View previous topic :: View next topic |
Author |
Message |
comprookie2000 Retired Dev
Joined: 25 Jul 2004 Posts: 925 Location: Sun City Center, Florida
|
Posted: Tue Sep 29, 2009 10:09 am Post subject: |
|
|
ArneBab,
Try to boot again to the command line. Then get a default xorg.conf
Go ahead and move that and rename it.
Code: |
cp /root/xorg.conf.new /etc/X11
cd /etc/X11
cp xorg.conf.new xorg.conf
|
edit it and remove the keyboard and mouse sections plus the module references like this one;
http://dwabbott.com/gentoo-ten/intel_fix/xorg.conf
Then start kdm
Code: |
/etc/init.d/xdm start
|
any luck? _________________ http://dev.gentoo.org/~dabbott/ |
|
Back to top |
|
|
ArneBab Guru
Joined: 24 Jan 2006 Posts: 429 Location: Graben-Neudorf, Germany
|
Posted: Tue Sep 29, 2009 10:18 am Post subject: |
|
|
likewhoa wrote: | ArneBab I will look into this today, I had others test with ATI and it worked but since we are using xorg-server-1.6 and no generated xorg.conf some may have issues like you, but xorg should work for most. |
Many thanks! _________________ Being unpolitical means being political without realizing it. - Arne Babenhauserheide ( http://draketo.de )
pkgcore: So fast that it feels unreal - by doing only what is needed. |
|
Back to top |
|
|
disi Veteran
Joined: 28 Nov 2003 Posts: 1354 Location: Out There ...
|
Posted: Tue Sep 29, 2009 10:22 am Post subject: |
|
|
Could you not use the generic uvesafb for example? Just run X on fbdev and it should work on nearly any hardware...
I do use it on my laptop for quiet a while now, as long as I do not play 3D games or have extreme screensaver it's OK. _________________ Gentoo on Uptime Project - Larry is a cow |
|
Back to top |
|
|
ArneBab Guru
Joined: 24 Jan 2006 Posts: 429 Location: Graben-Neudorf, Germany
|
Posted: Tue Sep 29, 2009 11:06 am Post subject: |
|
|
comprookie2000 wrote: | any luck? |
I'll test it as soon as my revdep-rebuild is finished _________________ Being unpolitical means being political without realizing it. - Arne Babenhauserheide ( http://draketo.de )
pkgcore: So fast that it feels unreal - by doing only what is needed. |
|
Back to top |
|
|
ArneBab Guru
Joined: 24 Jan 2006 Posts: 429 Location: Graben-Neudorf, Germany
|
Posted: Tue Sep 29, 2009 12:17 pm Post subject: |
|
|
ArneBab wrote: | comprookie2000 wrote: | any luck? |
I'll test it as soon as my revdep-rebuild is finished |
Sadly it didn't work.
My handedited xorg.conf:
Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV515 [Radeon X1300]"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
the xorg config shell output:
Code: |
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-hardened-r1 x86_64
Current Operating System: Linux livecd 2.6.30-gentoo-r5 #1 SMP Fri Sep 18 16:24:24 UTC 2009 x86_64
Build Date: 26 September 2009 02:04:46PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 29 12:00:44 2009
List of video drivers:
ast
ati
chips
cirrus
vmware
glint
i128
intel
mach64
mga
neomagic
nv
openchrome
r128
radeon
radeonhd
s3virge
savage
tdfx
trident
tseng
v4l
fbdev
vesa
(++) Using config file: "/root/xorg.conf.new"
Number of created screens does not match number of detected devices.
Configuration failed.
|
The xorg.conf.new produced by Xorg -configure
Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
Screen 6 "Screen6" RightOf "Screen5"
Screen 7 "Screen7" RightOf "Screen6"
Screen 8 "Screen8" RightOf "Screen7"
Screen 9 "Screen9" RightOf "Screen8"
Screen 10 "Screen10" RightOf "Screen9"
Screen 11 "Screen11" RightOf "Screen10"
Screen 12 "Screen12" RightOf "Screen11"
Screen 13 "Screen13" RightOf "Screen12"
Screen 14 "Screen14" RightOf "Screen13"
Screen 15 "Screen15" RightOf "Screen14"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor4"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor5"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor6"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor7"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor8"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor9"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor10"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor11"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor12"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor13"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor14"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor15"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV515 [Radeon X1300]"
BusID "PCI:5:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card1"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 Memory Controller"
BusID "PCI:0:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card2"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 ISA Bridge"
BusID "PCI:0:1:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card3"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 SMBus"
BusID "PCI:0:1:1"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card4"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 USB Controller"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card5"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 USB Controller"
BusID "PCI:0:2:1"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card6"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 AC'97 Audio Controller"
BusID "PCI:0:4:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card7"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 IDE"
BusID "PCI:0:6:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card8"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 Serial ATA Controller"
BusID "PCI:0:7:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card9"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 Serial ATA Controller"
BusID "PCI:0:8:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card10"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 PCI Bridge"
BusID "PCI:0:9:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card11"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 Ethernet Controller"
BusID "PCI:0:10:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card12"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 PCIE Bridge"
BusID "PCI:0:11:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card13"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 PCIE Bridge"
BusID "PCI:0:12:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card14"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 PCIE Bridge"
BusID "PCI:0:13:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card15"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "CK804 PCIE Bridge"
BusID "PCI:0:14:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Card3"
Monitor "Monitor3"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen4"
Device "Card4"
Monitor "Monitor4"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen5"
Device "Card5"
Monitor "Monitor5"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen6"
Device "Card6"
Monitor "Monitor6"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen7"
Device "Card7"
Monitor "Monitor7"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen8"
Device "Card8"
Monitor "Monitor8"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen9"
Device "Card9"
Monitor "Monitor9"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen10"
Device "Card10"
Monitor "Monitor10"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen11"
Device "Card11"
Monitor "Monitor11"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen12"
Device "Card12"
Monitor "Monitor12"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen13"
Device "Card13"
Monitor "Monitor13"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen14"
Device "Card14"
Monitor "Monitor14"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen15"
Device "Card15"
Monitor "Monitor15"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
_________________ Being unpolitical means being political without realizing it. - Arne Babenhauserheide ( http://draketo.de )
pkgcore: So fast that it feels unreal - by doing only what is needed. |
|
Back to top |
|
|
ArneBab Guru
Joined: 24 Jan 2006 Posts: 429 Location: Graben-Neudorf, Germany
|
Posted: Tue Sep 29, 2009 12:18 pm Post subject: |
|
|
$ modprobe radeon
didn't help, either. _________________ Being unpolitical means being political without realizing it. - Arne Babenhauserheide ( http://draketo.de )
pkgcore: So fast that it feels unreal - by doing only what is needed. |
|
Back to top |
|
|
somethingelse n00b
Joined: 28 Sep 2009 Posts: 3 Location: Toronto
|
Posted: Tue Sep 29, 2009 1:20 pm Post subject: Does not work on Dell Inspiron 6400 |
|
|
somethingelse wrote: | Hello. I have a Dell Inspiron 6400 laptop with a Core2 Duo 2060 processor. I tried to run the x86 x86_64 LiveDVD; everything was loading ok, it detected the intigrated intel video card and set the x11-xorg-gl renderer but when it got to loading kde it just hangs at a blank screen with a solid cursor in the top left corner. There is no error message, I'm unable to switch tty's or anything of that nature, the system is completely frozen so I can't get at the logs.
I know there is no hardware issues on the machine since I run XP on it all the time without any issues. Any thoughts? |
comprookie2000 wrote: | somethingelse
Try booting with gentoo64 |
Comprookie2000: I tried your suggestion but the Core2 Duo 2060 is an i686 cpu (this is basically a Centrino Duo with Core2 branding for OEMs that does not have 64bit support), so it does not even start to load gentoo, It says this kernel requires x86-64 cpu right off the bat.
The LiveDVD simply doesn't like the Inspiron 6400 |
|
Back to top |
|
|
robvas n00b
Joined: 28 Sep 2009 Posts: 1
|
Posted: Tue Sep 29, 2009 1:51 pm Post subject: |
|
|
Working fine so far over here, running on ESXi. Picks up my VMware disks and video card fine. |
|
Back to top |
|
|
burpnrun n00b
Joined: 29 Sep 2009 Posts: 1 Location: Ontario, Canada
|
Posted: Tue Sep 29, 2009 3:36 pm Post subject: LiveDVD Feedback, FWIW |
|
|
I tried the Live DVD. D/L the x86&64 one, burned to a DVD R/W, booted that (not in a virtual machine). Using "gentoo" (32-bit) at the boot prompt, the load process proceeded but hung at a point when it threw up continuous streams of (I think) "CPU0 ... unexpected LVT TMR interrupt ...". Hard to tell, the stream of messages was too fast. Gave up on that.
