| View previous topic :: View next topic |
| Author |
Message |
oisch
Tux's lil' helper
Joined: 17 Jul 2002
Posts: 130
|
 Posted: Mon Aug 25, 2003 8:50 pm Post subject: lirc with kernel 2.6 |
 |
|
Good news everyone. I managed to get Lirc working with the development kernel.
Two things in advance:
1. This is my first (public) ebuild and I'm not sure if I did something wrong or forgot anything important, so use at your own risk
2. I'm from germany and I don't claim that my english is perfect, yet I believe it should be understandable.
The kernel patch
There is a kernel patch available from a guy called Flameeye. According to his postings in the kernel mailing list he plans to submit it to the 2.6 kernel. I think this would be a gread addition!
Download the file (http://flameeyes.web.ctonet.it/lirc/patch-lirc-20030802.diff.bz2) and unpack it to /usr/src/
Next, create a symlink named 'linux-2.6.0-test2' that points to your current 2.5/2.6 kernel directory, unless this is not already the name of your kernel directory. For example:
| Code: | | ln -s /usr/src/linux-2.6.0-test4-mm1 /usr/src/linux-2.6.0-test2 |
This is needed because the patch expects this directory as the current kernel dir. Now start patching the kernel by entering the following command:
| Code: | | patch -p0 <patch-lirc-20030806.diff |
Your kernel now includes some Lirc drivers, which were formerly included in the lirc package. All you have to do to enable them is to set the proper config options in the kernel.
The Lirc drivers can be found under Character devices ---> Linux InfraRed Controller --->
Now recompile your kernel and install the modules.
Note: if you find a /dev/lirc file, delete it and create a directory with the same name. Seems as if the naming of the devices has been changed. They are now called /dev/lirc/lirc0 and so on...
The CVS ebuild
The next thing we need are the userspace utilities, like lircd, irexec, etc.
In my case lirc-0.6.6 no longer compiled and the old binaries that were still installed didn't work either, so I created a CVS ebuild for the new lirc-0.7 package.
Go to your local portage directory and create the ebuild named app-misc/lirc-cvs/lirc-cvs-0.7.ebuild with the following content:
| Code: |
# Copyright 1999-2003 Gentoo Technologies, Inc. and Rob Cakebread
# Distributed under the terms of the GNU General Public License v2
# $Header: $
ECVS_SERVER="cvs.lirc.sourceforge.net:/cvsroot/lirc"
ECVS_MODULE="lirc"
ECVS_USER="anonymous"
ECVS_PASS=""
ECVS_AUTH="pserver"
inherit cvs eutils
S="${WORKDIR}/lirc"
DESCRIPTION="LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls."
HOMEPAGE="http://www.lirc.org"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="x86"
DEPEND="virtual/linux-sources"
src_compile() {
export WANT_AUTOCONF_2_5=1
export WANT_AUTOMAKE=1.6
if [ -x ./autogen.sh ] ; then
/bin/bash ./autogen.sh \
--host=${CHOST} \
--prefix=/usr \
--infodir=/usr/share/info \
--mandir=/usr/share/man \
--with-kerneldir="/usr/src/linux" \
--with-moduledir="/lib/modules/${KV}/misc" \
--disable-manage-devices \
${LIRC_OPTS} || die "./autogen.sh failed"
else
die "no autogen.sh script found"
fi
#/bin/bash ./setup.sh || die "./setup.sh failed"
./configure --with-x --with-driver=none
emake || die 'parallel make failed'
}
src_unpack() {
cvs_src_unpack
cd ${S}
}
src_install() {
make DESTDIR=${D} install || die
exeinto /etc/init.d
doexe ${FILESDIR}/lircd
}
|
Now create a digest with 'ebuild lirc-cvs-0.7.ebuild digest'.
Supposedly you also want a lircd init script, so create a file lircd in the 'files' subdirectory with the following contents:
| Code: |
#!/sbin/runscript
# Copyright 1999-2003 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License, v2 or later
depend()
{
need net
}
start()
{
ebegin "Starting lircd"
start-stop-daemon --start --quiet --exec /usr/sbin/lircd -- -d /dev/lirc/lirc0
eend $?
}
stop()
{
ebegin "Stopping lircd"
start-stop-daemon --stop --quiet --exec /usr/sbin/lircd
eend $?
}
|
Now emerge lirc-cvs (and make sure you've already unmerged any old lirc installation, as lirc-cvs uses the same filenames) and that should be it.
One last note: I noticed that mplayer needed to be recompiled. Lirc support worked great when I started up mplayer, but after I closed the mplayer window lirc didn't work anymore. Nevertheless recompiling fixed it and I didn't notice this problem with other apps. |
|
| Back to top |
|
 |
handsomepete
Guru
Joined: 21 Apr 2002
Posts: 548
Location: Kansas City, MO
|
| Posted: Mon Aug 25, 2003 11:24 pm Post subject: |
|
|
| Nifty. Replying to bookmark. |
|
| Back to top |
|
|
Qball
Apprentice
Joined: 25 Nov 2002
Posts: 196
|
| Posted: Fri Aug 29, 2003 9:27 pm Post subject: |
|
|
Thanks was looking for this..
Great job. |
|
| Back to top |
|
|
thadk
Tux's lil' helper
Joined: 21 Jun 2002
Posts: 123
|
| Posted: Tue Sep 02, 2003 9:17 pm Post subject: |
|
|
Okay, it looks like I got this working but I had to change
| Code: | | ECVS_SERVER="cvs.lirc.sourceforge.net:/cvsroot/lirc" |
to
| Code: | | ECVS_SERVER="cvs.sourceforge.net:/cvsroot/lirc" |
per
http://sourceforge.net/cvs/?group_id=5444
Edit: Hmm it dropped the binaries in /usr/local/(s)bin
Edit: had to revert it again to ebuild a second time, odd stuff. Also, I'm only getting:
| Quote: | | lircd 0.7.0pre1: there's no hardware I can use and no peers are specified |
When lircd is run. Hmm. And /dev/lirc/lirc0 exists. |
|
| Back to top |
|
|
oisch
Tux's lil' helper
Joined: 17 Jul 2002
Posts: 130
|
| Posted: Wed Sep 03, 2003 6:39 pm Post subject: |
|
|
| Quote: | | Hmm it dropped the binaries in /usr/local/(s)bin |
As I said: I'm not very experienced in making ebuilds and I'm not sure if this is right or wrong. At least it works for me.
| Quote: | | lircd 0.7.0pre1: there's no hardware I can use and no peers are specified |
Hmm, seems to be related to lircd then.
Maybe their CVS is not always fully working. My CVS snapshot is already a week old. |
|
| Back to top |
|
|
oisch
Tux's lil' helper
Joined: 17 Jul 2002
Posts: 130
|
| Posted: Wed Sep 03, 2003 6:40 pm Post subject: |
|
|
--
Last edited by oisch on Thu Sep 04, 2003 5:17 pm; edited 20 times in total |
|
| Back to top |
|
|
oisch
Tux's lil' helper
Joined: 17 Jul 2002
Posts: 130
|
| Posted: Wed Sep 03, 2003 6:40 pm Post subject: |
|
|
--
Last edited by oisch on Thu Sep 04, 2003 5:24 pm; edited 4 times in total |
|
| Back to top |
|
|
oisch
Tux's lil' helper
Joined: 17 Jul 2002
Posts: 130
|
| Posted: Wed Sep 03, 2003 6:41 pm Post subject: |
|
|
As I tried to upgrade my kernel to mm6 I received the following error:
| Code: |
CC drivers/char/lirc/lirc_dev.o
drivers/char/lirc/lirc_dev.c: In function `irctl_open':
drivers/char/lirc/lirc_dev.c:402: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c:404: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c:408: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c: In function `irctl_close':
drivers/char/lirc/lirc_dev.c:460: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c: In function `irctl_poll':
drivers/char/lirc/lirc_dev.c:483: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c: In function `irctl_ioctl':
drivers/char/lirc/lirc_dev.c:508: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c: In function `irctl_read':
drivers/char/lirc/lirc_dev.c:579: request for member `value' in something not a structure or union
drivers/char/lirc/lirc_dev.c: In function `irctl_write':
drivers/char/lirc/lirc_dev.c:649: request for member `value' in something not a structure or union
make[3]: *** [drivers/char/lirc/lirc_dev.o] Error 1
make[2]: *** [drivers/char/lirc] Error 2
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2
|
It seems as if the patch needs a patch:
To get it work with the 2.6-test4-mm6 kernel open the patch file with a text editor and replace all occurences of "i_rdev.value" with "i_rdev" (without the apostrophes).
Now it will compile without errors. |
|
| Back to top |
|
|
chrispy
Apprentice
Joined: 10 Nov 2002
Posts: 228
Location: Tokyo
|
| Posted: Wed Oct 01, 2003 8:53 am Post subject: |
|
|
I'm trying to get this to work with 2.6-test6-mm1 but when I compile the kernel I get :
| Code: | CC drivers/char/lirc/lirc_dev.o
drivers/char/lirc/lirc_dev.c: In function `lirc_thread':
drivers/char/lirc/lirc_dev.c:142: structure has no member named `pgrp'
drivers/char/lirc/lirc_dev.c:143: structure has no member named `euid'
make[3]: *** [drivers/char/lirc/lirc_dev.o] Error 1
make[2]: *** [drivers/char/lirc] Error 2
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2 |
commenting out line 142 and 143 in the lirc_dev.c file enables me to compile the module, but then when I try to modprobe it, it complains about the settings :
| Code: | | lirc_serial: Unknown parameter `irq4' |
does anybody have an idea ??
cheers |
|
| Back to top |
|
|
theonlymcc
Apprentice
Joined: 16 Sep 2003
Posts: 274
Location: NC
|
| Posted: Wed Nov 12, 2003 8:34 am Post subject: |
|
|
When I do this:
| Code: | | patch -p0 <patch-lirc-20030806.diff |
it says
| Code: | Hunk #1 FAILED at 7.
1 out of 1 hunk FAILED -- saving rejects to file linux-2.6.0-test2/drivers/char/Makefile.rej |
The Linux InfraRed Controller option is in the kernel but no matter if I pick module or built-in it completely skips over that during the kernel compile. What gives? |
|
| Back to top |
|
|
thadk
Tux's lil' helper
Joined: 21 Jun 2002
Posts: 123
|
|
| Back to top |
|
|
theonlymcc
Apprentice
Joined: 16 Sep 2003
Posts: 274
Location: NC
|
| Posted: Thu Nov 13, 2003 7:20 am Post subject: |
|
|
| Thanks for the reply. Tried it now receiving errors like people above when trying to make the kernel. |
|
| Back to top |
|
|
revo
n00b
Joined: 02 Feb 2003
Posts: 57
|
| Posted: Thu Nov 13, 2003 4:12 pm Post subject: |
|
|
| thadk wrote: |
| Quote: | | lircd 0.7.0pre1: there's no hardware I can use and no peers are specified |
When lircd is run. Hmm. And /dev/lirc/lirc0 exists. |
... have you got it to work? i'm also stuck at this point. when i try the
i only get the null driver. what a pity...
_________________
3 wang-tan soup, 3 garlic chicken and 3 orders of fortune cookies, that's it. - and then? |
|
| Back to top |
|
|
grover
Tux's lil' helper
Joined: 27 Sep 2002
Posts: 77
Location: Melbourne, Australia
|
| Posted: Thu Nov 13, 2003 6:47 pm Post subject: |
|
|
I was having the same problems with only the null driver being recognised. I have got it to work though 
Unpack lirc-0.7pre2 and run:
| Code: | | ./configure --with-driver=flyvideo |
Replace flyvideo with whatever driver it is that you use. Then edit the Makefile that is created and find:
| Code: | | SUBDIRS = drivers daemons tools doc |
Delete drivers from that line and lirc will build the daemons and tools with support for your particular driver but it won't attempt to build the actual kernel module.  |
|
| Back to top |
|
|
revo
n00b
Joined: 02 Feb 2003
Posts: 57
|
| Posted: Thu Nov 13, 2003 7:04 pm Post subject: |
|
|
hm. as i am using the 2.6 kernel, i have to use the lirc-cvs ebuild posted at the beginning, so i do not have any ./configure. do you have an idea what to do in my case?
revo
_________________
3 wang-tan soup, 3 garlic chicken and 3 orders of fortune cookies, that's it. - and then? |
|
| Back to top |
|
|
grover
Tux's lil' helper
Joined: 27 Sep 2002
Posts: 77
Location: Melbourne, Australia
|
|
| Back to top |
|
|
grover
Tux's lil' helper
Joined: 27 Sep 2002
Posts: 77
Location: Melbourne, Australia
|
| Posted: Fri Nov 14, 2003 3:22 am Post subject: |
|
|
Here is a quick ebuild I made up that will compile the snapshot without the kernel drivers.
| Code: | # Copyright 1999-2003 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
# $Header: /home/cvsroot/gentoo-x86/app-misc/lirc/lirc-0.7.0_pre2.ebuild,v 1.3 2003/10/22 21:08:47 mholzer Exp $
inherit eutils
DESCRIPTION="LIRC is a package that allows you to decode and send infra-red \
signals of many (but not all) commonly used remote controls."
