Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
problem with growisofs is too slow [Half Solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Multimedia
View previous topic :: View next topic  
Author Message
Biro
n00b
n00b


Joined: 07 May 2006
Posts: 64

PostPosted: Wed Jan 13, 2010 8:36 pm    Post subject: problem with growisofs is too slow [Half Solved] Reply with quote

Hi people
my dvdrw:

    Code:
     cdrecord  -scanbus
    Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2009 Jörg Schilling
    Linux sg driver version: 3.5.34
    Using libscg version 'schily-0.9'.
    scsibus0:
            0,0,0     0) 'ATA     ' 'WDC WD5000AAKS-0' '05.0' Disk
            0,1,0     1) *
            0,2,0     2) *
            0,3,0     3) *
            0,4,0     4) *
            0,5,0     5) *
            0,6,0     6) *
            0,7,0     7) *
    scsibus1:
            1,0,0   100) 'HL-DT-ST' 'DVDRAM GH22NS50 ' 'TN02' Removable CD-ROM
            1,1,0   101) *
            1,2,0   102) *
            1,3,0   103) *
            1,4,0   104) *
            1,5,0   105) *
            1,6,0   106) *
            1,7,0   107) *





It's a LG sata
When i start to burn a dvd it's to slow, for example:
Code:

growisofs -Z /dev/cdrom   -R -J /home/xxxxxxxxx.data
Executing 'mkisofs -R -J /home/xxxxxxxxx.data builtin_dd of=/dev/cdrom obs=32k seek=0'
  1.40% done, estimate finish Wed Jan 13 21:04:08 2010
  2.79% done, estimate finish Wed Jan 13 21:04:08 2010
  4.19% done, estimate finish Wed Jan 13 21:04:08 2010
/dev/cdrom: "Current Write Speed" is 4.1x1352KBps.
  5.58% done, estimate finish Wed Jan 13 21:18:45 2010
  6.98% done, estimate finish Wed Jan 13 21:28:44 2010
  8.37% done, estimate finish Wed Jan 13 21:36:46 2010
  9.77% done, estimate finish Wed Jan 13 21:42:01 2010
 11.16% done, estimate finish Wed Jan 13 21:46:05 2010
 12.56% done, estimate finish Wed Jan 13 21:49:23 2010
 13.95% done, estimate finish Wed Jan 13 21:51:40 2010
 15.35% done, estimate finish Wed Jan 13 21:53:33 2010
 16.74% done, estimate finish Wed Jan 13 21:55:12 2010
 18.14% done, estimate finish Wed Jan 13 21:56:31 2010
 19.53% done, estimate finish Wed Jan 13 21:57:32 2010
 20.93% done, estimate finish Wed Jan 13 21:58:27 2010
 22.32% done, estimate finish Wed Jan 13 21:59:18 2010
 23.71% done, estimate finish Wed Jan 13 22:00:00 2010
 25.11% done, estimate finish Wed Jan 13 22:00:40 2010
 26.50% done, estimate finish Wed Jan 13 22:01:13 2010


I also try to burn with cdrecord:
Code:

cdrecord -v speed=4 dev=1,0,0  cdimage.raw
cdrecord: No write mode specified.
cdrecord: Asuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2009 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH22NS50 '
Revision       : 'TN02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+RW
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW (current)
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1048576 = 1024 KB
Drive pbuf size: 1966080 = 1920 KB
Drive DMA Speed: 17203 kB/s 97x CD 12x DVD 3x BD
FIFO size      : 4194304 = 4096 KB
Track 01: data   149 MB       
Total size:      149 MB = 76745 sectors
Current Secsize: 2048
Trying to clear drive status.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 2218359
Reducing transfer size from 64512 to 32768 bytes.
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 02:  149 of  149 MB written (fifo 100%) [buf   6%]   0.1x.
Track 02: Total bytes read/written: 157173760/157173760 (76745 sectors).
Writing  time:  928.926s
Average write speed   0.1x.
Min drive buffer fill was 0%
Total of 64 possible drive buffer underruns predicted.
Fixating...
Fixating time:   19.907s
cdrecord: fifo had 4797 puts and 4797 gets.
cdrecord: fifo was 0 times empty and 2146 times full, min fill was 95%.


I want to mark that:

Average write speed 0.1x.

What I can do?
My dvdr LG it's broken?

(Yes my english it's wrong, sorry me)
_________________
Unix e' user friendly, solo decide lui con chi esserlo!


Last edited by Biro on Thu Jan 14, 2010 8:29 pm; edited 1 time in total
Back to top
View user's profile Send private message
Biro
n00b
n00b


Joined: 07 May 2006
Posts: 64

PostPosted: Thu Jan 14, 2010 8:29 pm    Post subject: Reply with quote

I take a LG DVDRAM GH20NS10.
Now it's all ok
Bye people, and the lesson is:

Don't buy LG GH22NS50

Have a nice week ( why only a day?)
_________________
Unix e' user friendly, solo decide lui con chi esserlo!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Multimedia All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum