View previous topic :: View next topic |
Author |
Message |
queen Veteran
Joined: 19 Jul 2005 Posts: 1642
|
Posted: Wed Nov 12, 2008 4:13 pm Post subject: k3b error on verification after burning cds |
|
|
I am trying to burn some iso cds. Unfortunately, I have ~5-6 coasters. I checked the md5 after downloading the iso. It is fine. It burns successfully, but after verification k3b fails. The error is Code: | written data in track 1 differs from original |
I just tried to burn also on a dvd+rw and got this error:
Code: | cat k3b-error
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.9
QT Version: 3.3.8
Kernel: 2.6.24-gentoo-r3
Devices
-----------------------
Optiarc DVD RW AD-7540A 1.42 (/dev/sr0, /dev/sg1) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump]
Burned media
-----------------------
Unknown
Used versions
-----------------------
growisofs: 7.1
growisofs
-----------------------
:-[ LOAD TRAY failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:44192 -dvd-compat -speed=2.4 -overburn -use-the-force-luke=bufsize:2m |
dmesg (after trying to burn on dvd+rw ) shows
Code: | ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in
cdb 28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00
res 40/00:02:00:28:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in
cdb 28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00
res 40/00:02:00:28:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
|
Any idea what's wrong? |
|
Back to top |
|
|
danomac l33t
Joined: 06 Nov 2004 Posts: 881 Location: Vancouver, BC
|
Posted: Wed Nov 12, 2008 8:52 pm Post subject: |
|
|
Not that this will help much, but I had the same problem and just masked >=k3b-1. For some reason versions < 1 work just fine.
Last edited by danomac on Wed Nov 12, 2008 9:26 pm; edited 1 time in total |
|
Back to top |
|
|
queen Veteran
Joined: 19 Jul 2005 Posts: 1642
|
Posted: Wed Nov 12, 2008 9:16 pm Post subject: |
|
|
danomac wrote: | Not that this will help much, but I had the same problem and just masked >=k3b-1. For some reasons versions < 1 work just fine. |
Oh, that's turning back to prehistory. less than 1 is version 0.12.17. I have 1.0.4
Now I tried emerge -pvuND world and saw an upgrade for cdrtools.
[ebuild U ] app-cdr/cdrtools-2.01.01_alpha51 [2.01.01_alpha34] USE="unicode" 1,715 kB
maybe this will be the solution? which version of cdrtools you have? |
|
Back to top |
|
|
danomac l33t
Joined: 06 Nov 2004 Posts: 881 Location: Vancouver, BC
|
Posted: Wed Nov 12, 2008 9:28 pm Post subject: |
|
|
I'm not in front of my PC now, but I tried so many versions of k3b and upgrading cdrtools. The only thing that worked was downgrading to something less than version 1.0. There were bugs open about the problem, and no end in sight. This was back in May. |
|
Back to top |
|
|
queen Veteran
Joined: 19 Jul 2005 Posts: 1642
|
Posted: Thu Nov 13, 2008 2:42 pm Post subject: |
|
|
danomac wrote: | I'm not in front of my PC now, but I tried so many versions of k3b and upgrading cdrtools. The only thing that worked was downgrading to something less than version 1.0. There were bugs open about the problem, and no end in sight. This was back in May. |
Thanks. It makes me sad. I used it successfully until now. But didn't use it with cds. 95% of the time I burned dvds. |
|
Back to top |
|
|
queen Veteran
Joined: 19 Jul 2005 Posts: 1642
|
Posted: Fri Nov 14, 2008 8:03 pm Post subject: |
|
|
danomac wrote: | I'm not in front of my PC now, but I tried so many versions of k3b and upgrading cdrtools. The only thing that worked was downgrading to something less than version 1.0. There were bugs open about the problem, and no end in sight. This was back in May. |
I downgraded to version 0.12.7 and I still get errors on verification. This time the error was Code: | error while reading from file |
The full debug output is here: Code: |
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.9
QT Version: 3.3.8
Kernel: 2.6.24-gentoo-r3
Devices
-----------------------
Optiarc DVD RW AD-7540A 1.42 (/dev/sr0, /dev/sg1) at /mnt/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-R Dual Layer Jump; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R96R; Restricted Overwrite; Layer Jump]
Used versions
-----------------------
cdrecord: 2.1.1a51
cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
SCSI buffer size: 129024
Cdrecord-ProDVD-ProBD-Clone 2.01.01a51 (i686-pc-linux-gnu) Copyright (C) 1995-2008 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identifikation : 'DVD RW AD-7540A '
Revision : '1.42'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM (current)
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 890880 = 870 KB
FIFO size : 2097152 = 2048 KB
Track 01: data 237 MB
Total size: 272 MB (27:02.57) = 121693 sectors
Lout start: 273 MB (27:04/43) = 121693 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Capacity Blklen/Sparesz. Format-type Type
0 2048 0x00 No Media Present or Unknown Capacity
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 238156
Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 237 MB written.
Track 01: 1 of 237 MB written (fifo 100%) [buf 100%] 0.5x.
Track 01: 2 of 237 MB written (fifo 100%) [buf 100%] 4.1x.
Track 01: 3 of 237 MB written (fifo 100%) [buf 100%] 4.1x.
Track 01: 4 of 237 MB written (fifo 100%) [buf 100%] 12.1x.
Track 01: 5 of 237 MB written (fifo 100%) [buf 100%] 12.0x.
Track 01: 6 of 237 MB written (fifo 100%) [buf 100%] 11.8x.
Track 01: 7 of 237 MB written (fifo 100%) [buf 100%] 11.7x.
Track 01: 236 of 237 MB written (fifo 100%) [buf 100%] 17.9x.
Track 01: 237 of 237 MB written (fifo 100%) [buf 100%] 17.6x.
Track 01: Total bytes read/written: 249227264/249227264 (121693 sectors).
Writing time: 150.645s
Average write speed 11.9x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 19.851s
BURN-Free was never needed.
/usr/bin/cdrecord: fifo had 1932 puts and 1932 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1911 times full, min fill was 68%.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=24 -dao driveropts=burnfree fs=2m -overburn -data /home/queen/systemrescuecd-x86-1.1.1.iso
|
I cut the burning process lines to be shorter. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|