HOMEPAGE="http://www.lirc.org"
SLOT="0"
LICENSE="GPL-2"
KEYWORDS="~x86"
DEPEND="virtual/linux-sources"
MY_P=${P/_/}
SRC_URI="http://lirc.sourceforge.net/software/snapshots/${MY_P}.tar.bz2"
S=${WORKDIR}/${MY_P}
src_unpack() {
unpack ${A}
cd ${S}
sed -i "s:-O2 -g:${CFLAGS}:" configure
sed -i "s:-O2 -g:${CFLAGS}:" configure.in
}
src_compile() {
./configure \
--host=${CHOST} \
--prefix=/usr \
--infodir=/usr/share/info \
--mandir=/usr/share/man \
--disable-manage-devices \
--enable-sandboxed \
${LIRC_OPTS} || die "./configure failed"
emake -C daemons || die
emake -C tools || die
emake -C doc || die
}
src_install() {
make -C daemons DESTDIR=${D} install || die
make -C tools DESTDIR=${D} install || die
make -C doc DESTDIR=${D} install || die
exeinto /etc/init.d
doexe ${FILESDIR}/lircd
dohtml doc/html/*.html
}
|
Create app-misc/lirc and name it lirc-0.7.0_pre2-r1.ebuild
Create the files dir and create the init script that was posted above.
When running emerge do it like this:
| Code: | | LIRC_OPTS="--with-driver=flyvideo" emerge lirc |
Replace flyvideo with whatever driver you are using. |
|
| Back to top |
|
|
revo
n00b
Joined: 02 Feb 2003
Posts: 57
|
| Posted: Fri Nov 14, 2003 9:15 am Post subject: |
|
|
well, i seem to be too stupid for this making work.
i compiled this as you suggested. lircd -H something shows me now that available driver is "default". i am using lirc_serial as kernel module for my homebrew receiver which is connected to /dev/ttyS0. i have made a symlink from /dev/lirc pointing to /dev/ttyS0. then i do
| Code: | modprobe lirc_serial
modprobe 8250
setserial /dev/ttyS0 uart 16550 |
mode2 says it can't work with my receiver.
| Code: | | /etc/init.d/lircd start |
starts just fine, but what next? if i fire up irw, it does nothing in the first place, second time it says: connection refused.
l | Code: | hal root # lsmod
Module Size Used by
8250 21408 0
serial_core 23680 1 8250
lirc_serial 11936 0
|
| Code: | hal root # setserial /dev/ttyS0
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
|
| Code: | less /etc/modules.d/lircd
alias char-major-61 lirc_serial
options lirc_serial irq=4 io=0x3f8] |
irrecord doesn't work, too.
for reference i give my /usr/src/linux/.config:
| Code: | #
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_X86_4G is not set
# CONFIG_X86_SWITCH_PAGETABLES is not set
# CONFIG_X86_4G_VM_LAYOUT is not set
# CONFIG_X86_UACCESS_INDIRECT is not set
# CONFIG_X86_HIGH_ENTRY is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_MAX_SD_DISKS=256
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle Support
#
# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_TOSHIBA_FIR is not set
CONFIG_VLSI_FIR=m
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Linux InfraRed Controller
#
CONFIG_LIRC_SUPPORT=y
CONFIG_LIRC_MAX_DEV=2
# CONFIG_LIRC_BT829 is not set
# CONFIG_LIRC_IT87 is not set
# CONFIG_LIRC_ATIUSB is not set
# CONFIG_LIRC_PARALLEL is not set
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_HOMEBREW=y
# CONFIG_LIRC_SERIAL_ANIMAX is not set
# CONFIG_LIRC_SERIAL_IRDEO is not set
# CONFIG_LIRC_SERIAL_IRDEO_REMOTE is not set
# CONFIG_LIRC_SERIAL_TRANSMITTER is not set
# CONFIG_LIRC_SERIAL_IGOR is not set
CONFIG_LIRC_SERIAL_COM1=y
# CONFIG_LIRC_SERIAL_COM2 is not set
# CONFIG_LIRC_SERIAL_COM3 is not set
# CONFIG_LIRC_SERIAL_COM4 is not set
# CONFIG_LIRC_SERIAL_OTHER is not set
CONFIG_LIRC_PORT_SERIAL=0x3f8
CONFIG_LIRC_IRQ_SERIAL=4
# CONFIG_LIRC_SIR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
CONFIG_SOUND_CMPCI=y
# CONFIG_SOUND_CMPCI_FM is not set
# CONFIG_SOUND_CMPCI_MIDI is not set
# CONFIG_SOUND_CMPCI_JOYSTICK is not set
CONFIG_SOUND_CMPCI_CM8738=y
# CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set
# CONFIG_SOUND_CMPCI_SPDIFLOOP is not set
CONFIG_SOUND_CMPCI_SPEAKERS=2
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
|
what the hell am i doing wrong??
i'm near to giving up 'cause the lirc homepage doesn't seem to be a good source of help.
can you point me into the right direction?
thanks, revo
_________________
3 wang-tan soup, 3 garlic chicken and 3 orders of fortune cookies, that's it. - and then? |
|
| Back to top |
|
|
Qball
Apprentice
Joined: 25 Nov 2002
Posts: 196
|
| Posted: Sat Nov 15, 2003 11:11 am Post subject: |
|
|
| I think you need to disable uart on youre serial port... |
|
| Back to top |
|
|
revo
n00b
Joined: 02 Feb 2003
Posts: 57
|
| Posted: Sat Nov 15, 2003 1:05 pm Post subject: |
|
|
you mean by | Code: | | setserial/dev/ttyS0 uart none |
?
then i get as reply to | Code: | setserial /dev/ttyS0
/dev/ttyS0, UART: unknown, Port: 0x03f8, IRQ: 4 |
and it doesn't work as well. note the UART: unknown part.
revo
_________________
3 wang-tan soup, 3 garlic chicken and 3 orders of fortune cookies, that's it. - and then? |
|
| Back to top |
|
|
Qball
Apprentice
Joined: 25 Nov 2002
Posts: 196
|
| Posted: Sat Nov 15, 2003 3:22 pm Post subject: |
|
|
| does anybody still have the patch? the website seems to be down. |
|
| Back to top |
|
|
grover
Tux's lil' helper
Joined: 27 Sep 2002
Posts: 77
Location: Melbourne, Australia
|
|
| Back to top |
|
|
Qball
Apprentice
Joined: 25 Nov 2002
Posts: 196
|
| Posted: Sat Nov 15, 2003 5:51 pm Post subject: |
|
|
| grover wrote: | | http://grover.homelinux.org/patch-lirc-2.6.0-test9-oh.diff.bz2 |
Thanks.
The uart part is ok.. if you reload the module it should work.. |
|
| Back to top |
|
|
revo
n00b
Joined: 02 Feb 2003
Posts: 57
|
| Posted: Sun Nov 16, 2003 2:19 am Post subject: |
|
|
no, unfortunately not...
i really don't know what i am doing wrong. i believe it might be a very minor problem, as the log say: | Quote: | 00)
Nov 16 04:25:23 hal lirc_serial: auto-detected active low receiver
Nov 16 04:25:23 hal lirc_dev: lirc_register_plugin:sample_rate: 0
|
when i load lirc_serial. for me this seems to indicate that there is the receiver, it is correctly detected and i am just unable to use it. or am i misinterpreting my logs?
when i do
and look into my logs, i see:
| Quote: | | Nov 16 04:27:52 hal Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled |
so what else can be wrong? i'm really stuck.
revo
_________________
3 wang-tan soup, 3 garlic chicken and 3 orders of fortune cookies, that's it. - and then? |
|
| Back to top |
|
|
DHollywood
n00b
Joined: 17 Nov 2003
Posts: 11
|
| Posted: Mon Nov 17, 2003 2:55 pm Post subject: Problem with /dev/lirc |
|
|
I can't seem to get lircd to fire off. What am I doing wrong?
I deleted /dev/lirc and re-created it mkdir /dev/lirc. Still no go 
igloo lirc # lircd -n -d /dev/lirc/lirc0
lircd 0.7.0pre2: lircd(hauppauge) ready
lircd 0.7.0pre2: accepted new client on /dev/lircd
lircd 0.7.0pre2: could not open /dev/lirc/lirc0
lircd 0.7.0pre2: default_init(): Is a directory
lircd 0.7.0pre2: caught signal
Terminated
The I deleted /dev/lirc, and just made it again with mkdir /dev/lirc
igloo lirc # lircd -n -d /dev/lirc/lirc0
lircd 0.7.0pre2: lircd(hauppauge) ready
lircd 0.7.0pre2: accepted new client on /dev/lircd
lircd 0.7.0pre2: could not get file information for /dev/lirc/lirc0
lircd 0.7.0pre2: default_init(): No such file or directory
0 |
|
| Back to top |
|
|
|
Documentation, Tips & Tricks
