| View previous topic :: View next topic |
| Author |
Message |
fusibou
Tux's lil' helper
Joined: 25 Mar 2003
Posts: 109
|
 Posted: Fri Oct 03, 2003 7:19 pm Post subject: |
 |
|
gkrellm2 doesn't find my ECSk7s5a sensors but using a tweaked version of the sensors script I get:
| Code: |
VCore 1: +1.79 V (min = +1.53, max = +1.87)
VTT: +2.48 V (min = +1.12 V, max = +1.37 V)
+3.3V: +3.26 V (min = +2.96 V, max = +3.60 V)
+5V: +4.90 V (min = +4.50 V, max = +5.47 V)
+12V: +12.20 V (min = +11.36 V, max = +13.80 V)
5VSB: +5.10 V (min = +4.50 V, max = +5.47 V)
Volcano 9: 4927 RPM (min = 3000 RPM, div = 2)
MB Temp: +26.0°C (min = +20°C, max = +60°C)
CPU Temp: +48.0°C (min = +20°C, max = +60°C)
|
I had to make some changes to the script.
1. My path is: dev="/sys/bus/i2c/devices/0-0290" (not 1-0290)
2. I changed the temperature inputs so that I pull #1 for sensor #2 and #2 from sensor #3 (ignoring sensor #1 which on an ecs k7s5a i was given to believe was a crap reading.... it says temps are -100 or +100 C)
I wrote a stupid script called sense.sh:
| Code: |
./sensors.sh
sleep 10
clear
./sense.sh
|
To watch changes but it results in CPU spikes ever 10 seconds so not exactly efficient. |
|
| Back to top |
|
 |
thomasando
Tux's lil' helper
Joined: 05 Apr 2003
Posts: 94
|
| Posted: Sun Oct 05, 2003 7:36 am Post subject: |
|
|
| how do you get the sensors to output in gkrellm? do you have to have the lm-sensors plugin emerged or is there some other way to do it? |
|
| Back to top |
|
|
thomasando
Tux's lil' helper
Joined: 05 Apr 2003
Posts: 94
|
| Posted: Sun Oct 05, 2003 12:05 pm Post subject: |
|
|
got it  running gkrellm2 did the trick - although it doesnt detect my sensors. oh well... it will soon enough |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Sun Oct 05, 2003 12:34 pm Post subject: |
|
|
| fusibou wrote: | gkrellm2 doesn't find my ECSk7s5a sensors but using a tweaked version of the sensors script I get:
| Code: |
VCore 1: +1.79 V (min = +1.53, max = +1.87)
VTT: +2.48 V (min = +1.12 V, max = +1.37 V)
+3.3V: +3.26 V (min = +2.96 V, max = +3.60 V)
+5V: +4.90 V (min = +4.50 V, max = +5.47 V)
+12V: +12.20 V (min = +11.36 V, max = +13.80 V)
5VSB: +5.10 V (min = +4.50 V, max = +5.47 V)
Volcano 9: 4927 RPM (min = 3000 RPM, div = 2)
MB Temp: +26.0°C (min = +20°C, max = +60°C)
CPU Temp: +48.0°C (min = +20°C, max = +60°C)
|
I had to make some changes to the script.
1. My path is: dev="/sys/bus/i2c/devices/0-0290" (not 1-0290)
2. I changed the temperature inputs so that I pull #1 for sensor #2 and #2 from sensor #3 (ignoring sensor #1 which on an ecs k7s5a i was given to believe was a crap reading.... it says temps are -100 or +100 C)
I wrote a stupid script called sense.sh:
| Code: |
./sensors.sh
sleep 10
clear
./sense.sh
|
To watch changes but it results in CPU spikes ever 10 seconds so not exactly efficient. |
you can do:
watch ./sensors
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
wrc1944
Advocate
Joined: 15 Aug 2002
Posts: 2637
Location: Gainesville, Florida
|
| Posted: Wed Oct 22, 2003 8:41 pm Post subject: |
|
|
I can't get either the bash or perl version of this script to work on an Abit KT7-RAID. I know the board's sensors are good, as they work fine with gkrellm in Mandrake, and win XP Pro. I can't get any sensors with ANY kernel on this board, with gkrellm or the script. This is only when booting to Gentoo. If I switch hard drives and boot to win xp or Mandrake, Gkrellm2, or Motherboard monitor works fine.
The bash version gives me this (I named the file sensorb):
wrc@mymachine wrc $ bash sensorb
sensorb: line 7: syntax error near unexpected token `then'
sensorb: line 7: ` if [ $3 ]; then '
wrc@mymachine wrc $
The perl version gives me this (named this version sensors):
wrc@mymachine wrc $ perl sensors
Unrecognized character \xA0 at sensors line 5.
wrc@mymachine wrc $
This happens either as user, or root. I've checked, and recopied the file 3 times.
I changed the target to 1-0018 from 1-0290 (the default). I had to change this also on the MSI, and that worked fine. All the i2c stuff is compiled in the kernel.
On my MSI KT3 Ultra2 board, gkrellm and this script work fine with 2.6 kernels.
Any ideas as to the problem with Gentoo and this Abit KT7 board? I must have something wrong, but I can't figure out what it is- I had no problems on the MSI board.
Thanks,
wrc1944
_________________
Main box- ASRock 880GM-LE AM3
Phenom II x6 1090T, 3.2 GHz, 8GB GSkill DDR3 1333mhz
Samsung SATA 500GB, Radeon HD 4670 1GB DDR3
Gentoo ~x86, ~amd64, glibc-2.15-r1, gcc-4.7.0, kernels 3.3.7, 3.4.0 w/auto-cgroups |
|
| Back to top |
|
|
shm
Advocate
Joined: 09 Dec 2002
Posts: 2380
Location: Atlanta, Universe
|
| Posted: Thu Oct 23, 2003 5:17 am Post subject: |
|
|
| Mafteah wrote: | Not to me
maybe it becaue the lm-sensors installed? |
you're not supposed to have lm-sensors installed in kernel 2.6 anyways..
_________________
what up |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Thu Oct 23, 2003 7:45 am Post subject: |
|
|
btw
i see my sensors on gkrellm now !!!
the new version supports it
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
Cicero
Apprentice
Joined: 21 Jul 2003
Posts: 220
|
| Posted: Thu Oct 23, 2003 11:14 pm Post subject: |
|
|
| fusibou wrote: | gkrellm2 doesn't find my ECSk7s5a sensors but using a tweaked version of the sensors script I get:
|
I don't suppose you could post the relevant parts of your kernel config? Same board, no sensors  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Documentation, Tips & Tricks
