Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Kurobox HG] HDD LED blinking with baselayout 2
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
Peach
Advocate
Advocate


Joined: 08 Mar 2003
Posts: 3676
Location: London, UK

PostPosted: Thu Oct 16, 2008 1:32 pm    Post subject: [Kurobox HG] HDD LED blinking with baselayout 2 Reply with quote

Hi all, I've tried to update my kurobox HG to baselayout2 and openrc 0.3.0-r1 and once I rebooted, the HDD led started to blink continuously and it's not stopping.
what's wrong?
did I miss something? Has anyone tried to make this update?
here is my rc.log
/var/log/rc.log:
 * Strarting avr_evtd ...
 [ ok ]
 * Starting syslog-ng ...
 [ ok ]
 * Setting clock via the NTP client 'ntpdate' ...
 [ ok ]
 * Starting portmap ...
 [ ok ]
 * Mounting network filesystems ...
 [ ok ]
 * Starting ntpd ...
 [ ok ]
 * samba -> start: smbd ...
 [ ok ]
 * samba -> start: nmbd ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
 * Starting vixie-cron ...
 [ ok ]
 * Starting local ...
 [ ok ]

and the full messages output
/var/log/messages:
Oct 16 08:28:08 kurotree syslog-ng[2315]: syslog-ng starting up; version='2.0.9'
Oct 16 08:28:08 kurotree Using Buffalo Linkstation machine description
Oct 16 08:28:08 kurotree Linux version 2.6.22-gentoo-r5 (root@guro) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 Tue Oct 16 03:22:32 EDT 2007
Oct 16 08:28:08 kurotree Found legacy serial port 0 for /soc10x/serial@80004500
Oct 16 08:28:08 kurotree mem=80004500, taddr=80004500, irq=0, clk=130041000, speed=9600
Oct 16 08:28:08 kurotree Found legacy serial port 1 for /soc10x/serial@80004600
Oct 16 08:28:08 kurotree mem=80004600, taddr=80004600, irq=0, clk=130041000, speed=57600
Oct 16 08:28:08 kurotree Entering add_active_range(0, 0, 32768) 0 entries of 256 used
Oct 16 08:28:08 kurotree Adding PCI host bridge /soc10x/pci@fec00000
Oct 16 08:28:08 kurotree BUFFALO Network Attached Storage Series
Oct 16 08:28:08 kurotree (C) 2002-2005 BUFFALO INC.
Oct 16 08:28:08 kurotree Top of RAM: 0x8000000, Total RAM: 0x8000000
Oct 16 08:28:08 kurotree Memory hole size: 0MB
Oct 16 08:28:08 kurotree Zone PFN ranges:
Oct 16 08:28:08 kurotree DMA             0 ->    32768
Oct 16 08:28:08 kurotree Normal      32768 ->    32768
Oct 16 08:28:08 kurotree early_node_map[1] active PFN ranges
Oct 16 08:28:08 kurotree 0:        0 ->    32768
Oct 16 08:28:08 kurotree On node 0 totalpages: 32768
Oct 16 08:28:08 kurotree DMA zone: 256 pages used for memmap
Oct 16 08:28:08 kurotree DMA zone: 0 pages reserved
Oct 16 08:28:08 kurotree DMA zone: 32512 pages, LIFO batch:7
Oct 16 08:28:08 kurotree Normal zone: 0 pages used for memmap
Oct 16 08:28:08 kurotree Built 1 zonelists.  Total pages: 32512
Oct 16 08:28:08 kurotree Kernel command line: root=/dev/sda1 netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32
Oct 16 08:28:08 kurotree netconsole: local port 6666
Oct 16 08:28:08 kurotree netconsole: local IP 192.168.11.150
Oct 16 08:28:08 kurotree netconsole: interface eth0
Oct 16 08:28:08 kurotree netconsole: remote port 6666
Oct 16 08:28:08 kurotree netconsole: remote IP 192.168.11.149
Oct 16 08:28:08 kurotree netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Oct 16 08:28:08 kurotree mpic: Setting up MPIC " EPIC     " version 1.2 at 80040000, max 1 CPUs
Oct 16 08:28:08 kurotree mpic: ISU size: 4, shift: 2, mask: 3
Oct 16 08:28:08 kurotree mpic: Initializing for 12 sources
Oct 16 08:28:08 kurotree PID hash table entries: 512 (order: 9, 2048 bytes)
Oct 16 08:28:08 kurotree time_init: decrementer frequency = 32.522240 MHz
Oct 16 08:28:08 kurotree time_init: processor frequency   = 262.144000 MHz
Oct 16 08:28:08 kurotree Console: colour dummy device 80x25
Oct 16 08:28:08 kurotree console handover: boot [udbg0] -> real [tty0]
Oct 16 08:28:08 kurotree Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct 16 08:28:08 kurotree Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 16 08:28:08 kurotree Memory: 126420k/131072k available (3064k kernel code, 4488k reserved, 132k data, 106k bss, 148k init)
Oct 16 08:28:08 kurotree Calibrating delay loop... 64.92 BogoMIPS (lpj=324608)
Oct 16 08:28:08 kurotree Mount-cache hash table entries: 512
Oct 16 08:28:08 kurotree NET: Registered protocol family 16
Oct 16 08:28:08 kurotree PCI: Probing PCI hardware
Oct 16 08:28:08 kurotree PCI: Cannot allocate resource region 1 of device 0000:00:00.0
Oct 16 08:28:08 kurotree PCI: Cannot allocate resource region 5 of device 0000:00:0c.0
Oct 16 08:28:08 kurotree SCSI subsystem initialized
Oct 16 08:28:08 kurotree libata version 2.21 loaded.
Oct 16 08:28:08 kurotree usbcore: registered new interface driver usbfs
Oct 16 08:28:08 kurotree usbcore: registered new interface driver hub
Oct 16 08:28:08 kurotree usbcore: registered new device driver usb
Oct 16 08:28:08 kurotree NET: Registered protocol family 2
Oct 16 08:28:08 kurotree IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct 16 08:28:08 kurotree TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Oct 16 08:28:08 kurotree TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Oct 16 08:28:08 kurotree TCP: Hash tables configured (established 4096 bind 4096)
Oct 16 08:28:08 kurotree TCP reno registered
Oct 16 08:28:08 kurotree io scheduler noop registered
Oct 16 08:28:08 kurotree io scheduler anticipatory registered (default)
Oct 16 08:28:08 kurotree io scheduler deadline registered
Oct 16 08:28:08 kurotree io scheduler cfq registered
Oct 16 08:28:08 kurotree Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Oct 16 08:28:08 kurotree serial8250.0: ttyS0 at MMIO 0x80004500 (irq = 16) is a 16550A
Oct 16 08:28:08 kurotree serial8250.0: ttyS1 at MMIO 0x80004600 (irq = 17) is a 16550A
Oct 16 08:28:08 kurotree RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize
Oct 16 08:28:08 kurotree loop: module loaded
Oct 16 08:28:08 kurotree r8169 Gigabit Ethernet driver 2.2LK loaded
Oct 16 08:28:08 kurotree eth0: RTL8169s/8110s at 0xc9004c00, 00:0d:0b:99:44:79, IRQ 19
Oct 16 08:28:08 kurotree netconsole: device eth0 not up yet, forcing it
Oct 16 08:28:08 kurotree r8169: eth0: link down
Oct 16 08:28:08 kurotree r8169: eth0: link up
Oct 16 08:28:08 kurotree netconsole: network logging started
Oct 16 08:28:08 kurotree pata_sil680 0000:00:0c.0: version 0.4.6
Oct 16 08:28:08 kurotree sil680: BA5_EN = 1 clock = 00
Oct 16 08:28:08 kurotree sil680: BA5_EN = 1 clock = 10
Oct 16 08:28:08 kurotree sil680: 133MHz clock.
Oct 16 08:28:08 kurotree scsi0 : pata_sil680
Oct 16 08:28:08 kurotree scsi1 : pata_sil680
Oct 16 08:28:08 kurotree ata1: PATA max UDMA/133 cmd 0xfdffbed0 ctl 0xfdffbeda bmdma 0xfdffbef0 irq 20
Oct 16 08:28:08 kurotree ata2: PATA max UDMA/133 cmd 0xfdffbee0 ctl 0xfdffbeea bmdma 0xfdffbef8 irq 20
Oct 16 08:28:08 kurotree ata1.00: ATA-5: ST340016A, 3.19, max UDMA/100
Oct 16 08:28:08 kurotree ata1.00: 78165360 sectors, multi 0: LBA
Oct 16 08:28:08 kurotree ata1.00: configured for UDMA/100
Oct 16 08:28:08 kurotree scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.19 PQ: 0 ANSI: 5
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Write Protect is off
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Write Protect is off
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 16 08:28:08 kurotree sda: sda1 sda2 sda3
Oct 16 08:28:08 kurotree sd 0:0:0:0: [sda] Attached SCSI disk
Oct 16 08:28:08 kurotree sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 16 08:28:08 kurotree physmap platform flash device: 00400000 at ffc00000
Oct 16 08:28:08 kurotree physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Oct 16 08:28:08 kurotree Amd/Fujitsu Extended Query Table at 0x0040
Oct 16 08:28:08 kurotree physmap-flash.0: Swapping erase regions for broken CFI table.
Oct 16 08:28:08 kurotree number of CFI chips: 1
Oct 16 08:28:08 kurotree cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Oct 16 08:28:08 kurotree cmdlinepart partition parsing not available
Oct 16 08:28:08 kurotree RedBoot partition parsing not available
Oct 16 08:28:08 kurotree Using physmap partition information
Oct 16 08:28:08 kurotree Creating 6 MTD partitions on "physmap-flash.0":
Oct 16 08:28:08 kurotree 0x00000000-0x00300000 : "mtd_firmimg"
Oct 16 08:28:08 kurotree 0x00300000-0x00370000 : "mtd_bootcode"
Oct 16 08:28:08 kurotree 0x00370000-0x00380000 : "mtd_status"
Oct 16 08:28:08 kurotree 0x00380000-0x00400000 : "mtd_conf"
Oct 16 08:28:08 kurotree 0x00000000-0x00400000 : "mtd_allflash"
Oct 16 08:28:08 kurotree 0x00310000-0x00400000 : "mtd_data"
Oct 16 08:28:08 kurotree usbmon: debugfs is not available
Oct 16 08:28:08 kurotree ehci_hcd 0000:00:0e.2: EHCI Host Controller
Oct 16 08:28:08 kurotree ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
Oct 16 08:28:08 kurotree ehci_hcd 0000:00:0e.2: irq 21, io mem 0xbfffcf00
Oct 16 08:28:08 kurotree ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 16 08:28:08 kurotree usb usb1: configuration #1 chosen from 1 choice
Oct 16 08:28:08 kurotree hub 1-0:1.0: USB hub found
Oct 16 08:28:08 kurotree hub 1-0:1.0: 5 ports detected
Oct 16 08:28:08 kurotree ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 16 08:28:08 kurotree ohci_hcd 0000:00:0e.0: OHCI Host Controller
Oct 16 08:28:08 kurotree ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
Oct 16 08:28:08 kurotree ohci_hcd 0000:00:0e.0: irq 21, io mem 0xbfffe000
Oct 16 08:28:08 kurotree usb usb2: configuration #1 chosen from 1 choice
Oct 16 08:28:08 kurotree hub 2-0:1.0: USB hub found
Oct 16 08:28:08 kurotree hub 2-0:1.0: 3 ports detected
Oct 16 08:28:08 kurotree ohci_hcd 0000:00:0e.1: OHCI Host Controller
Oct 16 08:28:08 kurotree ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
Oct 16 08:28:08 kurotree ohci_hcd 0000:00:0e.1: irq 21, io mem 0xbfffd000
Oct 16 08:28:08 kurotree usb usb3: configuration #1 chosen from 1 choice
Oct 16 08:28:08 kurotree hub 3-0:1.0: USB hub found
Oct 16 08:28:08 kurotree hub 3-0:1.0: 2 ports detected
Oct 16 08:28:08 kurotree usbcore: registered new interface driver usbserial
Oct 16 08:28:08 kurotree drivers/usb/serial/usb-serial.c: USB Serial Driver core
Oct 16 08:28:08 kurotree drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Oct 16 08:28:08 kurotree usbcore: registered new interface driver ftdi_sio
Oct 16 08:28:08 kurotree drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Oct 16 08:28:08 kurotree mice: PS/2 mouse device common for all mice
Oct 16 08:28:08 kurotree i2c /dev entries driver
Oct 16 08:28:08 kurotree rtc-rs5c372 0-0032: assuming rs5c372b
Oct 16 08:28:08 kurotree rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.4
Oct 16 08:28:08 kurotree rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
Oct 16 08:28:08 kurotree TCP cubic registered
Oct 16 08:28:08 kurotree NET: Registered protocol family 1
Oct 16 08:28:08 kurotree NET: Registered protocol family 17
Oct 16 08:28:08 kurotree rtc-rs5c372 0-0032: setting the system clock to 2008-10-16 06:27:39 (1224138459)
Oct 16 08:28:08 kurotree linkstation: disarming the AVR watchdog:
Oct 16 08:28:08 kurotree kjournald starting.  Commit interval 5 seconds
Oct 16 08:28:08 kurotree EXT3-fs: mounted filesystem with ordered data mode.
Oct 16 08:28:08 kurotree VFS: Mounted root (ext3 filesystem) readonly.
Oct 16 08:28:08 kurotree Freeing unused kernel memory: 148k init
Oct 16 08:28:08 kurotree EXT3 FS on sda1, internal journal
Oct 16 08:28:08 kurotree kjournald starting.  Commit interval 5 seconds
Oct 16 08:28:08 kurotree EXT3 FS on sda3, internal journal
Oct 16 08:28:08 kurotree EXT3-fs: mounted filesystem with ordered data mode.
Oct 16 08:28:08 kurotree Adding 506036k swap on /dev/sda2.  Priority:-1 extents:1 across:506036k
Oct 16 13:28:11 kurotree -- MARK --
Oct 16 15:28:12 kurotree ntpdate[2328]: step time server 81.208.58.150 offset 25200.373349 sec
Oct 16 15:28:14 kurotree ntpd[2369]: ntpd 4.2.4p4@1.1520-o mer ott 15 02:30:05 UTC 2008 (1)
Oct 16 15:28:14 kurotree ntpd[2370]: precision = 1.000 usec
Oct 16 15:28:14 kurotree ntpd[2370]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Oct 16 15:28:14 kurotree ntpd[2370]: Listening on interface #1 lo, 127.0.0.1#123 Enabled
Oct 16 15:28:14 kurotree ntpd[2370]: Listening on interface #2 eth0, 192.168.123.147#123 Enabled
Oct 16 15:28:14 kurotree ntpd[2370]: kernel time sync status 0040
Oct 16 15:28:14 kurotree ntpd[2370]: frequency initialized 20.578 PPM from /var/lib/ntp/ntp.drift


imho, there's nothing wrong, apart from the blinking light... pls enlighten me ! :D

[edit] tried to downgrade openrc to 0.2.5 but nothing changed
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum