| View previous topic :: View next topic |
| Author |
Message |
matttah
Apprentice
Joined: 22 Jan 2005
Posts: 206
|
 Posted: Thu Feb 04, 2010 7:07 pm Post subject: lirc + serial irblaster:hardware does not support sending |
 |
|
I have a happauge pvr 350 with an IR reciever that is working fine. However I recently got an IR blaster(http://irblaster.info/) which I cannot get to work with lirc. I have modprobed the lirc_serial and setup /etc/serial.conf with:
| Code: | | /dev/ttyS0 uart none |
However when I run
| Code: |
$: irsend send_once DC50X 2
irsend: command failed: send_once DC50X 2
irsend: hardware does not support sending
|
I've also tried specifying the device to irsend with-d /dev/lircd1
Any ideas what I am doing wrong? |
|
| Back to top |
|
 |
destuxor
l33t
Joined: 01 Mar 2004
Posts: 803
Location: Honolulu, HI, USA
|
| Posted: Thu Jan 26, 2012 7:35 am Post subject: |
|
|
I realize this is an old thread, but matttah describes the same problem I'm having now. There are a few other threads that describe the same symptom but offer no viable solutions.
I have: | Code: | server ~ # dmesg| grep -i lirc
[ 8.422738] lirc_dev: IR Remote Control driver registered, major 61
[ 9.361235] lirc_serial: auto-detected active high receiver
[ 9.361240] lirc_dev: lirc_register_driver: sample_rate: 0
[ 9.383454] lirc_dev: lirc_register_driver: sample_rate: 0
[ 9.383508] lirc_sir: i/o port 0x03f8 already in use. |
| Code: | server ~ # lsmod
Module Size Used by
lirc_serial 7076 0
lirc_dev 9674 1 lirc_serial
scsi_wait_scan 483 0
xt_mark 817 0 |
And error: | Code: | server ~ # irsend SEND_ONCE Toshiba_CT-90287-TV power
irsend: command failed: SEND_ONCE Toshiba_CT-90287-TV power
irsend: hardware does not support sending |
I have the IR Blaster from http://irblaster.info I bought via Google Checkout.
Has anyone who has experienced this old problem found a solution?
(On a side note, this is my first post to f.g.o. in years! Tried Arch for a while but ultimately things didn't work out and I'm baaaack!) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
