| View previous topic :: View next topic |
| Author |
Message |
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 539
|
 Posted: Fri Nov 14, 2008 12:01 am Post subject: Network card help. |
 |
|
Hi I have 3 network cards in my machine from what i can see gentoo is seeing 2 of them so far but only showing me one.
| Code: |
localhost ~ # ifconfig
eth0 Link encap:Ethernet HWaddr 00:19:21:DB:38:F3
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2341 errors:0 dropped:0 overruns:0 frame:0
TX packets:2519 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:436426 (426.1 Kb) TX bytes:548185 (535.3 Kb)
Interrupt:223 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
|
Here is a copy of my lspici .
| Code: |
localhost ~ # lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 405 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:06.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
|
Am i missing something in my kernel ? Pretty sure i have eveything compiled in correct !??!
Also how do i go about even making Gentoo find my third network card its pretty old and i have no idea how to find out what its called.
Thanks guys |
|
| Back to top |
|
 |
Stupendoussteve
n00b
Joined: 06 Sep 2005
Posts: 72
Location: US West
|
| Posted: Fri Nov 14, 2008 12:06 am Post subject: |
|
|
You need to configure the second one. Chances are you never made an /etc/init.d/net.eth1 entry.
So... "ln -s /etc/init.d/net.lo /etc/init.d/net.eth1", then to start the second card at boot "rc-update /etc/init.d/net.eth1 start"
About the third card; if it's not in lspci I have strong doubts that it is supported. |
|
| Back to top |
|
|
gentoo_newguy
Guru
Joined: 10 Oct 2006
Posts: 539
|
| Posted: Fri Nov 14, 2008 12:07 am Post subject: |
|
|
| Ok thanks for all ur help really learning lots atm thanks mate. |
|
| Back to top |
|
|
|
Networking & Security
