| View previous topic :: View next topic |
| Author |
Message |
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 464
|
 Posted: Thu Jan 28, 2010 6:58 pm Post subject: Dvd drive ? |
 |
|
Hey i have a dvd drive in my machine which is connected through ide.
I was wondering how i configure this and get it working in my gentoo system ?
If anyone could help that would be great |
|
| Back to top |
|
 |
stobbsm
Guru
Joined: 23 May 2004
Posts: 452
|
| Posted: Thu Jan 28, 2010 8:00 pm Post subject: |
|
|
Do you have any hard drives connected to the same IDE bus that are working?
Does /dev/cdrom point to anything?
Chances are the device is already working. Were you looking for what kind of software to use to play a DVD?
Need a little more information.
_________________
Sysadmin of Ubuntu systems and servers....
Although my own server is gentoo.... |
|
| Back to top |
|
|
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 464
|
| Posted: Thu Jan 28, 2010 8:11 pm Post subject: |
|
|
| Ok man will post back when i get home later |
|
| Back to top |
|
|
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 464
|
| Posted: Mon Feb 08, 2010 12:26 am Post subject: |
|
|
My dvd is drive is ide and my hard drive is sata.
How do I check if /dev/cdrom points to anything ?
i was just looking to mount the dvd drive and also id use mplayer for dvds |
|
| Back to top |
|
|
RedSquirrel
Guru
Joined: 22 Apr 2008
Posts: 336
|
| Posted: Mon Feb 08, 2010 3:56 am Post subject: |
|
|
You might want to look at /dev/dvd* as well, since mplayer uses the /dev/dvd symbolic link by default. (That can be overridden with 'mplayer -dvd-device <device>' or added to mplayer's config file.)
If you only have one drive installed, those symbolic links should point to the same device. Depending on the type of device(s), you may have /dev/cdrw, /dev/dvdrw, etc. |
|
| Back to top |
|
|
r3tep
Tux's lil' helper
Joined: 10 Sep 2005
Posts: 108
|
| Posted: Mon Feb 08, 2010 7:18 am Post subject: |
|
|
You can check your kernelmessages:
If you got any informative output, run
and search for the output you grepped above.
Inside less you can search strings casesensitive
|
|
| Back to top |
|
|
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 464
|
| Posted: Mon Feb 08, 2010 12:07 pm Post subject: |
|
|
| Code: | localhost ~ # ls: cannot access /dev/cd*: No such file or directory
-bash: ls:: command not found
localhost ~ #
|
| Code: | localhost ~ # ls -l /dev/dvd*
ls: cannot access /dev/dvd*: No such file or directory
localhost ~ #
|
| Code: | [ 0.391041] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.391443] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.392050] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.392391] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.392572] TCP reno registered
[ 0.395056] NET: Registered protocol family 1
[ 0.396029] Machine check exception polling timer started.
[ 0.396819] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.397097] Scanning for low memory corruption every 60 seconds
[ 0.397507] audit: initializing netlink socket (disabled)
[ 0.397688] type=2000 audit(1265633491.397:1): initialized
[ 0.405983] highmem bounce pool size: 64 pages
[ 0.406157] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.408872] VFS: Disk quotas dquot_6.5.2
[ 0.409117] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.410147] NTFS driver 2.1.29 [Flags: R/W].
[ 0.410512] msgmni has been set to 1724
[ 0.410771] SELinux: Registering netfilter hooks
[ 0.411178] alg: No test for stdrng (krng)
[ 0.411431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.411705] io scheduler noop registered
[ 0.411870] io scheduler anticipatory registered
[ 0.412042] io scheduler deadline registered
[ 0.412264] io scheduler cfq registered (default)
[ 0.412446] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.412630] pci 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.412632] pci 0000:00:10.0: Performing full reset
[ 0.412648] pci 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.412649] pci 0000:00:10.1: Performing full reset
[ 0.412665] pci 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.412667] pci 0000:00:10.2: Performing full reset
[ 0.412682] pci 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.412684] pci 0000:00:10.3: Performing full reset
[ 0.412725] pci 0000:02:00.0: Boot video device
[ 0.412881] alloc irq_desc for 48 on cpu 0 node 0
[ 0.412883] alloc kstat_irqs on cpu 0 node 0
[ 0.412893] pcieport-driver 0000:00:02.0: irq 48 for MSI/MSI-X
[ 0.412911] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.413320] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 0.413360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.416258] Non-volatile memory driver v1.3
[ 0.416512] Linux agpgart interface v0.103
[ 0.416983] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.417261] ACPI: Power Button [PWRF]
[ 0.417497] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.417776] ACPI: Sleep Button [SLPB]
[ 0.418002] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.418280] ACPI: Power Button [PWRB]
[ 0.418877] processor ACPI_CPU:00: registered as cooling_device0
[ 0.419058] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 0.419628] processor ACPI_CPU:01: registered as cooling_device1
[ 0.419806] ACPI: Processor [CPU2] (supports 16 throttling states)
[ 0.420413] processor ACPI_CPU:02: registered as cooling_device2
[ 0.420595] ACPI: Processor [CPU3] (supports 16 throttling states)
[ 0.421235] processor ACPI_CPU:03: registered as cooling_device3
[ 0.421414] ACPI: Processor [CPU4] (supports 16 throttling states)
[ 0.425118] [drm] Initialized drm 1.1.0 20060810
[ 0.425348] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.669237] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.669895] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.671648] brd: module loaded
[ 0.672530] loop: module loaded
[ 0.672759] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.673052] Uniform Multi-Platform E-IDE driver
[ 0.673320] via82cxxx 0000:00:0f.1: VIA vt8237s (rev 00) IDE UDMA133
[ 0.673500] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x07)
[ 0.673707] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
[ 0.673982] ide0: BM-DMA at 0xfc00-0xfc07
[ 0.674156] ide1: BM-DMA at 0xfc08-0xfc0f
[ 0.674325] Probing IDE interface ide0...
[ 0.878143] Switched to high resolution mode on CPU 3
[ 0.878559] Switched to high resolution mode on CPU 1
[ 0.878610] Switched to high resolution mode on CPU 2
[ 0.878971] Switched to high resolution mode on CPU 0
[ 1.193423] Probing IDE interface ide1...
[ 1.712068] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.713905] ide1 at 0x170-0x177,0x376 on irq 15
[ 1.714262] ide-gd driver 1.18
[ 1.714558] Driver 'sd' needs updating - please use bus_type methods
[ 1.714771] Driver 'sr' needs updating - please use bus_type methods
[ 1.715123] sata_via 0000:00:0f.0: version 2.4
[ 1.715133] alloc irq_desc for 21 on cpu 0 node 0
[ 1.715135] alloc kstat_irqs on cpu 0 node 0
[ 1.715140] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.715341] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.715571] scsi0 : sata_via
[ 1.715864] scsi1 : sata_via
[ 1.717353] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21
[ 1.717541] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21
[ 1.718095] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 1.718274] Copyright (c) 1999-2006 Intel Corporation.
[ 1.718495] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.718672] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.718931] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.719109] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.719409] sky2 driver version 1.22
[ 1.719624] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.719812] alloc irq_desc for 23 on cpu 0 node 0
[ 1.719814] alloc kstat_irqs on cpu 0 node 0
[ 1.719818] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.720318] eth0: VIA Rhine II at 0x1c000, 00:19:66:38:0d:83, IRQ 23.
