglrx"                                                                                                                 
(II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so                                                                               
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."                                                                               
        compiled for 1.4.99.906, module version = 8.71.4                                                                                 
        Module class: X.Org Video Driver                                                                                                 
(II) Loading sub module "fglrxdrm"                                                                                                       
(II) LoadModule: "fglrxdrm"                                                                                                             
(II) Loading /usr/lib64/xorg/modules/linux//libfglrxdrm.so                                                                               
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."                                                                           
        compiled for 1.4.99.906, module version = 8.71.4                                                                                 
(II) ATI Proprietary Linux Driver Version Identifier:8.71.4                                                                             
(II) ATI Proprietary Linux Driver Release Identifier: 8.712                                                                             
(II) ATI Proprietary Linux Driver Build Date: Mar  2 2010 22:16:37                                                                       
(II) Primary Device is: PCI 03@00:00:0                                                                                                   
(WW) Falling back to old probe method for fglrx                                                                                         
(II) Loading PCS database from /etc/ati/amdpcsdb                                                                                         
(--) Assigning device section with no busID to primary device                                                                           
(--) Chipset Supported AMD Graphics Processor (0x68B8) found                                                                             
(WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found                                                           
(II) AMD Video driver is running on a device belonging to a group targeted for this release                                             
(II) AMD Video driver is signed                                                                                                         
(II) resource ranges after xf86ClaimFixedResources() call:                                                                               
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [4] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [5] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [6] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [7] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [8] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [9] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [10] -1 0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [11] -1 0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [12] -1 0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [13] -1 0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [14] -1 0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [15] -1 0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [16] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [17] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [18] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [19] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [21] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [22] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [23] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
(II) fglrx(0): pEnt->device->identifier=0x1a0cbc0                                                                                       
(II) resource ranges after probing:                                                                                                     
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [4] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [5] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [6] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [7] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [8] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [9] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [10] -1 0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [11] -1 0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [12] -1 0       0xffffffff - 0xffffffff (0x1) MX[B]                                                                             
        [13] -1 0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                                         
        [14] -1 0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                                         
        [15] -1 0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                                         
        [16] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B]                                                                         
        [17] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B]                                                                           
        [18] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B]                                                                           
        [19] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [20] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [21] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [22] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [23] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [24] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [25] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                                             
        [26] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]                                                                             
        [27] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]                                                                             
        [28] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]                                                                             
(II) fglrx(0): === [atiddxPreInit] === begin                                                                                             
(II) Loading sub module "vgahw"                                                                                                         
(II) LoadModule: "vgahw"                                                                                                                 
(II) Loading /usr/lib64/xorg/modules//libvgahw.so                                                                                       
(II) Module vgahw: vendor="X.Org Foundation"                                                                                             
        compiled for 1.6.5, module version = 0.1.0                                                                                       
        ABI class: X.Org Video Driver, version 5.0                                                                                       
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32                                                                                         
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)                                                                 
(==) fglrx(0): Default visual is TrueColor                                                                                               
(**) fglrx(0): Option "SWcursor" "true"                                                                                                 
(**) fglrx(0): Option "DPMS"                                                                                                             
(==) fglrx(0): RGB weight 888                                                                                                           
(II) fglrx(0): Using 8 bits per RGB                                                                                                     
(==) fglrx(0): Gamma Correction for I is 0x06419064                                                                                     
(==) fglrx(0): Gamma Correction for II is 0x06419064                                                                                     
(==) fglrx(0): Buffer Tiling is ON                                                                                                       
(II) Loading sub module "fglrxdrm"                                                                                                       
(II) LoadModule: "fglrxdrm"                                                                                                             
(II) Reloading /usr/lib64/xorg/modules/linux//libfglrxdrm.so                                                                             
ukiDynamicMajor: found major device number 250                                                                                           
ukiDynamicMajor: found major device number 250                                                                                           
ukiOpenByBusid: Searching for BusID PCI:3:0:0                                                                                           
ukiOpenDevice: node name is /dev/ati/card0                                                                                               
ukiOpenDevice: open result is 10, (OK)                                                                                                   
ukiOpenByBusid: ukiOpenMinor returns 10                                                                                                 
ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0                                                                                           
(--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8)                                                                   
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2543)                                                                           
(==) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xf0000000
(--) fglrx(0): I/O port at 0x00009000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib64/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.6.5, module version = 1.1.0
        ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: JUNIPER
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) fglrx(0): Using adapter: 3:0.0.


The Xserver starts and hangs with 100% CPU usage at this last line
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) fglrx(0): Using adapter: 3:0.0

The box is still accessible via ssh and the XServer is not killable by any kill command.
unloading the fglrx module by force nevertheless helps.

If I unload the module by force I get some output in my dmesg where it seems he was killed while trying to initialize the GPU.
My dmesg where i manually unloaded the module:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.33-gentoo (root@wthp094) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #1 SMP Fri Apr 9 14:54:26 CEST 2010
[ 0.000000] Command line: root=/dev/sda6
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff10000 (usable)
[ 0.000000] BIOS-e820: 000000007ff10000 - 000000007ff16000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff16000 - 000000007ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fe000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff10 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ff10000 (usable)
[ 0.000000] modified: 000000007ff10000 - 000000007ff16000 (ACPI data)
[ 0.000000] modified: 000000007ff16000 - 000000007ff80000 (ACPI NVS)
[ 0.000000] modified: 000000007ff80000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fc000000 - 00000000fe000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f7840] f7840
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff10000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff10000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff10000 @ 16000-1a000
[ 0.000000] ACPI: RSDP 00000000000f7810 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 000000007ff130d5 0003C (v01 PTLTD RSDT 00060000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007ff15c54 00074 (v01 FSC 00060000 000F4240)
[ 0.000000] ACPI: DSDT 000000007ff13111 02B43 (v01 FSC D246x 00060000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000007ff16fc0 00040
[ 0.000000] ACPI: SSDT 000000007ff15cc8 00248 (v01 PTLTD POWERNOW 00060000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000007ff15f10 00054 (v01 PTLTD ? APIC 00060000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000007ff15f64 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000007ff15fa0 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)
[ 0.000000] ACPI: BOOT 000000007ff15fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff10000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff10000
[ 0.000000] NODE_DATA [0000000000018000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 000000000002cfe7] pages 10
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 007ff10000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 000180c0d4] TEXT DATA BSS ==> [0001000000 - 000180c0d4]
[ 0.000000] #2 [000180d000 - 000180d1c0] BRK ==> [000180d000 - 000180d1c0]
[ 0.000000] #3 [00000f7850 - 0000100000] BIOS reserved ==> [00000f7850 - 0000100000]
[ 0.000000] #4 [00000f7840 - 00000f7850] MP-table mpf ==> [00000f7840 - 00000f7850]
[ 0.000000] #5 [000009e000 - 000009e471] BIOS reserved ==> [000009e000 - 000009e471]
[ 0.000000] #6 [000009e575 - 00000f7840] BIOS reserved ==> [000009e575 - 00000f7840]
[ 0.000000] #7 [000009e471 - 000009e575] MP-table mpc ==> [000009e471 - 000009e575]
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
[ 0.000000] #10 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ff10
[ 0.000000] On node 0 totalpages: 523934
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3820 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512843 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7c000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s78104 r8192 d24296 u1048576
[ 0.000000] pcpu-alloc: s78104 r8192 d24296 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516663
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 2058428k/2096192k available (4995k kernel code, 456k absent, 37308k reserved, 2169k data, 520k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2410.629 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.25 BogoMIPS (lpj=2410629)
[ 0.001112] Security Framework initialized
[ 0.001288] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003063] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.003714] Mount-cache hash table entries: 256
[ 0.003896] Initializing cgroup subsys ns
[ 0.003943] Initializing cgroup subsys cpuacct
[ 0.004004] Initializing cgroup subsys freezer
[ 0.004049] Initializing cgroup subsys blkio
[ 0.004113] tseg: 007ff80000
[ 0.004115] CPU: Physical Processor ID: 0
[ 0.004160] CPU: Processor Core ID: 0
[ 0.004206] mce: CPU supports 5 MCE banks
[ 0.004259] using C1E aware idle routine
[ 0.004305] Performance Events: AMD PMU driver.
[ 0.004374] ... version: 0
[ 0.004420] ... bit width: 48
[ 0.004465] ... generic registers: 4
[ 0.004510] ... value mask: 0000ffffffffffff
[ 0.004556] ... max period: 00007fffffffffff
[ 0.004601] ... fixed-purpose events: 0
[ 0.004647] ... event mask: 000000000000000f
[ 0.004711] ACPI: Core revision 20091214
[ 0.009048] Setting APIC routing to flat
[ 0.010505] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.011999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.011999] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.011999] ..... (found apic 0 pin 0) ...
[ 0.013999] ....... failed.
[ 0.013999] ...trying to set up timer as Virtual Wire IRQ...
[ 0.013999] ..... failed.
[ 0.013999] ...trying to set up timer as ExtINT IRQ...
[ 0.024110] ..... works.
[ 0.024155] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.024999] Booting Node 0, Processors #1 Ok.
[ 0.095096] Brought up 2 CPUs
[ 0.095142] Total of 2 processors activated (9642.84 BogoMIPS).
[ 0.095381] NET: Registered protocol family 16
[ 0.096026] node 0 link 0: io port [1000, fffff]
[ 0.096026] TOM: 0000000080000000 aka 2048M
[ 0.096069] node 0 link 0: mmio [fc000000, fdffffff]
[ 0.096072] node 0 link 0: mmio [a0000, bffff]
[ 0.096074] node 0 link 0: mmio [80000000, fe0bffff]
[ 0.096077] bus: [00, ff] on node 0 link 0
[ 0.096078] bus: 00 index 0 io port: [0, ffff]
[ 0.096080] bus: 00 index 1 mmio: [80000000, fcffffffff]
[ 0.096082] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.096092] ACPI: bus type pci registered
[ 0.096145] PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xfc000000-0xfc3fffff] (base 0xfc000000)
[ 0.096145] PCI: MMCONFIG at [mem 0xfc000000-0xfc3fffff] reserved in E820
[ 0.096254] PCI: Using configuration type 1 for base access
[ 0.103035] bio: create slab <bio-0> at 0
[ 0.104231] ACPI: EC: Look up EC in DSDT
[ 0.107408] ACPI: Interpreter enabled
[ 0.107459] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.107630] ACPI: Using IOAPIC for interrupt routing
[ 0.112176] ACPI: No dock devices found.
[ 0.112249] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.113017] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.113185] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.113188] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.113191] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.113193] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.113196] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.113199] pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfedfffff] (ignored)
[ 0.113389] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113392] pci 0000:00:02.0: PME# disabled
[ 0.113418] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113420] pci 0000:00:03.0: PME# disabled
[ 0.113444] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113446] pci 0000:00:04.0: PME# disabled
[ 0.113603] pci 0000:00:0a.0: reg 10: [io 0x8800-0x887f]
[ 0.113652] pci 0000:00:0a.1: reg 20: [io 0x88c0-0x88ff]
[ 0.113657] pci 0000:00:0a.1: reg 24: [io 0x8880-0x88bf]
[ 0.113679] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.113684] pci 0000:00:0a.1: PME# disabled
[ 0.113711] pci 0000:00:0b.0: reg 10: [mem 0xf0304000-0xf0304fff]
[ 0.113736] pci 0000:00:0b.0: supports D1 D2
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 11:02 am    Post subject: Reply with quote

Well seems that there is a limit to the maximum size of a message...
I try to continue the previous post
to continue the dmesg

Code:

[    0.113738] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold                                                           
[    0.113741] pci 0000:00:0b.0: PME# disabled                                                                                       
[    0.113761] pci 0000:00:0b.1: reg 10: [mem 0xf0308000-0xf03080ff]                                                                 
[    0.113787] pci 0000:00:0b.1: supports D1 D2                                                                                       
[    0.113789] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold                                                           
[    0.113792] pci 0000:00:0b.1: PME# disabled                                                                                       
[    0.113824] pci 0000:00:0d.0: reg 20: [io  0x8c00-0x8c0f]                                                                         
[    0.113858] pci 0000:00:0e.0: reg 10: [io  0x8c40-0x8c47]                                                                         
[    0.113862] pci 0000:00:0e.0: reg 14: [io  0x8c34-0x8c37]                                                                         
[    0.113866] pci 0000:00:0e.0: reg 18: [io  0x8c38-0x8c3f]                                                                         
[    0.113870] pci 0000:00:0e.0: reg 1c: [io  0x8c30-0x8c33]                                                                         
[    0.113874] pci 0000:00:0e.0: reg 20: [io  0x8c10-0x8c1f]                                                                         
[    0.113878] pci 0000:00:0e.0: reg 24: [mem 0xf0305000-0xf0305fff]                                                                 
[    0.113915] pci 0000:00:0f.0: reg 10: [io  0x8c58-0x8c5f]                                                                         
[    0.113919] pci 0000:00:0f.0: reg 14: [io  0x8c4c-0x8c4f]                                                                         
[    0.113923] pci 0000:00:0f.0: reg 18: [io  0x8c50-0x8c57]                                                                         
[    0.113928] pci 0000:00:0f.0: reg 1c: [io  0x8c48-0x8c4b]                                                                         
[    0.113932] pci 0000:00:0f.0: reg 20: [io  0x8c20-0x8c2f]                                                                         
[    0.113937] pci 0000:00:0f.0: reg 24: [mem 0xf0306000-0xf0306fff]                                                                 
[    0.114062] pci 0000:00:10.1: reg 10: [mem 0xf0300000-0xf0303fff]                                                                 
[    0.114092] pci 0000:00:10.1: PME# supported from D3hot D3cold                                                                     
[    0.114095] pci 0000:00:10.1: PME# disabled                                                                                       
[    0.114124] pci 0000:00:14.0: reg 10: [mem 0xf0307000-0xf0307fff]                                                                 
[    0.114128] pci 0000:00:14.0: reg 14: [io  0x8c60-0x8c67]                                                                         
[    0.114148] pci 0000:00:14.0: supports D1 D2                                                                                       
[    0.114150] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold                                                           
[    0.114153] pci 0000:00:14.0: PME# disabled                                                                                       
[    0.114251] pci 0000:00:02.0: PCI bridge to [bus 01-01]                                                                           
[    0.114333] pci 0000:00:03.0: PCI bridge to [bus 02-02]                                                                           
[    0.114398] pci 0000:03:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]                                                       
[    0.114405] pci 0000:03:00.0: reg 18: [mem 0xf0000000-0xf001ffff 64bit]                                                           
[    0.114409] pci 0000:03:00.0: reg 20: [io  0x9000-0x90ff]                                                                         
[    0.114415] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]                                                             
[    0.114428] pci 0000:03:00.0: supports D1 D2                                                                                       
[    0.114449] pci 0000:03:00.1: reg 10: [mem 0xf0020000-0xf0023fff 64bit]                                                           
[    0.114472] pci 0000:03:00.1: supports D1 D2                                                                                       
[    0.116036] pci 0000:00:04.0: PCI bridge to [bus 03-03]                                                                           
[    0.116083] pci 0000:00:04.0:   bridge window [io  0x9000-0x9fff]                                                                 
[    0.116085] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff]                                                         
[    0.116088] pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]                                               
[    0.116123] pci 0000:00:10.0: PCI bridge to [bus 04-04] (subtractive decode)                                                       
[    0.116180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]                                                                   
[    0.116228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]                                                               
[    0.116249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]                                                               
[    0.116269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]                                                               
[    0.116289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]                                                               
[    0.121204] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.                                                   
[    0.122215] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled.                                                   
[    0.122610] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14 15) *0, disabled.                                                   
[    0.123029] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14 15) *0, disabled.                                                   
[    0.123425] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19 20 21 22 23) *11                                                     
[    0.123840] ACPI: PCI Interrupt Link [LNKF] (IRQs 16 17 18 19 20 21 22 23) *10                                                     
[    0.124240] ACPI: PCI Interrupt Link [LNKG] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.                                           
[    0.125110] ACPI: PCI Interrupt Link [LNKH] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.                                           
[    0.125546] ACPI: PCI Interrupt Link [LNKI] (IRQs 16 17 18 19 20 21 22 23) *7                                                     
[    0.126175] ACPI: PCI Interrupt Link [LNKJ] (IRQs 16 17 18 19 20 21 22 23) *11                                                     
[    0.126590] ACPI: PCI Interrupt Link [LNKK] (IRQs 16 17 18 19 20 21 22 23) *10                                                     
[    0.127026] ACPI: PCI Interrupt Link [LNKL] (IRQs 16 17 18 19 20 21 22 23) *10                                                     
[    0.127441] ACPI: PCI Interrupt Link [LNKM] (IRQs 16 17 18 19 20 21 22 23) *11                                                     
[    0.127856] ACPI: PCI Interrupt Link [LNKN] (IRQs 16 17 18 19 20 21 22 23) *5                                                     
[    0.128240] ACPI: PCI Interrupt Link [LNKO] (IRQs 16 17 18 19 20 21 22 23) *10                                                     
[    0.128655] ACPI: PCI Interrupt Link [LNKP] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.                                           
[    0.129090] SCSI subsystem initialized                                                                                             
[    0.129090] libata version 3.00 loaded.                                                                                           
[    0.129090] usbcore: registered new interface driver usbfs                                                                         
[    0.129090] usbcore: registered new interface driver hub                                                                           
[    0.129090] usbcore: registered new device driver usb                                                                             
[    0.130056] Advanced Linux Sound Architecture Driver Version 1.0.21.                                                               
[    0.130110] PCI: Using ACPI for IRQ routing                                                                                       
[    0.130110] PCI: pci_cache_line_size set to 64 bytes                                                                               
[    0.130162] NetLabel: Initializing                                                                                                 
[    0.130162] NetLabel:  domain hash size = 128                                                                                     
[    0.130162] NetLabel:  protocols = UNLABELED CIPSOv4                                                                               
[    0.130184] NetLabel:  unlabeled traffic allowed by default                                                                       
[    0.130240] HPET: 3 timers in total, 0 timers will be used for per-cpu timer                                                       
[    0.130240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31                                                                               
[    0.130240] hpet0: 3 comparators, 32-bit 25.000000 MHz counter                                                                     
[    0.133007] Switching to clocksource hpet                                                                                         
[    0.133556] pnp: PnP ACPI init                                                                                                     
[    0.133606] ACPI: bus type pnp registered                                                                                         
[    0.135424] pnp: PnP ACPI: found 10 devices                                                                                       
[    0.135472] ACPI: ACPI bus type pnp unregistered                                                                                   
[    0.135528] system 00:01: [io  0x04d0-0x04d1] has been reserved                                                                   
[    0.135575] system 00:01: [io  0x1000-0x107f] has been reserved                                                                   
[    0.135622] system 00:01: [io  0x0600-0x067f] has been reserved                                                                   
[    0.135669] system 00:01: [io  0xfe00] has been reserved                                                                           
[    0.135716] system 00:01: [mem 0xfc000000-0xfdffffff] has been reserved                                                           
[    0.135764] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved                                                       
[    0.135811] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved                                                       
[    0.140520] pci 0000:00:02.0: PCI bridge to [bus 01-01]                                                                           
[    0.140567] pci 0000:00:02.0:   bridge window [io  disabled]                                                                       
[    0.140614] pci 0000:00:02.0:   bridge window [mem disabled]                                                                       
[    0.140661] pci 0000:00:02.0:   bridge window [mem pref disabled]                                                                 
[    0.140708] pci 0000:00:03.0: PCI bridge to [bus 02-02]                                                                           
[    0.140754] pci 0000:00:03.0:   bridge window [io  disabled]                                                                       
[    0.140801] pci 0000:00:03.0:   bridge window [mem disabled]                                                                       
[    0.140847] pci 0000:00:03.0:   bridge window [mem pref disabled]                                                                 
[    0.140898] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0040000-0xf005ffff pref]                                                     
[    0.140967] pci 0000:00:04.0: PCI bridge to [bus 03-03]                                                                           
[    0.141023] pci 0000:00:04.0:   bridge window [io  0x9000-0x9fff]                                                                 
[    0.141070] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff]                                                         
[    0.141117] pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]                                               
[    0.141187] pci 0000:00:10.0: PCI bridge to [bus 04-04]                                                                           
[    0.141233] pci 0000:00:10.0:   bridge window [io  disabled]                                                                       
[    0.141288] pci 0000:00:10.0:   bridge window [mem disabled]                                                                       
