View previous topic :: View next topic |
Author |
Message |
mizery de aria Guru
Joined: 07 Dec 2003 Posts: 309
|
Posted: Fri Nov 28, 2008 7:20 am Post subject: 21x4x DEC-Tulip compatible Gentoo 2008.0 2.6.24-gentoo-r5 |
|
|
I booted a Gentoo 2008.0 i686 LiveCD with params:
Code: | gentoo acpi=off ide=nodma noapic nodetect nodhcp nodmraid nofirewire nohotplug nolapic nosata |
I typed the following, so not all information is available, but I believe it is enough to show the problem
Code: | # uname -a
Linux livecd 2.6.24-gentoo-r5 #1 SMP Thu Jun 26 18:36:15 UTC 2008 i686 Intel(R) Pentium(R) 4 CPU 1700MHz GenuineIntel GNU/Linux
# lspci
...
02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)
# modprobe tulip
# tail -f /var/log/messages &
# ifconfig eth0 up
# dhcpcd eth0
# ping google.com
...
64 bytes from yx-in-f100.google.com (74.125.45.100): icmp_seq=101 ttl=243 time=##.# ms
64 bytes from yx-in-f100.google.com (74.125.45.100): icmp_seq=102 ttl=243 time=##.# ms
64 bytes from yx-in-f100.google.com (74.125.45.100): icmp_seq=103 ttl=243 time=##.# ms
Nov 28 01:09:11 livecd netplugd[15235]: eth0: state ACTIVE flags 0x00011043 UP,BROADCAST,RUNNING,MULTICAST,10000 -> 0x00001003 UP,BROADCAST,MULTICAST
Nov 28 01:09:11 livecd netplugd[15809]: /etc/netplug.d/netplug eth0 out -> pid 15809
ping: sendmsg: Network is unreachable
Nov 28 01:09:13 livecd dhcpcd[15764]: eth0: received SIGTERM, stopping
Nov 28 01:09:13 livecd dhcpcd[15764]: eth0: removing default route via 192.168.29.1 metric 0
Nov 28 01:09:13 livecd dhcpcd[15764]: eth0: deleting IP address 192.168.29.116/24
Nov 28 01:09:13 livecd dhcpcd[15764]: eth0: exiting
Nov 28 01:09:13 livecd netplugd[15235]: eth0: state OUTING pid 15809 exited status 0
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
... |
Why am I losing connection?
Code: | # ifconfig
eth0 Link encap:Ethernet HWaddr ##:##:##:##:##:##
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:212 errors:246 dropped:0 overruns:0 frame:0
TX packets:214 errors:7 dropped:0 overruns:0 carrier:7
collisions:0 txqueuelen:1000
RX bytes:23862 (23.3 Kb) TX bytes:19536 (19.0 Kb)
Interrupt:11 Base address:0x4c00
... |
Prior to this most recent information, booting the Gentoo 2008.0 LiveCD normally (e.g. "gentoo" default boot parameter only) I noticed dmesg becomes flooded with
Code: | tulip_stop_rxtx() failed (CSR5 0xfc740000 CSR6 0x2042202) |
_________________ Do not repIy to or othErwise communicate with me if you use religious, spiritual or similar terminologies or references in your typings. |
|
Back to top |
|
|
alex.blackbit Advocate
Joined: 26 Jul 2005 Posts: 2397
|
Posted: Fri Nov 28, 2008 11:23 am Post subject: |
|
|
are you sure that physically everything is okay?
i mean, the NIC itself, the CAT5 cable, the switch port. |
|
Back to top |
|
|
mizery de aria Guru
Joined: 07 Dec 2003 Posts: 309
|
Posted: Sat Nov 29, 2008 8:37 am Post subject: |
|
|
I am sure everything is okay. I forgot to mention here that prior to booting the 2008.0 LiveCD, I used a 2007.0 Gentoo LiveCD and didn't have any issues with the NIC. _________________ Do not repIy to or othErwise communicate with me if you use religious, spiritual or similar terminologies or references in your typings. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|