hibernate-script problem with hostap_plx

[brain salad surgery]

when trying hibernate-ram, hostap_plx is giving troubles
and hangs the system. Tried with hostap_plx in the kernel
and as a module (with unloadmodules hostap_plx in hibernate.conf)

dmesg gives:

ACPI: Waking up from system sleep state S3
ACPI: Unable to turn cooling device [f7834900] 'off'
HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfdff8004)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport-driver 0000:00:1c.1: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x109)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xfdfff000)
pci 0000:00:1e.0: setting latency timer to 64
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x8 (was 0xf001, writing 0xfa01)
PIIX_IDE 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880005, writing 0x2800005)
PIIX_IDE 0000:00:1f.1: setting latency timer to 64
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: setting latency timer to 64
r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfdeff004)
r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xee01)
r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
r8169 0000:02:00.0: PME# disabled
hostap_plx 0000:03:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
hostap_plx 0000:03:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ath5k_pci 0000:03:02.0: restoring config space at offset 0x1 (was 0x2900002, writing 0x2900006)
r8169: lan0: link down
ath5k_pci 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath5k_pci 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
serial 00:08: activated
parport_pc 00:0a: activated
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
sd 0:0:0:0: [sda] Starting disk
ata1: link is slow to respond, please be patient (ready=0)
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-4: reset high speed USB device using ehci_hcd and address 2
Restarting tasks ... <3>hub 1-0:1.0: over-current change on port 4
done.
logips2pp: Detected unknown logitech mouse model 62
wifi0: hfa384x_cmd: entry still in list? (entry=f0794740, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=f0794740, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=0004 INTEN=0034)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd: entry still in list? (entry=f07eeb00, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=f07eeb00, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=0034 INTEN=0034)
wifi0: interrupt delivery does not seem to work
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd: entry still in list? (entry=f0794740, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=f0794740, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=0034 INTEN=0034)
wifi0: interrupt delivery does not seem to work
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd: entry still in list? (entry=f0794740, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=f0794740, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=0036 INTEN=0034)
wifi0: interrupt delivery does not seem to work
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)