[ 1.721238] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 1.721715] console [netcon0] enabled
[ 1.721879] netconsole: network logging started
[ 1.722204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.722387] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 1.722405] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.722598] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.722826] drivers/usb/core/inode.c: creating file 'devices'
[ 1.722829] drivers/usb/core/inode.c: creating file '001'
[ 1.722880] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.723157] ehci_hcd 0000:00:10.4: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 1.723161] ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024
[ 1.723174] ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.723187] ehci_hcd 0000:00:10.4: debug port 1
[ 1.723358] ehci_hcd 0000:00:10.4: MWI active
[ 1.723359] ehci_hcd 0000:00:10.4: supports USB remote wakeup
[ 1.723365] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf5fffc00
[ 1.723545] ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.723551] ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 1.729008] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.729204] usb usb1: default language 0x0409
[ 1.729210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.729394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.729665] usb usb1: Product: EHCI Host Controller
[ 1.729836] usb usb1: Manufacturer: Linux 2.6.30-gentoo-r6 ehci_hcd
[ 1.730014] usb usb1: SerialNumber: 0000:00:10.4
[ 1.730212] usb usb1: uevent
[ 1.730254] usb usb1: usb_probe_device
[ 1.730256] usb usb1: configuration #1 chosen from 1 choice
[ 1.730437] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.730450] usb 1-0:1.0: uevent
[ 1.730488] hub 1-0:1.0: usb_probe_interface
[ 1.730491] hub 1-0:1.0: usb_probe_interface - got id
[ 1.730493] hub 1-0:1.0: USB hub found
[ 1.730662] hub 1-0:1.0: 8 ports detected
[ 1.730827] hub 1-0:1.0: standalone hub
[ 1.730829] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.730831] hub 1-0:1.0: individual port over-current protection
[ 1.730833] hub 1-0:1.0: power on to power good time: 20ms
[ 1.730836] hub 1-0:1.0: local power source is good
[ 1.730838] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.730939] drivers/usb/core/inode.c: creating file '001'
[ 1.731032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.731211] ohci_hcd: block sizes: ed 64 td 64
[ 1.731255] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.731463] alloc irq_desc for 20 on cpu 0 node 0
[ 1.731465] alloc kstat_irqs on cpu 0 node 0
[ 1.731468] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.731654] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.731869] drivers/usb/core/inode.c: creating file '002'
[ 1.731922] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.732197] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.732370] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.732372] uhci_hcd 0000:00:10.0: Performing full reset
[ 1.732387] uhci_hcd 0000:00:10.0: supports USB remote wakeup
[ 1.732400] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c480
[ 1.732595] usb usb2: default language 0x0409
[ 1.732601] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.732782] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.733053] usb usb2: Product: UHCI Host Controller
[ 1.733223] usb usb2: Manufacturer: Linux 2.6.30-gentoo-r6 uhci_hcd
[ 1.733406] usb usb2: SerialNumber: 0000:00:10.0
[ 1.733601] usb usb2: uevent
[ 1.733638] usb usb2: usb_probe_device
[ 1.733641] usb usb2: configuration #1 chosen from 1 choice
[ 1.733818] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.733830] usb 2-0:1.0: uevent
[ 1.733868] hub 2-0:1.0: usb_probe_interface
[ 1.733870] hub 2-0:1.0: usb_probe_interface - got id
[ 1.733872] hub 2-0:1.0: USB hub found
[ 1.734040] hub 2-0:1.0: 2 ports detected
[ 1.734206] hub 2-0:1.0: standalone hub
[ 1.734207] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.734209] hub 2-0:1.0: individual port over-current protection
[ 1.734211] hub 2-0:1.0: power on to power good time: 2ms
[ 1.734214] hub 2-0:1.0: local power source is good
[ 1.734216] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.734272] drivers/usb/core/inode.c: creating file '001'
[ 1.734338] alloc irq_desc for 22 on cpu 0 node 0
[ 1.734340] alloc kstat_irqs on cpu 0 node 0
[ 1.734344] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.734533] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.734748] drivers/usb/core/inode.c: creating file '003'
[ 1.734797] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.735072] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.735244] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.735246] uhci_hcd 0000:00:10.1: Performing full reset
[ 1.735258] uhci_hcd 0000:00:10.1: supports USB remote wakeup
[ 1.735271] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[ 1.735471] usb usb3: default language 0x0409
[ 1.735477] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.735658] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.735929] usb usb3: Product: UHCI Host Controller
[ 1.736099] usb usb3: Manufacturer: Linux 2.6.30-gentoo-r6 uhci_hcd
[ 1.736277] usb usb3: SerialNumber: 0000:00:10.1
[ 1.736480] usb usb3: uevent
[ 1.736519] usb usb3: usb_probe_device
[ 1.736521] usb usb3: configuration #1 chosen from 1 choice
[ 1.736699] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.736711] usb 3-0:1.0: uevent
[ 1.736748] hub 3-0:1.0: usb_probe_interface
[ 1.736750] hub 3-0:1.0: usb_probe_interface - got id
[ 1.736752] hub 3-0:1.0: USB hub found
[ 1.736919] hub 3-0:1.0: 2 ports detected
[ 1.737084] hub 3-0:1.0: standalone hub
[ 1.737086] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.737087] hub 3-0:1.0: individual port over-current protection
[ 1.737089] hub 3-0:1.0: power on to power good time: 2ms
[ 1.737093] hub 3-0:1.0: local power source is good
[ 1.737095] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.737150] drivers/usb/core/inode.c: creating file '001'
[ 1.737215] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.737405] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.737619] drivers/usb/core/inode.c: creating file '004'
[ 1.737670] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.737945] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.738118] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.738120] uhci_hcd 0000:00:10.2: Performing full reset
[ 1.738132] uhci_hcd 0000:00:10.2: supports USB remote wakeup
[ 1.738137] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880
[ 1.738332] usb usb4: default language 0x0409
[ 1.738337] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.738523] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.738793] usb usb4: Product: UHCI Host Controller
[ 1.738963] usb usb4: Manufacturer: Linux 2.6.30-gentoo-r6 uhci_hcd
[ 1.739141] usb usb4: SerialNumber: 0000:00:10.2
[ 1.739337] usb usb4: uevent
[ 1.739378] usb usb4: usb_probe_device
[ 1.739381] usb usb4: configuration #1 chosen from 1 choice
[ 1.739558] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.739570] usb 4-0:1.0: uevent
[ 1.739609] hub 4-0:1.0: usb_probe_interface
[ 1.739611] hub 4-0:1.0: usb_probe_interface - got id
[ 1.739613] hub 4-0:1.0: USB hub found
[ 1.739781] hub 4-0:1.0: 2 ports detected
[ 1.739946] hub 4-0:1.0: standalone hub
[ 1.739947] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.739949] hub 4-0:1.0: individual port over-current protection
[ 1.739951] hub 4-0:1.0: power on to power good time: 2ms
[ 1.739955] hub 4-0:1.0: local power source is good
[ 1.739956] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.740014] drivers/usb/core/inode.c: creating file '001'
[ 1.740081] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.740268] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.740490] drivers/usb/core/inode.c: creating file '005'
[ 1.740541] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.740816] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.740988] uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.740990] uhci_hcd 0000:00:10.3: Performing full reset
[ 1.741002] uhci_hcd 0000:00:10.3: supports USB remote wakeup
[ 1.741015] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00
[ 1.741210] usb usb5: default language 0x0409
[ 1.741216] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.741401] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.741672] usb usb5: Product: UHCI Host Controller
[ 1.741842] usb usb5: Manufacturer: Linux 2.6.30-gentoo-r6 uhci_hcd
[ 1.742020] usb usb5: SerialNumber: 0000:00:10.3
[ 1.742222] usb usb5: uevent
[ 1.742262] usb usb5: usb_probe_device
[ 1.742264] usb usb5: configuration #1 chosen from 1 choice
[ 1.742444] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.742456] usb 5-0:1.0: uevent
[ 1.742493] hub 5-0:1.0: usb_probe_interface
[ 1.742495] hub 5-0:1.0: usb_probe_interface - got id
[ 1.742497] hub 5-0:1.0: USB hub found
[ 1.742664] hub 5-0:1.0: 2 ports detected
[ 1.742829] hub 5-0:1.0: standalone hub
[ 1.742831] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.742833] hub 5-0:1.0: individual port over-current protection
[ 1.742835] hub 5-0:1.0: power on to power good time: 2ms
[ 1.742838] hub 5-0:1.0: local power source is good
[ 1.742840] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.742894] drivers/usb/core/inode.c: creating file '001'
[ 1.743034] usbcore: registered new interface driver usblp
[ 1.743208] Initializing USB Mass Storage driver...
[ 1.743431] usbcore: registered new interface driver usb-storage
[ 1.743608] USB Mass Storage support registered.
[ 1.743828] usbcore: registered new interface driver libusual
[ 1.744094] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.744272] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.744708] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.744989] mice: PS/2 mouse device common for all mice
[ 1.745455] rtc_cmos 00:07: RTC can wake from S4
[ 1.745675] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.745884] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.746292] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.746701] cpuidle: using governor ladder
[ 1.746867] cpuidle: using governor menu
[ 1.747964] usbcore: registered new interface driver hiddev
[ 1.748184] usbcore: registered new interface driver usbhid
[ 1.748359] usbhid: v2.6:USB HID core driver
[ 1.748658] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 1.749119] alloc irq_desc for 17 on cpu 0 node 0
[ 1.749121] alloc kstat_irqs on cpu 0 node 0
[ 1.749125] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.749419] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 1.749422] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 1.764116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.783103] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 1.783460] Too many connections
[ 1.783662] hda_codec: formats == 0 (nid=0x2, val=0x11, ovrd=1, streams=0x211)
[ 1.783939] hda_codec: cannot attach PCM stream 0 for codec #0
[ 1.784140] hda_codec: rates == 0 (nid=0x9, val=0x400000, ovrd=1)
[ 1.784319] hda_codec: cannot attach PCM stream 2 for codec #0
[ 1.785893] Too many connections
[ 1.786337] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 1.786620] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 1.786957] hda_codec: num_steps = 0 for NID=0xb (ctl = Line Playback Volume)
[ 1.787167] hda_codec: num_steps = 0 for NID=0xb (ctl = Mic Playback Volume)
[ 1.787368] hda_codec: num_steps = 0 for NID=0xb (ctl = CD Playback Volume)
[ 1.787759] ALSA device list:
[ 1.787918] #0: HDA VIA VT82xx at 0xfebfc000 irq 17
[ 1.788118] Netfilter messages via NETLINK v0.30.
[ 1.788304] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.788683] ctnetlink v0.93: registering with nfnetlink.
[ 1.789389] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.789578] TCP cubic registered
[ 1.789739] Initializing XFRM netlink socket
[ 1.790173] NET: Registered protocol family 10
[ 1.791206] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.791431] IPv6 over IPv4 tunneling driver
[ 1.792154] NET: Registered protocol family 17
[ 1.792529] RPC: Registered udp transport module.
[ 1.792699] RPC: Registered tcp transport module.
[ 1.792893] Using IPI No-Shortcut mode
[ 1.793198] PM: Resume from disk failed.
[ 1.793212] registered taskstats version 1
[ 1.793483] Magic number: 14:186:885
[ 1.830017] ehci_hcd 0000:00:10.4: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 1.830020] hub 1-0:1.0: port 2: status 0501 change 0001
[ 1.834009] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00
[ 1.834018] uhci_hcd 0000:00:10.0: port 2 portsc 01aa,00
[ 1.836008] uhci_hcd 0000:00:10.1: port 1 portsc 008a,00
[ 1.836016] uhci_hcd 0000:00:10.1: port 2 portsc 008a,00
[ 1.839008] uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
[ 1.839016] uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
[ 1.842008] uhci_hcd 0000:00:10.3: port 1 portsc 008a,00
[ 1.842016] uhci_hcd 0000:00:10.3: port 2 portsc 008a,00
[ 1.918026] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 1.930018] hub 1-0:1.0: state 7 ports 8 chg 0004 evt 0000
[ 1.930023] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 1.930028] ehci_hcd 0000:00:10.4: port 2 low speed --> companion
[ 1.981012] ehci_hcd 0000:00:10.4: GetStatus port 2 status 003402 POWER OWNER sig=k CSC
[ 1.981025] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004
[ 1.981030] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 1.981035] uhci_hcd 0000:00:10.0: port 2 portsc 01a3,00
[ 1.981040] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 2.085013] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 2.091327] ata1.00: ATA-8: SAMSUNG HD403LJ, CT100-12, max UDMA7
[ 2.091505] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.094340] ata1.00: configured for UDMA/133
[ 2.094594] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5
[ 2.095122] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.095137] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
[ 2.095149] sd 0:0:0:0: [sda] Write Protect is off
[ 2.095152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.095170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095248] sda: sda1 sda2 sda3
[ 2.100126] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.187015] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 2.297041] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.308001] md: Waiting for all devices to be available before autodetect
[ 2.309787] md: If you don't use raid, use raid=noautodetect
[ 2.310071] md: Autodetecting RAID arrays.
[ 2.310238] md: Scanned 0 and added 0 devices.
[ 2.310408] md: autorun ...
[ 2.310567] md: ... autorun DONE.
[ 2.326711] usb 2-2: skipped 1 descriptor after interface
[ 2.331710] usb 2-2: default language 0x0409
[ 2.337849] kjournald starting. Commit interval 5 seconds
[ 2.337857] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.337869] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 2.338383] Freeing unused kernel memory: 360k freed
[ 2.338664] Write protecting the kernel text: 4616k
[ 2.338873] Write protecting the kernel read-only data: 2116k
[ 2.346712] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 2.346893] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.347079] usb 2-2: Product: USB OPTICAL MOUSE
[ 2.347247] usb 2-2: Manufacturer: PIXART
[ 2.347448] usb 2-2: uevent
[ 2.517347] usb 2-2: usb_probe_device
[ 2.517350] usb 2-2: configuration #1 chosen from 1 choice
[ 2.529748] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 2.529762] usb 2-2:1.0: uevent
[ 2.529851] usbhid 2-2:1.0: usb_probe_interface
[ 2.529854] usbhid 2-2:1.0: usb_probe_interface - got id
[ 2.544011] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5
[ 2.544544] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:10.0-2/input0
[ 2.544917] drivers/usb/core/inode.c: creating file '002'
[ 2.544996] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.545000] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.545007] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.545010] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 2.954016] usb usb3: suspend_rh (auto-stop)
[ 2.954032] usb usb4: suspend_rh (auto-stop)
[ 2.954047] usb usb5: suspend_rh (auto-stop)
[ 3.057511] consoletype used greatest stack depth: 6820 bytes left
[ 3.115893] uname used greatest stack depth: 6756 bytes left
[ 3.139752] stty used greatest stack depth: 6396 bytes left
[ 3.348458] grep used greatest stack depth: 6304 bytes left
[ 3.415085] rm used greatest stack depth: 6184 bytes left
[ 3.430897] hotplug used greatest stack depth: 6088 bytes left
[ 3.946230] udev: starting version 141
[ 3.959807] usb usb2: uevent
[ 3.959823] usb 2-0:1.0: uevent
[ 3.959854] usb 2-2: uevent
[ 3.959870] usb 2-2:1.0: uevent
[ 3.960042] usb usb3: uevent
[ 3.960057] usb 3-0:1.0: uevent
[ 3.960131] usb usb4: uevent
[ 3.960145] usb 4-0:1.0: uevent
[ 3.960220] usb usb5: uevent
[ 3.960236] usb 5-0:1.0: uevent
[ 3.960314] usb usb1: uevent
[ 3.960329] usb 1-0:1.0: uevent
[ 4.039372] usb 2-2:1.0: uevent
[ 4.039463] usb 2-2: uevent
[ 4.042313] usb 2-2:1.0: uevent
[ 4.042393] usb 2-2: uevent
[ 4.602308] nvidia: module license 'NVIDIA' taints kernel.
[ 4.602312] Disabling lock debugging due to kernel taint
[ 4.695385] hub 1-0:1.0: hub_suspend
[ 4.695393] usb usb1: bus auto-suspend
[ 4.695396] ehci_hcd 0000:00:10.4: suspend root hub
[ 4.704009] hub 3-0:1.0: hub_suspend
[ 4.704012] usb usb3: bus auto-suspend
[ 4.704014] usb usb3: suspend_rh
[ 4.704026] hub 4-0:1.0: hub_suspend
[ 4.704029] usb usb4: bus auto-suspend
[ 4.704031] usb usb4: suspend_rh
[ 4.704042] hub 5-0:1.0: hub_suspend
[ 4.704045] usb usb5: bus auto-suspend
[ 4.704047] usb usb5: suspend_rh
[ 4.856873] alloc irq_desc for 24 on cpu 0 node 0
[ 4.856875] alloc kstat_irqs on cpu 0 node 0
[ 4.856882] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 4.856889] nvidia 0000:02:00.0: setting latency timer to 64
[ 4.856986] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.60 Tue May 12 12:12:11 PDT 2009
[ 5.349391] EXT3 FS on sda3, internal journal
[ 5.803307] Adding 498004k swap on /dev/sda2. Priority:-1 extents:1 across:498004k
[ 8.540468] snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
[ 8.541130] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.547270] snd: module is already loaded
[ 8.556617] snd_timer: module is already loaded
[ 8.567111] snd_pcm: module is already loaded
[ 8.568232] snd_hwdep: exports duplicate symbol snd_hwdep_new (owned by kernel)
[ 8.578240] snd_hda_codec: exports duplicate symbol snd_hda_parse_generic_codec (owned by kernel)
[ 8.578732] snd_hda_intel: module is already loaded
[ 8.579299] snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
[ 8.579774] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.579900] snd: module is already loaded
[ 8.579970] snd_timer: module is already loaded
[ 8.580110] snd_pcm: module is already loaded
[ 8.580911] snd_hwdep: exports duplicate symbol snd_hwdep_new (owned by kernel)
[ 8.582394] snd_hda_codec: exports duplicate symbol snd_hda_parse_generic_codec (owned by kernel)
[ 8.582480] snd_hda_intel: module is already loaded
[ 8.587218] snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
[ 8.587706] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.587855] snd: module is already loaded
[ 8.587931] snd_timer: module is already loaded
[ 8.588126] snd_pcm: module is already loaded
[ 8.588945] snd_hwdep: exports duplicate symbol snd_hwdep_new (owned by kernel)
[ 8.590433] snd_hda_codec: exports duplicate symbol snd_hda_parse_generic_codec (owned by kernel)
[ 8.590524] snd_hda_intel: module is already loaded
[ 8.591082] snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
[ 8.591560] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.591686] snd: module is already loaded
[ 8.591757] snd_timer: module is already loaded
[ 8.591888] snd_pcm: module is already loaded
[ 8.592694] snd_hwdep: exports duplicate symbol snd_hwdep_new (owned by kernel)
[ 8.594175] snd_hda_codec: exports duplicate symbol snd_hda_parse_generic_codec (owned by kernel)
[ 8.594266] snd_hda_intel: module is already loaded
[ 8.599047] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.599187] snd: module is already loaded
[ 8.600574] snd_mixer_oss: exports duplicate symbol snd_mixer_oss_ioctl_card (owned by kernel)
[ 8.601080] snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
[ 8.601172] snd_timer: module is already loaded
[ 8.601365] snd_pcm: module is already loaded
[ 8.605425] snd_pcm_oss: module is already loaded
[ 8.610775] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.610909] snd: module is already loaded
[ 8.611827] snd_mixer_oss: exports duplicate symbol snd_mixer_oss_ioctl_card (owned by kernel)
[ 8.616851] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 8.616995] snd: module is already loaded
[ 8.620927] snd_seq_device: exports duplicate symbol snd_seq_autoload_unlock (owned by kernel)
[ 8.621034] snd_timer: module is already loaded
[ 8.628166] snd_seq: module is already loaded
[ 8.819408] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 8.877251] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 8.877615] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 8.878007] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 10.389461] usb usb2: uevent
[ 10.389511] usb 2-0:1.0: uevent
[ 10.389597] usb 2-2: uevent
[ 10.389647] usb 2-2:1.0: uevent
[ 10.390188] usb usb3: uevent
[ 10.390237] usb 3-0:1.0: uevent
[ 10.390449] usb usb4: uevent
[ 10.390497] usb 4-0:1.0: uevent
[ 10.390712] usb usb5: uevent
[ 10.390760] usb 5-0:1.0: uevent
[ 10.390971] usb usb1: uevent
[ 10.391020] usb 1-0:1.0: uevent
[ 11.577937] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 22.046060] eth0: no IPv6 routers present
[ 172.926580] IRQ 24/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 174.877021] uhci_hcd 0000:00:10.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[ 184.131645] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 184.250801] xscreensaver used greatest stack depth: 5884 bytes left
[ 317.320264] firefox used greatest stack depth: 5764 bytes left
|
Is this correct >? |
|
| Back to top |
|
|
RedSquirrel
Guru
Joined: 22 Apr 2008
Posts: 336
|
| Posted: Mon Feb 08, 2010 4:08 pm Post subject: |
|
|
| It appears no DVD/CD drives were detected. Assuming the drive is connected properly, you might be missing something in your kernel configuration. Perhaps you could post your kernel config (/usr/src/linux/.config) at http://pastebin.com/. |
|
| Back to top |
|
|
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 464
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