Using "gentoo64" at the boot prompt, things went well and the KDE4 desktop loaded. I also tried the XFCE and Gnome DE's. Surfing with SeaMonkey, OpenOffice, Patience, setups, customizations, gedit, filemanagers, etc. in all DE's. No problems found. Software choices mind-boggling, though. Overall appearance comment: excellent text readability in all DE's ... not since PCLOS and openSuse (I use all the time as my production desktop) have I found such clear fonts before. Congrats.
Biggest annoyances: no way to see/access my other partitions (ext3/NTFS/Fat) to access files ... I'm not Linux-savvy, so it would have been nice to be able to mount effortlessly; Using SeaMonkey instead of Firefox is a pain ... SM has no plugins I needed. Minor, but annoying. Also, found I still loathe KDE4 with a vengence. Loved Xfce, hated "do it our way, or else!) Gnome, as usual.
Config: Asus M2N-SLI, 2 gigs DDR2/800, WD250 SATA, Nvidia 8600GT/256 PCIe, Samsung SM 213T, Athlon 64x2 5000, 1 x IDE DVD burner (boot device), 1 x SATA DVD burner.. |
|
Back to top |
|
|
snkmoorthy Guru
Joined: 19 Nov 2002 Posts: 376
|
Posted: Tue Sep 29, 2009 4:03 pm Post subject: transfer the image and make it permanent on a slow desktop? |
|
|
can I blindly copy the content of the squashfs image and fix up a bootloader and other hardware configs to make this a permanent install(p4/512M)? or is there an install option from the LiveDVD?
since I'm not able to start KDM, and the greeting from the livecd ~# prompt says
Quote: | you can start the installer by typing "installer" at the prompt below |
but it 'installer' just returns command not found.
adding for my reference booting with nosmp, gets stuck at
Quote: | ::Scanning for wd7000... |
|
|
Back to top |
|
|
Synergy6 n00b
Joined: 26 Apr 2006 Posts: 11
|
Posted: Tue Sep 29, 2009 5:36 pm Post subject: |
|
|
Tried the amd64 release on my laptop, played with a few programs, no problems.
Just two small points:
- The bootup music played, but about 50 seconds after the desktop had fully loaded.
- The desktop is KDE, but the default term appeared to be Gnome Terminal? Just looked strange.
Otherwise, nice work _________________ Tis better to stay silent and appear dumb, than to open one's mouth and remove all doubt. |
|
Back to top |
|
|
lorcopotia n00b
Joined: 01 Sep 2009 Posts: 3
|
Posted: Tue Sep 29, 2009 7:41 pm Post subject: Install ? LiveDVD 10.0 |
|
|
How could i install LiveDVD 10.0 Test? |
|
Back to top |
|
|
somethingelse n00b
Joined: 28 Sep 2009 Posts: 3 Location: Toronto
|
Posted: Tue Sep 29, 2009 8:30 pm Post subject: Dell Inspiron 6400 issues |
|
|
Ok, so I got the Live DVD to work. The Dell Inspiron 6400 does not support framebuffer, so you have to use the gentoo-nofb kernel. When it tries to start X automatically (if you don't pass the nox option) it hangs. To actually get into kde, I had to use "gentoo-nofb nox" to boot, and then run startx from the cli...then it goes into kde without any issues...very strange, but good enough to allow me to try out kde 4.3 before I install it on my desktop |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Tue Sep 29, 2009 9:59 pm Post subject: Re: Install ? LiveDVD 10.0 |
|
|
lorcopotia wrote: | How could i install LiveDVD 10.0 Test? |
download the iso on first topic, then burn it to a dvd or removable drive like a usb stick. |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Tue Sep 29, 2009 10:04 pm Post subject: Re: LiveDVD Feedback, FWIW |
|
|
burpnrun wrote: | I tried the Live DVD. D/L the x86&64 one, burned to a DVD R/W, booted that (not in a virtual machine). Using "gentoo" (32-bit) at the boot prompt, the load process proceeded but hung at a point when it threw up continuous streams of (I think) "CPU0 ... unexpected LVT TMR interrupt ...". Hard to tell, the stream of messages was too fast. Gave up on that.
Using "gentoo64" at the boot prompt, things went well and the KDE4 desktop loaded. I also tried the XFCE and Gnome DE's. Surfing with SeaMonkey, OpenOffice, Patience, setups, customizations, gedit, filemanagers, etc. in all DE's. No problems found. Software choices mind-boggling, though. Overall appearance comment: excellent text readability in all DE's ... not since PCLOS and openSuse (I use all the time as my production desktop) have I found such clear fonts before. Congrats.
Biggest annoyances: no way to see/access my other partitions (ext3/NTFS/Fat) to access files ... I'm not Linux-savvy, so it would have been nice to be able to mount effortlessly; Using SeaMonkey instead of Firefox is a pain ... SM has no plugins I needed. Minor, but annoying. Also, found I still loathe KDE4 with a vengence. Loved Xfce, hated "do it our way, or else!) Gnome, as usual.
Config: Asus M2N-SLI, 2 gigs DDR2/800, WD250 SATA, Nvidia 8600GT/256 PCIe, Samsung SM 213T, Athlon 64x2 5000, 1 x IDE DVD burner (boot device), 1 x SATA DVD burner.. |
Firefox-3.5.3 is there just under the "Minefield" name.
Can you try booting agai with gentoo (32bit) kernel?
Thanks for all the feedback btw |
|
Back to top |
|
|
huckabuck Tux's lil' helper
Joined: 14 Apr 2007 Posts: 110 Location: Bronx, NY
|
Posted: Tue Sep 29, 2009 10:28 pm Post subject: |
|
|
wow, what a great little package. I put this iso on an 8 gig sandisk cruzer thumbdrive. My T43 booted right into it, penguin framebuffer kicked right in, graphics really nice, and could use all the desktop managers. I never played with KDE at all before so now i get to poke around. Xfce, fluxbox,gnome and openbox are nice also. What a great tool this is. I have to test on all the other machines now.
Thank you very much. |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Tue Sep 29, 2009 10:39 pm Post subject: |
|
|
huckabuck wrote: | wow, what a great little package. I put this iso on an 8 gig sandisk cruzer thumbdrive. My T43 booted right into it, penguin framebuffer kicked right in, graphics really nice, and could use all the desktop managers. I never played with KDE at all before so now i get to poke around. Xfce, fluxbox,gnome and openbox are nice also. What a great tool this is. I have to test on all the other machines now.
Thank you very much. |
Did you like the fast boot from the sandisk compared to a dvd disc? Thanks for the feedback btw, report any and all programs launched. |
|
Back to top |
|
|
huckabuck Tux's lil' helper
Joined: 14 Apr 2007 Posts: 110 Location: Bronx, NY
|
Posted: Tue Sep 29, 2009 10:58 pm Post subject: |
|
|
likewhoa wrote: | huckabuck wrote: | wow, what a great little package. I put this iso on an 8 gig sandisk cruzer thumbdrive. My T43 booted right into it, penguin framebuffer kicked right in, graphics really nice, and could use all the desktop managers. I never played with KDE at all before so now i get to poke around. Xfce, fluxbox,gnome and openbox are nice also. What a great tool this is. I have to test on all the other machines now.
Thank you very much. |
Did you like the fast boot from the sandisk compared to a dvd disc? Thanks for the feedback btw, report any and all programs launched. |
Fast boot was fast. Sweet. No hesitation at all. I didnt have to add any boot parameters to get it going. I didnt try it on a dvd. My T43 only had the dvd reader, and i cant get to my desktop right now. I'm running gentoo gnome-light on both of these. So far i'd only browsed a little with the opera browser. I'm getting ready to try it on a dell mini9 with OSX leopard installed, and 2 other intel macs. I'll be able to check the dell2400 later tonite.
Thanks again. |
|
Back to top |
|
|
keet Guru
Joined: 09 Sep 2008 Posts: 571
|
Posted: Wed Sep 30, 2009 12:53 am Post subject: |
|
|
I tested it on two computers so far: My home-built computer, and my wife's Toshiba laptop, and both worked fine. I like it very much, but since it has KDE 4, I doubt that it will work on either of my laptops, neither of which has more than 256MB of R.A.M. |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Wed Sep 30, 2009 1:33 am Post subject: Re: transfer the image and make it permanent on a slow deskt |
|
|
snkmoorthy wrote: | can I blindly copy the content of the squashfs image and fix up a bootloader and other hardware configs to make this a permanent install(p4/512M)? or is there an install option from the LiveDVD?
since I'm not able to start KDM, and the greeting from the livecd ~# prompt says
Quote: | you can start the installer by typing "installer" at the prompt below |
but it 'installer' just returns command not found.
adding for my reference booting with nosmp, gets stuck at
Quote: | ::Scanning for wd7000... |
|
The only changes you would need to do after copying the contents of image.squashfs into your hard drive would be:
- fdisk /dev/$ROOTDEVICE # Normal gentoo stuff first..
- mount /dev/$ROOTDEVICE /mnt/gentoo # Mount your / partition, if you have more then mount at will to their correct destination
- mkdir /tmp/loop # Temp directory for squashfs contents
- mount -o loop,ro /mnt/cdrom/image.squashfs /tmp/loop # Mounts the contents of the livedvd squashfs image to /tmp/loop
- rsync -a /tmp/loop/ /mnt/gentoo # Copy squashfs contents to hard drive
- Grub # Setup your bootloader
- Kernel Sources "You can use the .config from the dvd or just use genkernel"
- /etc/fstab
- /etc/hosts
- /etc/conf.d/net
- emerge -C livecd-tools mkxf86config sys-apps/hwsetup
- /etc/make.conf
- set root password
- Light a candle then reboot
It should just work (tm) and if I missed anything let me know.
likewhoa
P.S The installer is dead so let it R.I.P kthx - We don't need no stinkin installers!
Last edited by likewhoa on Wed Sep 30, 2009 2:44 am; edited 1 time in total |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Wed Sep 30, 2009 1:53 am Post subject: |
|
|
ArneBab wrote: | comprookie2000 wrote: | any luck? |
Sadly it didn't work.
|
Use this
Code: |
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV515 [Radeon X1300]"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
Good luck! |
|
Back to top |
|
|
eco2geek n00b
Joined: 30 Sep 2009 Posts: 2 Location: Portland, Oregon
|
Posted: Wed Sep 30, 2009 3:48 am Post subject: |
|
|
I don't know how this disc being a dual x86/x64 setup would affect this request, but could you include the kernel source? (You've got room; it's a DVD...) Then we NVIDIA users could probably get video acceleration going while running from the live DVD.
You Gentoo experts all probably already know, but you can install Adobe Flash manually by creating a ~./mozilla/firefox/<profile_dir>/plugins directory, downloading the Flash tarball, and extracting libflashplayer.so to it. (Firefox offers to install it for you, but for some reason, the installation fails.) |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Wed Sep 30, 2009 4:28 am Post subject: |
|
|
eco2geek wrote: | I don't know how this disc being a dual x86/x64 setup would affect this request, but could you include the kernel source? (You've got room; it's a DVD...) Then we NVIDIA users could probably get video acceleration going while running from the live DVD.
You Gentoo experts all probably already know, but you can install Adobe Flash manually by creating a ~./mozilla/firefox/<profile_dir>/plugins directory, downloading the Flash tarball, and extracting libflashplayer.so to it. (Firefox offers to install it for you, but for some reason, the installation fails.) |
We are considering a script that will automatically emerge packages like adobe-flash,nvidia and such. I will look into providing kernel sources. |
|
Back to top |
|
|
Azik Apprentice
Joined: 03 Apr 2005 Posts: 151 Location: Russia, Ufa
|
Posted: Wed Sep 30, 2009 4:56 am Post subject: |
|
|
I missed on my netbook net-wireless/iwl5150-ucode for wireless card, so I can't establish internet connection. It would be great if LiveDVD contains firmares for popular devices (ie, broadcom, iwl etc).
Also Xorg freeze, same as ArneBab, and suggestion from comprookie2000 not working for me too. My netbook is Lenovo Ideapad S10-2 (see http://ru.gentoo-wiki.com/wiki/Lenovo_Ideapad_S10-2 for hardware information). _________________ From Siberia with Love! |
|
Back to top |
|
|
likewhoa l33t
Joined: 04 Oct 2006 Posts: 778 Location: Brooklyn, New York
|
Posted: Wed Sep 30, 2009 7:54 am Post subject: |
|
|
Azik wrote: | I missed on my netbook net-wireless/iwl5150-ucode for wireless card, so I can't establish internet connection. It would be great if LiveDVD contains firmares for popular devices (ie, broadcom, iwl etc).
Also Xorg freeze, same as ArneBab, and suggestion from comprookie2000 not working for me too. My netbook is Lenovo Ideapad S10-2 (see http://ru.gentoo-wiki.com/wiki/Lenovo_Ideapad_S10-2 for hardware information). |
We cannot distribute most firmwares for legal reasons. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|