[    0.141335] pci 0000:00:10.0:   bridge window [mem pref disabled]                                                                 
[    0.141388] pci 0000:00:02.0: setting latency timer to 64                                                                         
[    0.141392] pci 0000:00:03.0: setting latency timer to 64                                                                         
[    0.141395] pci 0000:00:04.0: setting latency timer to 64                                                                         
[    0.141399] pci 0000:00:10.0: setting latency timer to 64                                                                         
[    0.141402] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]                                                                       
[    0.141404] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]                                                       
[    0.141407] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]                                                                       
[    0.141408] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]                                                               
[    0.141411] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]                                                     
[    0.141413] pci_bus 0000:04: resource 3 [io  0x0000-0xffff]                                                                       
[    0.141415] pci_bus 0000:04: resource 4 [mem 0x00000000-0xffffffffffffffff]                                                       
[    0.141433] NET: Registered protocol family 2                                                                                     
[    0.141549] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)                                                     
[    0.142292] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)                                                 
[    0.144816] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)                                                           
[    0.145498] TCP: Hash tables configured (established 262144 bind 65536)                                                           
[    0.145548] TCP reno registered                                                                                                   
[    0.145604] UDP hash table entries: 1024 (order: 3, 32768 bytes)                                                                   
[    0.145682] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)                                                             
[    0.145818] NET: Registered protocol family 1                                                                                     
[    0.145972] RPC: Registered udp transport module.                                                                                 
[    0.146029] RPC: Registered tcp transport module.                                                                                 
[    0.146075] RPC: Registered tcp NFSv4.1 backchannel transport module.                                                             
[    0.146139] pci 0000:00:00.0: Found disabled HT MSI Mapping                                                                       
[    0.146188] pci 0000:00:00.0: Enabling HT MSI Mapping                                                                             
[    0.146271] pci 0000:00:00.0: Found enabled HT MSI Mapping                                                                         
[    0.146333] pci 0000:00:00.0: Found enabled HT MSI Mapping                                                                         
[    0.146398] pci 0000:00:00.0: Found enabled HT MSI Mapping                                                                         
[    0.348870] pci 0000:00:09.0: Found enabled HT MSI Mapping                                                                         
[    0.348970] pci 0000:00:09.0: Found enabled HT MSI Mapping                                                                         
[    0.349074] pci 0000:00:09.0: Found enabled HT MSI Mapping                                                                         
[    0.349172] pci 0000:00:09.0: Found enabled HT MSI Mapping                                                                         
[    0.349232] pci 0000:03:00.0: Boot video device                                                                                   
[    0.349236] PCI: CLS 64 bytes, default 64                                                                                         
[    0.349381] Simple Boot Flag at 0x36 set to 0x1                                                                                   
[    0.350389] microcode: microcode: CPU0: AMD CPU family 0xf not supported                                                           
[    0.350440] microcode: microcode: CPU1: AMD CPU family 0xf not supported                                                           
[    0.350527] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba                                   
[    0.350597] Scanning for low memory corruption every 60 seconds                                                                   
[    0.350645] Intel PCLMULQDQ-NI instructions are not detected.                                                                     
[    0.351080] HugeTLB registered 2 MB page size, pre-allocated 0 pages                                                               
[    0.353772] VFS: Disk quotas dquot_6.5.2                                                                                           
[    0.353880] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)                                                             
[    0.355134] Slow work thread pool: Starting up                                                                                     
[    0.355225] Slow work thread pool: Ready                                                                                           
[    0.355327] fuse init (API version 7.13)                                                                                           
[    0.355537] msgmni has been set to 4020                                                                                           
[    0.356070] alg: No test for stdrng (krng)                                                                                         
[    0.356266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)                                                   
[    0.356336] io scheduler noop registered                                                                                           
[    0.356382] io scheduler deadline registered                                                                                       
[    0.356542] io scheduler cfq registered (default)                                                                                 
[    0.356732] pcieport 0000:00:02.0: setting latency timer to 64                                                                     
[    0.356747]   alloc irq_desc for 24 on node 0                                                                                     
[    0.356749]   alloc kstat_irqs on node 0                                                                                           
[    0.356756] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X                                                                           
[    0.356925] pcieport 0000:00:03.0: setting latency timer to 64                                                                     
[    0.356936]   alloc irq_desc for 25 on node 0                                                                                     
[    0.356938]   alloc kstat_irqs on node 0                                                                                           
[    0.356941] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X                                                                           
[    0.357129] pcieport 0000:00:04.0: setting latency timer to 64                                                                     
[    0.357140]   alloc irq_desc for 26 on node 0                                                                                     
[    0.357141]   alloc kstat_irqs on node 0                                                                                           
[    0.357144] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X                                                                           
[    0.360697] Non-volatile memory driver v1.3                                                                                       
[    0.360768] Linux agpgart interface v0.103                                                                                         
[    0.361203] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0                                       
[    0.361287] ACPI: Power Button [PWRB]                                                                                             
[    0.361413] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1                                                   
[    0.361483] ACPI: Power Button [PWRF]                                                                                             
[    0.363205] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled                                                               
[    0.365894] brd: module loaded                                                                                                     
[    0.366942] loop: module loaded                                                                                                   
[    0.367508] sata_nv 0000:00:0e.0: version 3.5                                                                                     
[    0.367518] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)                                                                   
[    0.367800] ACPI: PCI Interrupt Link [LNKN] enabled at IRQ 23                                                                     
[    0.367848]   alloc irq_desc for 23 on node 0                                                                                     
[    0.367850]   alloc kstat_irqs on node 0                                                                                           
[    0.367860] sata_nv 0000:00:0e.0: PCI INT A -> Link[LNKN] -> GSI 23 (level, high) -> IRQ 23                                       
[    0.367930] sata_nv 0000:00:0e.0: Using SWNCQ mode                                                                                 
[    0.368034] sata_nv 0000:00:0e.0: setting latency timer to 64                                                                     
[    0.368178] scsi0 : sata_nv                                                                                                       
[    0.368421] scsi1 : sata_nv                                                                                                       
[    0.368646] ata1: SATA max UDMA/133 cmd 0x8c40 ctl 0x8c34 bmdma 0x8c10 irq 23                                                     
[    0.368694] ata2: SATA max UDMA/133 cmd 0x8c38 ctl 0x8c30 bmdma 0x8c18 irq 23                                                     
[    0.369024] ACPI: PCI Interrupt Link [LNKO] enabled at IRQ 22                                                                     
[    0.369072]   alloc irq_desc for 22 on node 0                                                                                     
[    0.369074]   alloc kstat_irqs on node 0                                                                                           
[    0.369082] sata_nv 0000:00:0f.0: PCI INT A -> Link[LNKO] -> GSI 22 (level, high) -> IRQ 22                                       
[    0.369152] sata_nv 0000:00:0f.0: Using SWNCQ mode                                                                                 
[    0.369234] sata_nv 0000:00:0f.0: setting latency timer to 64                                                                     
[    0.369378] scsi2 : sata_nv                                                                                                       
[    0.369549] scsi3 : sata_nv                                                                                                       
[    0.369759] ata3: SATA max UDMA/133 cmd 0x8c58 ctl 0x8c4c bmdma 0x8c20 irq 22                                                     
[    0.369807] ata4: SATA max UDMA/133 cmd 0x8c50 ctl 0x8c48 bmdma 0x8c28 irq 22                                                     
[    0.369984] pata_amd 0000:00:0d.0: version 0.4.1                                                                                   
[    0.370036] pata_amd 0000:00:0d.0: setting latency timer to 64                                                                     
[    0.370111] scsi4 : pata_amd                                                                                                       
[    0.370325] scsi5 : pata_amd                                                                                                       
[    0.370475] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x8c00 irq 14                                                       
[    0.370523] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8c08 irq 15                                                       
[    0.370801] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de                                                                 
[    0.370937] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.                                                   
[    0.371240] ACPI: PCI Interrupt Link [LNKL] enabled at IRQ 21                                                                     
[    0.371294]   alloc irq_desc for 21 on node 0                                                                                     
[    0.371295]   alloc kstat_irqs on node 0                                                                                           
[    0.371304] forcedeth 0000:00:14.0: PCI INT A -> Link[LNKL] -> GSI 21 (level, high) -> IRQ 21                                     
[    0.371375] forcedeth 0000:00:14.0: setting latency timer to 64                                                                   
[    0.371426] nv_probe: set workaround bit for reversed mac addr                                                                     
[    0.682777] ata3: SATA link down (SStatus 0 SControl 300)                                                                         
[    0.822057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                                                 
[    0.882400] ata1.00: ATA-7: ST3160815AS, 3.AAA, max UDMA/133                                                                       
[    0.882447] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)                                                         
[    0.884742] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:99:0c:62:13                                         
[    0.884813] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3                                                             
[    0.884973] console [netcon0] enabled                                                                                             
[    0.885029] netconsole: network logging started                                                                                   
[    0.885312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                                                             
[    0.885359] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96                                                                   
[    0.885592] ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 20                                                                     
[    0.885640]   alloc irq_desc for 20 on node 0                                                                                     
[    0.885641]   alloc kstat_irqs on node 0                                                                                           
[    0.885650] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LNKI] -> GSI 20 (level, high) -> IRQ 20                                       
[    0.885729] ehci_hcd 0000:00:0b.1: setting latency timer to 64                                                                     
[    0.885731] ehci_hcd 0000:00:0b.1: EHCI Host Controller                                                                           
[    0.885793] drivers/usb/core/inode.c: creating file 'devices'                                                                     
[    0.885796] drivers/usb/core/inode.c: creating file '001'                                                                         
[    0.885854] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1                                                   
[    0.885929] ehci_hcd 0000:00:0b.1: reset hcs_params 0x101888 dbg=1 cc=1 pcc=8 !ppc ports=8                                         
[    0.885938] ehci_hcd 0000:00:0b.1: reset portroute 0 0 0 0 0 0 0 0                                                                 
[    0.885941] ehci_hcd 0000:00:0b.1: reset hcc_params a086 caching frame 256/512/1024 park                                           
[    0.885961] ehci_hcd 0000:00:0b.1: park 0                                                                                         
[    0.885966] ehci_hcd 0000:00:0b.1: debug port 1                                                                                   
[    0.886023] ehci_hcd 0000:00:0b.1: reset command 080b32 park=3 ithresh=8 Async Periodic period=1024 Reset HALT                     
[    0.886028] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported                                                         
[    0.886030] ehci_hcd 0000:00:0b.1: supports USB remote wakeup                                                                     
[    0.886053] ehci_hcd 0000:00:0b.1: irq 20, io mem 0xf0308000                                                                       
[    0.886101] ehci_hcd 0000:00:0b.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT                                   
[    0.886107] ehci_hcd 0000:00:0b.1: init command 010009 (park)=0 ithresh=1 period=256 RUN                                           
[    0.892015] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00                                                                     
[    0.892079] usb usb1: default language 0x0409                                                                                     
[    0.892084] usb usb1: udev 1, busnum 1, minor = 0                                                                                 
[    0.892086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002                                                         
[    0.892132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                     
[    0.892201] usb usb1: Product: EHCI Host Controller                                                                               
[    0.892247] usb usb1: Manufacturer: Linux 2.6.33-gentoo ehci_hcd                                                                   
[    0.892300] usb usb1: SerialNumber: 0000:00:0b.1                                                                                   
[    0.892381] usb usb1: uevent                                                                                                       
[    0.892429] usb usb1: usb_probe_device                                                                                             
[    0.892432] usb usb1: configuration #1 chosen from 1 choice                                                                       
[    0.892439] usb usb1: adding 1-0:1.0 (config #1, interface 0)                                                                     
[    0.892449] usb 1-0:1.0: uevent                                                                                                   
[    0.892498] hub 1-0:1.0: usb_probe_interface                                                                                       
[    0.892500] hub 1-0:1.0: usb_probe_interface - got id                                                                             
[    0.892502] hub 1-0:1.0: USB hub found                                                                                             
[    0.892551] hub 1-0:1.0: 8 ports detected                                                                                         
[    0.892596] hub 1-0:1.0: standalone hub                                                                                           
[    0.892598] hub 1-0:1.0: no power switching (usb 1.0)                                                                             
[    0.892599] hub 1-0:1.0: individual port over-current protection                                                                   
[    0.892601] hub 1-0:1.0: power on to power good time: 20ms                                                                         
[    0.892605] hub 1-0:1.0: local power source is good                                                                               
[    0.892608] hub 1-0:1.0: trying to enable port power on non-switchable hub                                                         
[    0.892635] drivers/usb/core/inode.c: creating file '001'                                                                         
[    0.892703] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver                                                                 
[    0.892750] ohci_hcd: block sizes: ed 80 td 96                                                                                     
[    0.892971] ACPI: PCI Interrupt Link [LNKJ] enabled at IRQ 19                                                                     
[    0.893032]   alloc irq_desc for 19 on node 0                                                                                     
[    0.893033]   alloc kstat_irqs on node 0                                                                                           
[    0.893042] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKJ] -> GSI 19 (level, high) -> IRQ 19                                       
[    0.893120] ohci_hcd 0000:00:0b.0: setting latency timer to 64                                                                     
[    0.893122] ohci_hcd 0000:00:0b.0: OHCI Host Controller                                                                           
[    0.893172] drivers/usb/core/inode.c: creating file '002'                                                                         
[    0.893239] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2                                                   
[    0.893327] ohci_hcd 0000:00:0b.0: created debug files                                                                             
[    0.893329] ohci_hcd 0000:00:0b.0: supports USB remote wakeup                                                                     
[    0.893347] ohci_hcd 0000:00:0b.0: irq 19, io mem 0xf0304000                                                                       
[    0.946031] ohci_hcd 0000:00:0b.0: OHCI controller state                                                                           
[    0.946034] ohci_hcd 0000:00:0b.0: OHCI 1.0, NO legacy support registers                                                           
[    0.946037] ohci_hcd 0000:00:0b.0: control 0x683 RWE RWC HCFS=operational CBSR=3                                                   
[    0.946040] ohci_hcd 0000:00:0b.0: cmdstatus 0x00000 SOC=0                                                                         
[    0.946043] ohci_hcd 0000:00:0b.0: intrstatus 0x00000004 SF                                                                       
[    0.946046] ohci_hcd 0000:00:0b.0: intrenable 0x8000004a MIE RHSC RD WDH                                                           
[    0.946052] ohci_hcd 0000:00:0b.0: hcca frame #0003                                                                               
[    0.946055] ohci_hcd 0000:00:0b.0: roothub.a 01000208 POTPGT=1 NPS NDP=8(8)                                                       
[    0.946058] ohci_hcd 0000:00:0b.0: roothub.b 00000000 PPCM=0000 DR=0000                                                           
[    0.946061] ohci_hcd 0000:00:0b.0: roothub.status 00008000 DRWE                                                                   
[    0.946064] ohci_hcd 0000:00:0b.0: roothub.portstatus [0] 0x00000100 PPS                                                           
[    0.946068] ohci_hcd 0000:00:0b.0: roothub.portstatus [1] 0x00000100 PPS                                                           
[    0.946071] ohci_hcd 0000:00:0b.0: roothub.portstatus [2] 0x00000100 PPS                                                           
[    0.946074] ohci_hcd 0000:00:0b.0: roothub.portstatus [3] 0x00000100 PPS                                                           
[    0.946077] ohci_hcd 0000:00:0b.0: roothub.portstatus [4] 0x00000100 PPS                                                           
[    0.946080] ohci_hcd 0000:00:0b.0: roothub.portstatus [5] 0x00000100 PPS                                                           
[    0.946083] ohci_hcd 0000:00:0b.0: roothub.portstatus [6] 0x00000100 PPS                                                           
[    0.946086] ohci_hcd 0000:00:0b.0: roothub.portstatus [7] 0x00000100 PPS                                                           
[    0.946094] usb usb2: default language 0x0409                                                                                     
[    0.946098] usb usb2: udev 1, busnum 2, minor = 128                                                                               
[    0.946100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001                                                         
[    0.946147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                     
[    0.946216] usb usb2: Product: OHCI Host Controller                                                                               
[    0.946269] usb usb2: Manufacturer: Linux 2.6.33-gentoo ohci_hcd                                                                   
[    0.946966] usb usb2: SerialNumber: 0000:00:0b.0                                                                                   
[    0.947050] usb usb2: uevent                                                                                                       
[    0.947101] usb usb2: usb_probe_device                                                                                             
[    0.947103] usb usb2: configuration #1 chosen from 1 choice                                                                       
[    0.947108] usb usb2: adding 2-0:1.0 (config #1, interface 0)                                                                     
[    0.947119] usb 2-0:1.0: uevent                                                                                                   
[    0.947166] hub 2-0:1.0: usb_probe_interface                                                                                       
[    0.947168] hub 2-0:1.0: usb_probe_interface - got id                                                                             
[    0.947170] hub 2-0:1.0: USB hub found                                                                                             
[    0.947220] hub 2-0:1.0: 8 ports detected                                                                                         
[    0.947272] hub 2-0:1.0: standalone hub                                                                                           
[    0.947273] hub 2-0:1.0: no power switching (usb 1.0)                                                                             
[    0.947275] hub 2-0:1.0: global over-current protection                                                                           
[    0.947277] hub 2-0:1.0: power on to power good time: 2ms                                                                         
[    0.947281] hub 2-0:1.0: local power source is good                                                                               
[    0.947283] hub 2-0:1.0: no over-current condition exists                                                                         
[    0.947285] hub 2-0:1.0: trying to enable port power on non-switchable hub                                                         
[    0.947302] drivers/usb/core/inode.c: creating file '001'                                                                         
[    0.947379] uhci_hcd: USB Universal Host Controller Interface driver                                                               
[    0.947635] usbcore: registered new interface driver usblp                                                                         
[    0.947682] Initializing USB Mass Storage driver...                                                                               
[    0.947785] usbcore: registered new interface driver usb-storage                                                                   
[    0.947831] USB Mass Storage support registered.                                                                                   
[    0.947930] usbcore: registered new interface driver libusual                                                                     
[    0.948088] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12                                                 
[    0.950851] serio: i8042 KBD port at 0x60,0x64 irq 1                                                                               
[    0.950900] serio: i8042 AUX port at 0x60,0x64 irq 12                                                                             
[    0.951101] mice: PS/2 mouse device common for all mice                                                                           
[    0.951425] input: PC Speaker as /devices/platform/pcspkr/input/input2                                                             
[    0.951551] I2O subsystem v1.325                                                                                                   
[    0.951596] i2o: max drivers = 8                                                                                                   
[    0.951834] rtc_cmos 00:03: RTC can wake from S4                                                                                   
[    0.951944] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0                                                                 
[    0.952035] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs                                                         
[    0.952119] i2c /dev entries driver                                                                                               
[    0.952511] i2c i2c-0: nForce2 SMBus adapter at 0x88c0                                                                             
[    0.952641] i2c i2c-1: nForce2 SMBus adapter at 0x8880                                                                             
[    0.952768] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141                                         
[    0.952980] cpuidle: using governor ladder                                                                                         
[    0.953044] cpuidle: using governor menu                                                                                           
[    0.953296] usbcore: registered new interface driver hiddev                                                                       
[    0.953382] usbcore: registered new interface driver usbhid                                                                       
[    0.953428] usbhid: USB HID core driver                                                                                           
[    0.953996] usbcore: registered new interface driver snd-usb-audio                                                                 
[    0.954069] ALSA device list:                                                                                                     
[    0.954114]   No soundcards found.                                                                                                 
[    0.954198] Netfilter messages via NETLINK v0.30.                                                                                 
[    0.954259] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)                                                                 
[    0.954557] ctnetlink v0.93: registering with nfnetlink.                                                                           
[    0.954730] ip_tables: (C) 2000-2006 Netfilter Core Team                                                                           
[    0.954803] TCP cubic registered                                                                                                   
[    0.954848] Initializing XFRM netlink socket                                                                                       
[    0.955143] NET: Registered protocol family 10                                                                                     
[    0.955396] ip6_tables: (C) 2000-2006 Netfilter Core Team                                                                         
[    0.955465] IPv6 over IPv4 tunneling driver                                                                                       
[    0.955656] NET: Registered protocol family 17                                                                                     
[    0.955735] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)         
[    0.955849] powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0xe                                                                       
[    0.955902] powernow-k8:    1 : fid 0xe (2200 MHz), vid 0x10                                                                       
[    0.955949] powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x10                                                                       
[    0.955995] powernow-k8:    3 : fid 0xa (1800 MHz), vid 0x10                                                                       
[    0.956062] powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12                                                                       
[    0.957370] ata1.00: configured for UDMA/133                                                                                       
[    0.957525] scsi 0:0:0:0: Direct-Access     ATA      ST3160815AS      3.AA PQ: 0 ANSI: 5                                           
[    0.957859] sd 0:0:0:0: Attached scsi generic sg0 type 0                                                                           
[    0.957957] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)                                                 
[    0.958091] sd 0:0:0:0: [sda] Write Protect is off                                                                                 
[    0.958138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                                                                             
[    0.958154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                               
[    0.958316]  sda:                                                                                                                 
[    0.971766] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3                                     
[    0.992046] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000                                                                         
[    1.013705]  sda1 sda2 sda3 sda4 < sda5 sda6 >                                                                                     
[    1.042682] sd 0:0:0:0: [sda] Attached SCSI disk                                                                                   
[    1.047035] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000                                                                         
[    1.271529] ata2: SATA link down (SStatus 0 SControl 300)                                                                         
[    1.584528] ata4: SATA link down (SStatus 0 SControl 300)                                                                         
[    1.584619] ata6: port disabled. ignoring.                                                                                         
[    1.614089] kjournald starting.  Commit interval 5 seconds                                                                         
[    1.614142] EXT3-fs (sda6): mounted filesystem with writeback data mode                                                           
[    1.614239] VFS: Mounted root (ext3 filesystem) readonly on device 8:6.                                                           
[    1.614306] Freeing unused kernel memory: 520k freed                                                                               
[    1.954036] ohci_hcd 0000:00:0b.0: auto-stop root hub                                                                             
[    3.701024] hub 1-0:1.0: hub_suspend                                                                                               
[    3.701032] usb usb1: bus auto-suspend                                                                                             
[    3.701034] ehci_hcd 0000:00:0b.1: suspend root hub                                                                               
[    3.701051] hub 2-0:1.0: hub_suspend                                                                                               
[    3.701053] usb usb2: bus auto-suspend                                                                                             
[    3.701056] ohci_hcd 0000:00:0b.0: suspend root hub                                                                               
[    4.249050] udev: starting version 149                                                                                             
[    4.259465] usb usb2: uevent                                                                                                       
[    4.259482] usb 2-0:1.0: uevent                                                                                                   
[    4.259531] usb usb1: uevent                                                                                                       
[    4.259550] usb 1-0:1.0: uevent                                                                                                   
[    4.291049] usb usb2: uevent                                                                                                       
[    4.291995] usb usb1: uevent                                                                                                       
[    4.586483] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.                   
[    4.586487] Disabling lock debugging due to kernel taint                                                                           
[    4.634092] [fglrx] Maximum main memory to use for locked dma buffers: 1883 MBytes.                                               
[    4.634148] [fglrx]   vendor: 1002 device: 68b8 count: 1                                                                           
[    4.634455] [fglrx] ioport: bar 4, base 0x9000, size: 0x100                                                                       
[    4.634681] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18                                                                     
[    4.634685]   alloc irq_desc for 18 on node 0                                                                                     
[    4.634687]   alloc kstat_irqs on node 0                                                                                           
[    4.634698] pci 0000:03:00.0: PCI INT A -> Link[LNKE] -> GSI 18 (level, high) -> IRQ 18                                           
[    4.634703] pci 0000:03:00.0: setting latency timer to 64                                                                         
[    4.634974] [fglrx] Kernel PAT support is enabled                                                                                 
[    4.634998] [fglrx] module loaded - fglrx 8.71.4 [Mar  2 2010] with 1 minors                                                       
[    6.009445] EXT3-fs (sda6): using internal journal                                                                                 
[    6.989550] EXT2-fs (sda5): warning: mounting ext3 filesystem as ext2                                                             
[    7.084189] kjournald starting.  Commit interval 5 seconds                                                                         
[    7.084495] EXT3-fs (sda2): using internal journal                                                                                 
[    7.084499] EXT3-fs (sda2): mounted filesystem with writeback data mode                                                           
[    7.208053] Adding 1951888k swap on /dev/sda3.  Priority:-1 extents:1 across:1951888k                                             
[   27.389032] eth0: no IPv6 routers present


Last edited by Captain Sifff on Mon Apr 12, 2010 11:08 am; edited 1 time in total
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 11:06 am    Post subject: Reply with quote

Well seems that there is a limit to the maximum size of a message...
I try to continue the previous 2 posts
to continue the dmesg
This is the part where I manually unloaded the module
Code:
                                                                           
[ 2654.860393] pci 0000:03:00.0: PCI INT A disabled                                                                                   
[ 2654.860407] [fglrx] module unloaded - fglrx 8.71.4 [Mar  2 2010]                                                                   
[ 2748.430040] [fglrx] Maximum main memory to use for locked dma buffers: 1883 MBytes.                                               
[ 2748.430099] [fglrx]   vendor: 1002 device: 68b8 count: 1                                                                           
[ 2748.430410] [fglrx] ioport: bar 4, base 0x9000, size: 0x100                                                                       
[ 2748.430427] pci 0000:03:00.0: PCI INT A -> Link[LNKE] -> GSI 18 (level, high) -> IRQ 18                                           
[ 2748.430432] pci 0000:03:00.0: setting latency timer to 64                                                                         
[ 2748.430704] [fglrx] Kernel PAT support is enabled                                                                                 
[ 2748.430733] [fglrx] module loaded - fglrx 8.71.4 [Mar  2 2010] with 1 minors                                                       
[ 2774.484030] [fglrx:firegl_cail_init] *ERROR* CAIL: CAILEarlyASICInit failed, error 1                                               
[ 2774.484035] [fglrx:hal_init_asic] *ERROR* Failed to initialize ASIC.                                                               
[ 2774.484138] BUG: unable to handle kernel NULL pointer dereference at 00000000000007a0                                             
[ 2774.484143] IP: [<ffffffffa02a3e40>] CAILQueryMCAddressRange+0x0/0x30 [fglrx]                                                     
[ 2774.484207] PGD 7e3a0067 PUD 7d399067 PMD 0                                                                                       
[ 2774.484211] Oops: 0000 [#1] SMP                                                                                                   
[ 2774.484214] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/0000:03:00.1/resource                                           
[ 2774.484216] pci 0000:03:00.0: PCI INT A disabled                                                                                   
[ 2774.484221] CPU 0                                                                                                                 
[ 2774.484226] Pid: 28702, comm: X Tainted: P  R        2.6.33-gentoo #1 D2461-A2/ESPRIMO P                                           
[ 2774.484229] RIP: 0010:[<ffffffffa02a3e40>]  [<ffffffffa02a3e40>] CAILQueryMCAddressRange+0x0/0x30 [fglrx]                         
[ 2774.484256] RSP: 0018:ffff88007e147d80  EFLAGS: 00010216                                                                           
[ 2774.484258] RAX: ffff88007e147d88 RBX: ffff88007d188000 RCX: 0000000000000000                                                     
[ 2774.484261] RDX: 0000000000000001 RSI: ffff88007e147d88 RDI: 0000000000000000                                                     
[ 2774.484263] RBP: ffff88007e147de0 R08: 0000000000000000 R09: ffff88007e147d88                                                     
[ 2774.484266] R10: 0000000000000000 R11: 0000000000003246 R12: 0000000000000000                                                     
[ 2774.484268] R13: 0000000000000001 R14: ffff88007e147de8 R15: ffff88007e0ef000                                                     
[ 2774.484271] FS:  00007f856154b6f0(0000) GS:ffff880001a00000(0000) knlGS:0000000000000000                                           
[ 2774.484273] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033                                                                     
[ 2774.484276] CR2: 00000000000007a0 CR3: 000000007d3cb000 CR4: 00000000000006f0                                                     
[ 2774.484278] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000                                                     
[ 2774.484281] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400                                                     
[ 2774.484283] Process X (pid: 28702, threadinfo ffff88007e146000, task ffff880051878c40)                                             
[ 2774.484286] [fglrx] module unloaded - fglrx 8.71.4 [Mar  2 2010]                                                                   
[ 2774.484288] Stack:                                                                                                                 
[ 2774.484290]  ffffffffa02827e1 0000000000000000 0000000000000000 0000000000000000                                                   
[ 2774.484294] <0> 00000000000007f8 00000000000007f8 00007fffb558b1e0 ffff88007d188000                                               
[ 2774.484298] <0> ffff88007f08a800 0000000080186455 ffffffffa027bd7c 0000000000000001                                               
[ 2774.484302] Call Trace:                                                                                                           
[ 2774.484326]  [<ffffffffa02827e1>] ? firegl_cail_query_mc_range+0x71/0xc0 [fglrx]                                                   
[ 2774.484349]  [<ffffffffa027bd7c>] ? __ke_strchr+0x1fc/0x340 [fglrx]                                                               
[ 2774.484371]  [<ffffffffa027bd00>] ? __ke_strchr+0x180/0x340 [fglrx]                                                               
[ 2774.484393]  [<ffffffffa027a01a>] ? firegl_ioctl+0x1ea/0xef0 [fglrx]                                                               
[ 2774.484399]  [<ffffffff810d75f6>] ? vfs_ioctl+0x96/0xd0                                                                           
[ 2774.484402]  [<ffffffff810d7ad8>] ? do_vfs_ioctl+0x88/0x590                                                                       
[ 2774.484405]  [<ffffffff810d8060>] ? sys_ioctl+0x80/0xa0                                                                           
[ 2774.484409]  [<ffffffff810c970e>] ? sys_write+0x4e/0x90                                                                           
[ 2774.484413]  [<ffffffff81002deb>] ? system_call_fastpath+0x16/0x1b                                                                 
[ 2774.484415] Code: 00 b8 03 00 00 00 f6 c2 04 74 12 f7 c2 00 00 02 00 b8 0a 00 00 00 75 05 e9 ce d2 01 00 c3 66 66 66 90 66 66 90 66 66 90 66 66 90 <8b> 8f a0 07 00 00 b8 03 00 00 00 f6 c1 04 74 12 f7 c1 00 00 02                                                           
[ 2774.484442] RIP  [<ffffffffa02a3e40>] CAILQueryMCAddressRange+0x0/0x30 [fglrx]                                                       
[ 2774.484468]  RSP <ffff88007e147d80>                                                                                                   
[ 2774.484469] CR2: 00000000000007a0                                                                                                     
[ 2774.484472] ---[ end trace 4bbe7c895c43559d ]---                                                                                     
[ 2774.485776] BUG: unable to handle kernel NULL pointer dereference at (null)                                                           
[ 2774.485781] IP: [<ffffffff814de148>] _raw_spin_lock_irqsave+0x8/0x20                                                                 
[ 2774.485789] PGD 7e27c067 PUD 7ea12067 PMD 0                                                                                           
[ 2774.485794] Oops: 0002 [#2] SMP                                                                                                       
[ 2774.485798] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/0000:03:00.1/resource                                               
[ 2774.485800] CPU 1                                                                                                                     
[ 2774.485805] Pid: 28702, comm: X Tainted: P  R   D    2.6.33-gentoo #1 D2461-A2/ESPRIMO P                                             
[ 2774.485817] RIP: 0010:[<ffffffff814de148>]  [<ffffffff814de148>] _raw_spin_lock_irqsave+0x8/0x20                                     
[ 2774.485822] RSP: 0018:ffff88007e147970  EFLAGS: 00010096                                                                             
[ 2774.485823] RAX: 0000000000000296 RBX: 0000000000000000 RCX: 0000000000000005                                                         
[ 2774.485825] RDX: 0000000000000100 RSI: ffff880000000000 RDI: 0000000000000000                                                         
[ 2774.485826] RBP: ffff88007f08a800 R08: 0000000000000000 R09: ffffffffa0360560                                                         
[ 2774.485828] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000                                                         
[ 2774.485829] R13: 0000000000000000 R14: ffff88007d189c08 R15: 000000000000701e                                                         
[ 2774.485832] FS:  00007f856154b6f0(0000) GS:ffff880001b00000(0000) knlGS:0000000000000000                                             
[ 2774.485835] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b                                                                         
[ 2774.485837] CR2: 0000000000000000 CR3: 000000007d8ac000 CR4: 00000000000006e0                                                         
[ 2774.485839] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000                                                         
[ 2774.485841] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400                                                         
[ 2774.485844] Process X (pid: 28702, threadinfo ffff88007e146000, task ffff880051878c40)                                               
[ 2774.485845] Stack:
[ 2774.485847]  ffffffff81057466 ffff88007f08a800 0000000000000000 0000000000000000
[ 2774.485851] <0> 0000000000000300 ffff88007f08a800 ffffffffa029d748 ffff88007f08a800
[ 2774.485856] <0> ffffffff0000701e ffff880000000000 0000030000000000 ffff88007f08aa80
[ 2774.485861] Call Trace:
[ 2774.485867]  [<ffffffff81057466>] ? down_interruptible+0x16/0x60
[ 2774.485872]  [<ffffffff810ca5c7>] ? __fput+0xf7/0x250
[ 2774.485879]  [<ffffffff810c6e06>] ? filp_close+0x56/0x90
[ 2774.485882]  [<ffffffff8103df9d>] ? put_files_struct+0xcd/0x100
[ 2774.485885]  [<ffffffff8103eda9>] ? do_exit+0x6a9/0x780
[ 2774.485887]  [<ffffffff814dba33>] ? printk+0x40/0x45
[ 2774.485890]  [<ffffffff8103d22c>] ? kmsg_dump+0x7c/0x150
[ 2774.485894]  [<ffffffff8100725a>] ? oops_end+0x9a/0xe0
[ 2774.485899]  [<ffffffff81024b3b>] ? no_context+0xfb/0x260
[ 2774.485903]  [<ffffffff81024eef>] ? __bad_area+0x2f/0x50
[ 2774.485906]  [<ffffffff814de71f>] ? page_fault+0x1f/0x30
[ 2774.485910]  [<ffffffff810d75f6>] ? vfs_ioctl+0x96/0xd0
[ 2774.485914]  [<ffffffff810d7ad8>] ? do_vfs_ioctl+0x88/0x590
[ 2774.485916]  [<ffffffff810d8060>] ? sys_ioctl+0x80/0xa0
[ 2774.485918]  [<ffffffff810c970e>] ? sys_write+0x4e/0x90
[ 2774.485921]  [<ffffffff81002deb>] ? system_call_fastpath+0x16/0x1b
[ 2774.485923] Code: 00 00 00 b8 00 01 00 00 f0 66 0f c1 07 38 e0 74 06 f3 90 8a 07 eb f6 c3 66 66 2e 0f 1f 84 00 00 00 00 00 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 38 f2 74 06 f3 90 8a 17 eb f6 c3 0f 1f 84 00 00
[ 2774.485964] RIP  [<ffffffff814de148>] _raw_spin_lock_irqsave+0x8/0x20
[ 2774.485968]  RSP <ffff88007e147970>
[ 2774.485969] CR2: 0000000000000000
[ 2774.485972] ---[ end trace 4bbe7c895c43559e ]---
[ 2774.485975] Fixing recursive fault but reboot is needed!

I could reproduce this behaviour with gentoo-sources-2.6.31-r10(latest stable release last week) and gentoo-sources-2.6.33(latest unstable release last week). I tried at-drivers 10.1 to 10.4(OGL4 preview). I could get the fglrx driver to load the X-Server if I disable mtrr in the kernel config. I'll post my kernel config later...
My output of lspci is:
Code:

00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 VGA compatible controller: ATI Technologies Inc Device 68b8
03:00.1 Audio device: ATI Technologies Inc Device aa58


I have 2GB of RAM and my output of /proc/mtrr is:

Code:

reg00: base=0x000000000 (    0MB), size= 2048MB, count=1: write-back

I know this is a rather long post, bu I just don't know any more I can try...
Thanks a lot!
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Mon Apr 12, 2010 11:14 am    Post subject: Reply with quote

Hi Captain Sifff
I still have the problem and i dont know how to solve it. For now i am using radeon + kms. By the way what do You mean by saying "I could get the fglrx driver to load the X-Server if I disable mtrr in the kernel config"? Does it mean that You were able to run X server + fglrx without any crashes with 3d acceleration?
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 11:44 am    Post subject: Reply with quote

No It means that the module will load, but as it lacks access to the mtrr's it won't use any accelerated features(not sure about 2D, but for 3D you will definitely be using MESA). Your Xorg.0.log will be full of errors indicating that. But somehow the driver is then able to initialize the GPU.
I mentioned that as a probable hint that we might have some problem with the setup of our mtrr registers. the kernel output in my dmesg looks fine in regard to that. You might look through yours if you have some kind of "Faulty BIOS setting. Fixing up ..." messages at the beginning of your dmesg. Probably you can fix your mainboard then with a BIOS upgrade. Nevertheless my conjecture might be completely off-track...
I can't use the radeon driver on Xorg-1.6.5 as it lacks support for my GPU.
I was intrigued that you're seeing a similar problem with exactly the same symptoms(your X-server crashes at the same line as mine) with different hardware on the the same chipset(some kind of nForce4). So probably there's some problem how the kernel initializes the chipset.
As a wild guess you probably might go back to some very old kernel (pre - KMS), as the radeon-driver seems to work. Have you looked through the logs (dmesg, Xorg.0.log) if you use the radeon driver, if you see some messages, that the kernel is, again, fixing sth. up?
I also notice that you don't have acpid running, you might want to start it... but it won't change anything....
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 1:31 pm    Post subject: Reply with quote

Judging from the posts here
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=554847
here
http://ati.cchtml.com/show_bug.cgi?id=1700
or here
http://ati.cchtml.com/show_bug.cgi?id=1241
of course I forgot to add the blog about this problem(not by me...)
http://slackware-radeonhd5770-compatibility.blogspot.com/

It seems our only hope is an update that fixes the problems of AMD cards on AMD systems with NVidia chipsets...
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 3:08 pm    Post subject: Reply with quote

Same behaviour with gentoo-sources-2.6.27-r8 ...
Same behaviour with gentoo-sources-2.6.33-r1 + xorg 1.6.5-r1 + Ubuntu prerelease of 10.4 driver
:(
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Mon Apr 12, 2010 5:02 pm    Post subject: Reply with quote

2.6.28 2.6.30 31 32 33 + xorg -server 1.6.x + ati-drivers 9.11 10.3 10.4 and xorg-server 1.7x + ati 10.4 = fail
Btw try ubuntu 9.04, this one works for me, upgrading to 9.10 or installing 9.10 = fail again.
EDIT: i guess it wont work for you, since your card is new.
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Mon Apr 12, 2010 7:59 pm    Post subject: Reply with quote

Man... you did quite some awesome testing!
probably we can still learn sth. from your success with ubuntu 9.04...
what software was running there?
so...
kernel version, X-Server, ati-driver version?
How well did it run?(OK, for now I would be happy if it just booted X...)
And just to make sure, you had Ubuntu 9.04 installed on your box, the one with the nForce chipset(The nForce chipset thing is the only pattern I see at work here...)
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Mon Apr 12, 2010 8:07 pm    Post subject: Reply with quote

Ubuntu 9.04 uses custom 2.6.28 kernel, xorg 1.6.X but not 5 and dunno which catalyst version, their versioning system like fglrx-ubuntu-xxx sucks. I will try to install 9.04 tommorow to do some testing. Dunno how well it ran, but quakelive ran smoothly with bloom and all. I didnt tried any other games like quake wars, which i played on windows.
I tried 2.6.28.10 vanilla on gentoo (custom config, maybe i should enable everything lol) xorg-server 1.6.5 and catalyst 9.9 but that didn't work, guess ubuntu uses something older than 9.9 catalyst.
Back to top
View user's profile Send private message
Captain Sifff
n00b
n00b


Joined: 12 Apr 2010
Posts: 14

PostPosted: Tue Apr 13, 2010 12:20 pm    Post subject: Reply with quote

phoen1x, could you please post your ouput of "cat /proc/mtrr" ?
I suspect you also have only one entry there...
Back to top
View user's profile Send private message
phoen1x
n00b
n00b


Joined: 23 Mar 2008
Posts: 37

PostPosted: Tue Apr 13, 2010 1:43 pm    Post subject: Reply with quote

Okay I can now confirm (i will do more testing) that this is fglrx driver bug. I have installed ubuntu 9.04 checked loaded modules, checked kernel config (well it differs from mine but its more generic plus ubuntu custom stuff) and i decided to check if newest official drivers will work on same kernel. I installed catalyst 10.3 and i got blank screen. By default ubuntu 9.04 were using catalyst drivers 9.4 (fglrx version 8.600). After that i booted into gentoo, masked xorg-1.7x stuff and installed ati-drivers 9.4 (kernel 2.6.28.10 vanilla) and i can confirm that those drivers WORK with nvidia nforce 430 chipset. I didnt tried 9.5 9.6 9.7 9.8 drivers, maybe they work too, i will try them on ubuntu later. Now i happy that i can play quakelive without problems with constant 125 fps. Hope amd/ati will look at that bugreport filled by some guy with nforce 430 chipset. This bug does not affect newer nforce chipsets.
/proc/mtrr
Code:
reg00: base=0x000000000 (    0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size=  256MB, count=1: write-back
reg03: base=0x100000000 ( 4096MB), size=  512MB, count=1: write-back
reg04: base=0x120000000 ( 4608MB), size=  256MB, count=1: write-back
reg05: base=0x0e0000000 ( 3584MB), size=  256MB, count=1: write-combining
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum