| View previous topic :: View next topic |
| Author |
Message |
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
 Posted: Fri Feb 05, 2010 2:57 am Post subject: Hi, WPA wireless issue? |
 |
|
| I use a self-compiled kernel from gentoo-sources without genkernel for my eeepc 900HD computer. Wireless works fine for the most part, however, there are some issues with it. I cannot connect to WPA networks. I am using a B usb wireless device to connect now. I posted the results of connecting to my internal wireless with wpa_supplicant. http://pastebin.com/d3ce9dda5 Help would be appreciated. |
|
| Back to top |
|
 |
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Fri Feb 05, 2010 3:10 am Post subject: |
|
|
Hi, can you post this :
| Code: |
# emerge --info
# lspci -n
# lsusb
# cat /etc/conf.d/net
|
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Fri Feb 05, 2010 6:36 pm Post subject: |
|
|
Can you plug your USB device and post this after that :
| Code: |
# lsusb
# dmesg | tail
|
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
| Posted: Fri Feb 05, 2010 9:28 pm Post subject: |
|
|
| d2_racing wrote: | Can you plug your USB device and post this after that :
| Code: |
# lsusb
# dmesg | tail
|
|
Sure, the usb device works fine, the internal PCI device does not.
lsusb:
http://pastebin.com/d2476c422
dmesg | tail:
http://pastebin.com/d29bb192f
Ok. |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
| Posted: Sat Feb 06, 2010 8:13 pm Post subject: |
|
|
| Help? |
|
| Back to top |
|
|
Zeerak
Apprentice
Joined: 27 Nov 2006
Posts: 239
Location: Aalborg, Denmark
|
| Posted: Sat Feb 06, 2010 10:41 pm Post subject: |
|
|
Could you post the various things to pastebin again? The links have expired. Also your wpa_supplicant.conf might be an idea 
_________________
Einstein was a great man, but he got one thing wrong with his theory of relativity. E= MC hammer. As far as logic goes, this is flawed, but as a show of wit, you can't touch this |
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Sat Feb 06, 2010 11:31 pm Post subject: |
|
|
In fact, all yours files are gone.
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
| Posted: Sun Feb 07, 2010 12:00 am Post subject: |
|
|
| d2_racing wrote: | | In fact, all yours files are gone. |
Alright. They are indeed gone. Let me post them again.
dmesg | tail:
| Code: |
[ 2066.937397] usb 1-4: link qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.937743] usb 1-4: unlink qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.938497] usb 1-4: link qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.938852] usb 1-4: unlink qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.939139] usb 1-4: link qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.939481] usb 1-4: unlink qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.939778] usb 1-4: link qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.940123] usb 1-4: unlink qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.940418] usb 1-4: link qh0-00ff/f680d300 start 0 [2/0 us]
[ 2066.940852] usb 1-4: unlink qh0-00ff/f680d300 start 0 [2/0 us]
|
lsusb:
| Code: |
Bus 001 Device 004: ID 0ace:1215 ZyDAS WLA-54L 802.11bg
Bus 001 Device 002: ID 093a:2700 Pixart Imaging, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
|
|
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Sun Feb 07, 2010 5:22 am Post subject: |
|
|
Hi, can you post this :
| Code: |
# cd /usr/src/linux
# cat .config | grep -i CONFIG_ZD1211RW
# lsmod
|
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Sun Feb 07, 2010 5:22 am Post subject: |
|
|
Post your /etc/conf.d/net and your /etc/wpa_supplicant/wpa_supplicant.conf too.
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
| Posted: Sun Feb 07, 2010 2:13 pm Post subject: |
|
|
1st:
| Code: | CONFIG_ZD1211RW=y
# CONFIG_ZD1211RW_DEBUG is not set |
2nd:
| Code: | Module Size Used by
gspca_main 18848 0
snd_hda_codec_realtek 184224 1
snd_hda_intel 22796 0
snd_hda_codec 49096 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6184 1 snd_hda_codec
|
Most of my features are built in the kernel, rather than being modules. I just find it more convenient.
wpa_supplicant:
| Code: |
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
ssid="linksys"
#psk="jeanette"
psk=81374e9bb9bd2c373d6b4554653514c5be4232f9df9ab5dcf3a8208ddc39c195
}
|
/etc/conf.d/net:
| Code: |
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).
modules=( "wpa_supplicant" )
wpa_supplicant_eth0="-Dwext"
|
|
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Sun Feb 07, 2010 3:52 pm Post subject: |
|
|
Ok, can you post this :
| Code: |
# ifconfig -a
# iwconfig
# iwlist scan
# dmesg | tail
|
For the record, I use this for a wpa2 encryption router :
| Code: |
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
ap_scan=0
#update_config=1
network={
ssid="your_ssid"
psk="my_passphrase"
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
priority=5
}
|
Finally, this is my /etc/conf.d/net :
| Code: |
#WPA_SUPPLICANT
modules=( "wpa_supplicant" )
wpa_supplicant_wlan0="-Dwext"
config_wlan0=( "dhcp" )
|
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
Zeerak
Apprentice
Joined: 27 Nov 2006
Posts: 239
Location: Aalborg, Denmark
|
| Posted: Sun Feb 07, 2010 6:24 pm Post subject: |
|
|
Wouldn't the iwconfig and iwlist commands only work, if you have wireless-tools installed?
An alternative to iwlist scan is | Code: | | wpa_cli -> scan -> list |
_________________
Einstein was a great man, but he got one thing wrong with his theory of relativity. E= MC hammer. As far as logic goes, this is flawed, but as a show of wit, you can't touch this |
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Sun Feb 07, 2010 9:08 pm Post subject: |
|
|
Yes, it's part of wireless-tools, but you can have both on your box, I mean wireless-tools and wpa_supplicant.
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
| Posted: Mon Feb 08, 2010 8:04 am Post subject: |
|
|
Not using the usb now, I am using the internal wireless. The internal wireless does not work with WPA. The USB works just fine.
Anyway, I'm posting the results in order of which you asked for them:
| Code: |
eth0 Link encap:Ethernet HWaddr 00:24:8c:3b:0b:99
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:22:43:73:c7:e7
inet addr:192.168.1.108 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::222:43ff:fe73:c7e7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2821 errors:3 dropped:3065 overruns:0 frame:0
TX packets:2982 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2549505 (2.4 MiB) TX bytes:545592 (532.8 KiB)
Interrupt:18 Memory:f8048000-f8048100
|
| Code: | lo no wireless extensions.
eth0 no wireless extensions.
wlan0 802.11b/g link ESSID:"paws"
Mode:Managed Frequency=2.412 GHz Access Point: 00:22:6B:77:DA:F1
Bit Rate=54 Mb/s
Retry:on RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=75/100 Signal level=-43 dBm Noise level=-104 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
sit0 no wireless extensions.
|
| Code: |
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:23:97:7E:AB:B2
ESSID:"09FX08012325"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
Quality=70/100 Signal level=-46 dBm Noise level=-99 dBm
Extra: Last beacon: 45ms ago
Cell 02 - Address: 00:25:9C:0B:68:74
ESSID:"Amelia"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 11 6 9 12 18 24 36 48 54
Quality=42/100 Signal level=-66 dBm Noise level=-80 dBm
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Preauthentication Supported
Extra: Last beacon: 38ms ago
Cell 03 - Address: 00:0F:3D:63:A7:BC
ESSID:"82008"
Protocol:IEEE 802.11g
Mode:Master
Channel:8
Encryption key:off
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
Quality=43/100 Signal level=-65 dBm Noise level=-81 dBm
Extra: Last beacon: 41ms ago
Cell 04 - Address: 00:23:69:4D:AA:9D
ESSID:"Smiths"
Protocol:IEEE 802.11bg
Mode:Master
Channel:11
Encryption key:on
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
Quality=43/100 Signal level=-65 dBm Noise level=-81 dBm
Extra: Last beacon: 10ms ago
Cell 05 - Address: 00:22:6B:77:DA:F1
ESSID:"paws"
Protocol:IEEE 802.11bg
Mode:Master
Channel:1
Encryption key:off
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 11 9 12 18 24 36 48 54
Quality=75/100 Signal level=-43 dBm Noise level=-104 dBm
Extra: Last beacon: 117ms ago
Cell 06 - Address: 00:1F:90:F0:88:F3
ESSID:"PIOQ2"
Protocol:IEEE 802.11bg
Mode:Master
Channel:1
Encryption key:on
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 11 6 9 12 18 24 36 48 54
Quality=36/100 Signal level=-70 dBm Noise level=-76 dBm
Extra: Last beacon: 125ms ago
Cell 07 - Address: 00:1F:90:E8:AE:CB
ESSID:"FEXE1"
Protocol:IEEE 802.11bg
Mode:Master
Channel:1
Encryption key:on
Bit Rates:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 11 6 9 12 18 24 36 48 54
Quality=38/100 Signal level=-69 dBm Noise level=-77 dBm
Extra: Last beacon: 123ms ago
sit0 Interface doesn't support scanning.
|
| Code: |
[ 396.990996] r8180: Card successfully reset
[ 397.734193] r8180: WIRELESS_MODE_G
[ 397.734196]
[ 397.776332] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 398.074073] iwconfig used greatest stack depth: 5648 bytes left
[ 398.858746] Linking with paws: channel is 1
[ 398.882244] Associated successfully
[ 398.882249] Using G rates
[ 398.896312] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 408.907057] wlan0: no IPv6 routers present
|
Oh, and I'm not using the r8180 driver or card, it's actually an rtl8187se. |
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Mon Feb 08, 2010 12:53 pm Post subject: |
|
|
Hi, when you try to connect with your internal card, can you post this :
| Code: |
# dmesg | tail
# wpa_cli status
|
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
dragos240
Apprentice
Joined: 19 Apr 2009
Posts: 230
|
| Posted: Tue Feb 09, 2010 1:44 am Post subject: |
|
|
| d2_racing wrote: | Hi, when you try to connect with your internal card, can you post this :
| Code: |
# dmesg | tail
# wpa_cli status
|
|
dmesg | tail:
| Code: |
[ 221.451461] Associated successfully
[ 221.451468] Using G rates
[ 221.475796] ieee80211_crypt_tkip: could not allocate crypto API michael_mic
[ 221.517398] Linking with linksys: channel is 6
[ 237.875594] Linking with linksys: channel is 6
[ 237.917598] Linking with linksys: channel is 6
[ 237.935075] Associated successfully
[ 237.935082] Using G rates
[ 237.958440] ieee80211_crypt_tkip: could not allocate crypto API michael_mic
[ 238.000554] Linking with linksys: channel is 6
|
wpa_cli status:
| Code: |
Selected interface 'wlan0'
wpa_state=SCANNING
|
and I think you should see the output of me trying to connect to my network, the messages may be of some use to you:
| Code: |
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Trying to associate with 00:14:bf:1f:bb:79 (SSID='linksys' freq=2437 MHz)
Association request to the driver failed
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Associated with 00:14:bf:1f:bb:79
WPA: Failed to set PTK to the driver (alg=2 keylen=32 bssid=00:14:bf:1f:bb:79)
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Associated with 00:00:00:00:00:00
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-TERMINATING - signal 2 received
|
|
|
| Back to top |
|
|
d2_racing
Moderator
Joined: 25 Apr 2005
Posts: 12867
Location: Ste-Foy,Canada
|
| Posted: Tue Feb 09, 2010 3:35 am Post subject: |
|
|
Hi, I see this : | Code: | | ieee80211_crypt_tkip: could not allocate crypto API michael_mic |
Can you post this :
| Code: |
# cd /usr/src/linux
# cat .config | grep -i crypto
|
_________________
Sysadmin of Funtoo-Québec.org
Wiki
Signature
IRC on Freenode : #funtoo-quebec |
|
| Back to top |
|
|
|
Kernel & Hardware
