| View previous topic :: View next topic |
| Author |
Message |
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
 Posted: Thu Oct 09, 2008 9:59 pm Post subject: Problem z instalacją madwifi-ng |
 |
|
witam
stawiam na nowo gentoo, na razie jest czyste , więc w pierwszej kolejności próbuję zainstalować madwifi-ng aby korzystać z sieci i mojej karty Orinoco Gold, więc wszystko robię pod Ubuntu, ale podczas instalki wywali mi taki błąd
| Code: | linux # emerge madwifi-ng
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 1) net-wireless/madwifi-ng-0.9.3.3 to /
* madwifi-0.9.3.3.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking madwifi-0.9.3.3.tar.bz2 ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 2.6.24-gentoo-r7
* Checking for suitable kernel configuration options...
* requires CONFIG_KMOD to be set to y or m
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Once you have satisfied these options, please try merging
* this package again.
*
* ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* madwifi-ng-0.9.3.3.ebuild, line 34: Called linux-mod_pkg_setup
* linux-mod.eclass, line 465: Called linux-info_pkg_setup
* linux-info.eclass, line 613: Called check_extra_config
* linux-info.eclass, line 511: Called die
* The specific snippet of code:
* die "Incorrect kernel configuration options"
* The die message:
* Incorrect kernel configuration options
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/die.env'.
*
* Messages for package net-wireless/madwifi-ng-0.9.3.3:
* requires CONFIG_KMOD to be set to y or m
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Once you have satisfied these options, please try merging
* this package again.
*
* ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* madwifi-ng-0.9.3.3.ebuild, line 34: Called linux-mod_pkg_setup
* linux-mod.eclass, line 465: Called linux-info_pkg_setup
* linux-info.eclass, line 613: Called check_extra_config
* linux-info.eclass, line 511: Called die
* The specific snippet of code:
* die "Incorrect kernel configuration options"
* The die message:
* Incorrect kernel configuration options
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/die.env'.
|
z tego co wyczytałem to coś z kernelem, ale kiedy próbuję przekonfigurować kernela to mam coś takiego
| Code: | linux # make && make modules_instal
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
dnsdomainname: Unknown host
Kernel: arch/x86/boot/bzImage is ready (#1)
Building modules, stage 2.
MODPOST 1 modules
make: *** No rule to make target `modules_instal'. Stop. |
EDIT:
Po ostatniej próbie jakoś się pomyślnie skompilował kernel ale teraz madwifi wywala mi tak
| Code: | ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 3117: Called linux-mod_src_compile
environment, line 2372: Called die
The specific snippet of code:
emake HOSTCC="$(tc-getBUILD_CC)" CC="$(get-KERNEL_CC)" LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} || die "Unable to make ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}.";
[31;01m*[0m The die message:
Unable to make KERNELPATH=/usr/src/linux all.
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/environment'.
|
chyba ta część jest najbardziej istotna
| Code: | | Unable to make KERNELPATH=/usr/src/linux all |
ale nie wiem jak to zinterpretować, mam źródło w tym katalogu więc nie wiem co nie tak...
może ktoś pomóc w rozszyfrowaniu ?
Pozdrawiam |
|
| Back to top |
|
 |
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1990
Location: Poland
|
| Posted: Fri Oct 10, 2008 5:05 am Post subject: |
|
|
użyj kernela "zen-sources" w wersji 2.6.26 (dostępna w overlayu zen), ten kernel ma już wbudowany sterownik madwifi i dzięki temu zero problemów  |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Fri Oct 10, 2008 7:55 am Post subject: |
|
|
| Quote: | | requires CONFIG_KMOD to be set to y or m |
|
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Fri Oct 10, 2008 10:57 pm Post subject: |
|
|
chyba troszkę porażka jest z tym madwifi, choć zapewne ja coś źle robię, zainstalowałem tego kernela zen-source, lecz nie mogę go skompilować , ponieważ kiedy chcę wykonać
| Code: | | genkernel --menuconfig all |
to wywala
| Code: | genkernel --menuconfig all
* Gentoo Linux Genkernel; Version 3.4.10
* Running with options: --menuconfig all
* Linux Kernel 2.6.27-rc7-zen3 for x86...
* The build-host kernel does not appear to have loop device support.
* Please load loop support before running genkernel!
* ERROR: Load loop support!
* -- Grepping log... --
* The build-host kernel does not appear to have loop device support.
* Please load loop support before running genkernel!
* Gentoo Linux Genkernel; Version 3.4.10
* Running with options: --menuconfig all
* ERROR: Load loop support!
* -- End log... --
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
|
a mandwifi nie zainstaluję bez konfiguracji jajka
| Code: | # emerge madwifi-ng
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 1) net-wireless/madwifi-ng-0.9.3.3 to /
* madwifi-0.9.3.3.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking madwifi-0.9.3.3.tar.bz2 ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
*
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
2.
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
6.
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
27
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
-rc7-zen3
/usr/portage/eclass/linux-info.eclass: line 219: [: too many arguments
* Could not find a usable .config in the kernel source directory.
* Please ensure that /usr/src/linux points to a configured set of Linux sources.
* If you are using KBUILD_OUTPUT, please set the environment var so that
* it points to the necessary object directory so that it might find .config.
*
* ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* madwifi-ng-0.9.3.3.ebuild, line 34: Called linux-mod_pkg_setup
* linux-mod.eclass, line 465: Called linux-info_pkg_setup
* linux-info.eclass, line 613: Called check_extra_config
* linux-info.eclass, line 425: Called require_configured_kernel
* linux-info.eclass, line 145: Called die
* The specific snippet of code:
* die "Kernel not configured; no .config found in ${KV_OUT_DIR}"
* The die message:
* Kernel not configured; no .config found in /usr/src/linux
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/die.env'.
*
* Messages for package net-wireless/madwifi-ng-0.9.3.3:
* Could not find a usable .config in the kernel source directory.
* Please ensure that /usr/src/linux points to a configured set of Linux sources.
* If you are using KBUILD_OUTPUT, please set the environment var so that
* it points to the necessary object directory so that it might find .config.
*
* ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* madwifi-ng-0.9.3.3.ebuild, line 34: Called linux-mod_pkg_setup
* linux-mod.eclass, line 465: Called linux-info_pkg_setup
* linux-info.eclass, line 613: Called check_extra_config
* linux-info.eclass, line 425: Called require_configured_kernel
* linux-info.eclass, line 145: Called die
* The specific snippet of code:
* die "Kernel not configured; no .config found in ${KV_OUT_DIR}"
* The die message:
* Kernel not configured; no .config found in /usr/src/linux
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/die.env'.
|
 |
|
| Back to top |
|
|
Spaulding
Apprentice
Joined: 16 Apr 2006
Posts: 159
Location: /dev/vagina
|
| Posted: Sat Oct 11, 2008 8:07 am Post subject: |
|
|
| Code: | | * ERROR: Load loop support! |
masz jak bykiem napisane  dokompiluj loop'a jako modul albo *. i na przyszlosc uzywaj:
| Code: | | genkernel --no-clean --menuconfig all |
mi madwifi-ng dziala dobrze, ale skoro masz zen-sources a mbar mowil ze tam jest madwifi-ng to moze skompiluj poprawnie jajko?
btw. nie uzywaj ath5k bo na tym ledwo radio dziala |
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sat Oct 11, 2008 12:07 pm Post subject: |
|
|
Problem jest tylko taki że nie mogę nic kompletnie zrobić z kernelem, coś dokompilować, przekompilować czy przekonfigurować, gdyż wywala mi co chwilę ten sam błąd że kernel nie jest skonfigurowany, a nie mogę się dostać do opcji konfiguracji
Arfrever: Ortografia |
|
| Back to top |
|
|
Spaulding
Apprentice
Joined: 16 Apr 2006
Posts: 159
Location: /dev/vagina
|
| Posted: Sat Oct 11, 2008 12:11 pm Post subject: |
|
|
jakto?
| Code: | | cd /usr/src/linux ; make menuconfig ; make -j2 ; make modules_install ; cp arch/x86/boot/bzImage ... |
|
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sat Oct 11, 2008 1:03 pm Post subject: |
|
|
nie mam pojęcia co i jak z czym nie tak, nie jestem doświadczonym użytkowniekim i po_prostu nie wiem co te komunikaty oznaczają, wiem tylko tyle że kiedy wykonuję
| Code: | | genkernel --no-clean --menuconfig all |
wywala mi
| Code: |
# genkernel --no-clean --menuconfig all
* Gentoo Linux Genkernel; Version 3.4.10
* Running with options: --no-clean --menuconfig all
* Linux Kernel 2.6.27-rc7-zen3 for x86...
* The build-host kernel does not appear to have loop device support.
* Please load loop support before running genkernel!
* ERROR: Load loop support!
* -- Grepping log... --
* The build-host kernel does not appear to have loop device support.
* Please load loop support before running genkernel!
* Gentoo Linux Genkernel; Version 3.4.10
* Running with options: --no-clean --menuconfig all
* ERROR: Load loop support!
* -- End log... --
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
|
a kiedy
| Code: | | # emerge madwifi-ng |
to mam tak
| Code: | emerge -av madwifi-ng
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] net-wireless/madwifi-ng-0.9.3.3 USE="-injection" 0 kB
Total: 1 package (1 new), Size of downloads: 0 kB
Would you like to merge these packages? [Yes/No] y
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 1) net-wireless/madwifi-ng-0.9.3.3 to /
* madwifi-0.9.3.3.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking madwifi-0.9.3.3.tar.bz2 ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 2.6.27-rc7-zen3
* Checking for suitable kernel configuration options... [ ok ]
>>> Unpacking source...
>>> Unpacking madwifi-0.9.3.3.tar.bz2 to /var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/work
* Applying madwifi-ng-0.9.3-uudecode-gcda-fix.patch ... [ ok ]
* Converting madwifi-0.9.3.3/ath/Makefile to use M= instead of SUBDIRS= [ ok ]
* Converting madwifi-0.9.3.3/ath_hal/Makefile to use M= instead of SUBD [ ok ]
* Converting madwifi-0.9.3.3/net80211/Makefile to use M= instead of SUBDIRS= ... [ ok ]
* Converting madwifi-0.9.3.3/ath_rate/Makefile to use M= instead of SUBDIRS= ... [ ok ]
* Converting madwifi-0.9.3.3/ath_rate/amrr/Makefile to use M= instead of SUBDIRS= ... [ ok ]
* Converting madwifi-0.9.3.3/ath_rate/onoe/Makefile to use M= instead of SUBDIRS= ... [ ok ]
* Converting madwifi-0.9.3.3/ath_rate/sample/Makefile to use M= instead of SUBDIRS= ... [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/work/madwifi-0.9.3.3 ...
* Preparing ath_hal module
../scripts/get_arch.mk:44: *** ARCH mismatch: supplied "x86", determined "i386". Stop.
*
* ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3121: Called linux-mod_src_compile
* environment, line 2376: Called die
* The specific snippet of code:
* emake HOSTCC="$(tc-getBUILD_CC)" CC="$(get-KERNEL_CC)" LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} || die "Unable to make ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}.";
* The die message:
* Unable to make KERNELPATH=/usr/src/linux all.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/environment'.
*
* Messages for package net-wireless/madwifi-ng-0.9.3.3:
*
* ERROR: net-wireless/madwifi-ng-0.9.3.3 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3121: Called linux-mod_src_compile
* environment, line 2376: Called die
* The specific snippet of code:
* emake HOSTCC="$(tc-getBUILD_CC)" CC="$(get-KERNEL_CC)" LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} || die "Unable to make ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}.";
* The die message:
* Unable to make KERNELPATH=/usr/src/linux all.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/madwifi-ng-0.9.3.3/temp/environment'.
|
i to tyle co się dizeje, jeśli ktoś wie jak można by te problemy rozwiązać, prosiła bym o odpowiedź, biorąc pod uwagę że nie jestem znawcą gentoo więc odpowiedzi typu
| Quote: | jakto?
Kod:
cd /usr/src/linux ; make menuconfig ; make -j2 ; make modules_install ; cp arch/x86/boot/bzImage ... |
nic mi zupełnie nie mówią, gdybym był obeznany z linuxem za pewne bym nie przedstawiał na forum swojego problemu a sam bym go rozwiązał
Arfrever: Ortografia |
|
| Back to top |
|
|
mistix
Apprentice
Joined: 27 Dec 2006
Posts: 247
Location: Gliwice / Poland
|
| Posted: Sat Oct 11, 2008 1:23 pm Post subject: |
|
|
Sprawdź sobie czy masz dobrze ustawioną architekturę procesora bo | Code: | | ARCH mismatch: supplied "x86", determined "i386". Stop. |
Krzyczy, że z nią coś jest nie tak. Sprawdź i w kernelu i w make.conf.
_________________
Cuda się zdarzają. Co potwierdzi każdy programista. |
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sat Oct 11, 2008 6:41 pm Post subject: |
|
|
wydaje mi się że tu chodzi o to iż jest problem z niejakim modułem LOOP, gdyż widać to podczas próby użycia genkernel.
po wydaniu "make modules_install" w katalogu kernela na samym końcu wyświetla mi coś takiego
| Code: | WARNING: /lib/modules/2.6.27-rc7-zen3/block/loop.ko needs unknown symbol blk_put_queue
|
problem w tym że nie wiem jak to zinterpretować... |
|
| Back to top |
|
|
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1990
Location: Poland
|
| Posted: Sun Oct 12, 2008 6:46 am Post subject: |
|
|
po pierwsze: powiedziałem, żebyś użył kernela w wersji .26, a nie .27, bo ta jeszcze nie jest stabilna, no i ostatnio jak sprawdzałem, to madwifi w tej wersji nie było.
po drugie: po cholerę wracasz do kompilacji modułu madwifi, skoro jest on w kernelu (.26)?
po trzecie: zapomnij o genkernelu, masz podane wyżej polecenie "make menuconfig" (ale jak coś naknocisz, to musisz najpierw zrobić "make clean"). |
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sun Oct 12, 2008 11:01 am Post subject: |
|
|
OK, dzis zainstaluje te wersje o ktorej pisales, myslalem ze ta wesrsja jak nowsza to tez ma madwifi juz, ale ok, dzieki za info, zobacze co dzis sie wymysli.
Sorki za brak pl znakow, ale z pracy pisze. |
|
| Back to top |
|
|
kfiaciarka
Veteran
Joined: 20 May 2005
Posts: 1498
Location: Dobre Miasto, Poland
|
| Posted: Sun Oct 12, 2008 12:00 pm Post subject: |
|
|
@mbar
| mbar wrote: | po pierwsze: powiedziałem, żebyś użył kernela w wersji .26, a nie .27, bo ta jeszcze nie jest stabilna, no i ostatnio jak sprawdzałem, to madwifi w tej wersji nie było.
po drugie: po cholerę wracasz do kompilacji modułu madwifi, skoro jest on w kernelu (.26)?
po trzecie: zapomnij o genkernelu, masz podane wyżej polecenie "make menuconfig" (ale jak coś naknocisz, to musisz najpierw zrobić "make clean"). |
Witam,
co rozumiesz, przez to że madwifi jest w kernelu? Niby tak samo jest stkwebcam (stk11xx), ale kernelowy się wiesza. Poza tym ath5k wspiera tylko kilka chipsetów i nie koniecznie akurat ten (mojego AR2425 jakoś dobrze nie obsługuje). Wyjątkiem jest moim zdaniem alsa która śmiga z jajka;-)
@d0b
Jak ci się nie kompiluje na .27 ( tak jak mi) to możesz skorzystać zmadwifi-ng-9999 |
|
| Back to top |
|
|
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1990
Location: Poland
|
| Posted: Sun Oct 12, 2008 7:53 pm Post subject: |
|
|
mam na myśli to:
| Code: | lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Wireless LAN qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x Arrow keys navigate the menu. <Enter> selects submenus --->. Highlighted x
x letters are hotkeys. Pressing <Y> includes, <N> excludes, <M> modularizes x
x features. Press <Esc><Esc> to exit, <?> for Help, </> for Search. Legend: x
x [*] built-in [ ] excluded <M> module < > module capable x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x [ ] Wireless LAN (pre-802.11) x x
x x [ ] Wireless LAN (IEEE 802.11) x x
x x < > Intel PRO/Wireless 3945ABG raw packet driver x x
x x *** Atheros 802.11(a/b/g) PCI/Cardbus support *** x x
x x <M> Atheros PCI/Cardbus cards x x
x x [ ] Atheros: Debugging support for Atheros PCI/Cardbus cards x x
x x Atheros: Default Transmission Rate Control Algorithm (Minstrel) x x
x x [ ] Adaptive Multi-Rate Retry control algorithm x x
x x [ ] Atsushi Onoe's rate control algorithm x x
x x [ ] Sample Rate control algorithm x x
x x -*- A wandering minstrel rate control algorithm x x
x x x x
x x x x
|
to nie jest ath5k, tylko właśnie madwifi. |
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sun Oct 12, 2008 9:09 pm Post subject: |
|
|
tak tu działam z pod tego Ubuntu , próbując doprowdzić do stanu używalności Gentoo, ale wydaje mi się że to chyba jednak przez "chroot" nie ma takiego pełnego dostępu do gentoo, nic mi nie idzie , zrobiłem emerge --sync i teraz nawet instalka głupiego laymana coś nie powiiodła się, to znaczy powiodła ale coś sapie jak mu zapodam
| Code: | # layman -a zen-overlay
Traceback (most recent call last):
File "/usr/bin/layman", line 37, in <module>
main()
File "/usr/bin/layman", line 34, in main
Actions(Config())
File "/usr/lib/python2.5/site-packages/layman/action.py", line 473, in __init__
result += i[1](config).run()
File "/usr/lib/python2.5/site-packages/layman/action.py", line 160, in __init__
self.selection = [i.decode(enc) for i in self.selection]
TypeError: decode() argument 1 must be string, not None |
i de_facto nie mam laymana działającego i nie mogę dodać żadych overlayow, ehhh, nie_wiem, kiedyś jak instalowałem pierwszy raz Gentoo miełaem połączenie z siecią przez wbudowaną kartę i wszystko fajnie poszło, choć sam tam namieszałem i później się system posypał, teraz chciałem go zreaktywować, bo jednak gento mi się podobało ale cóż chyba rady nie dam, np Ubuntu liveCD ma wszystko co mi trzeba, od_razu widzi moją kartę, grafikę , i wszystko, nie wiem właśnie czy sobie nie zapodać, ale jeszcze spróbuję raz zainstalować Gentoo, może się uda w końcu jakoś.
Myślę że tamat można zamknąć, choć nie solved to nie ma co ciągnąc bo jak widzę to u mnie coś nie tak i tyle
Pozdro i dzięki za odpowiedzi i pomoc
Arfrever: Ortografia |
|
| Back to top |
|
|
Arfrever
Bodhisattva
Joined: 29 Apr 2006
Posts: 2463
Location: 異世界
|
| Posted: Sun Oct 12, 2008 10:30 pm Post subject: |
|
|
| d0b wrote: | | Code: | # layman -a zen-overlay
Traceback (most recent call last):
File "/usr/bin/layman", line 37, in <module>
main()
File "/usr/bin/layman", line 34, in main
Actions(Config())
File "/usr/lib/python2.5/site-packages/layman/action.py", line 473, in __init__
result += i[1](config).run()
File "/usr/lib/python2.5/site-packages/layman/action.py", line 160, in __init__
self.selection = [i.decode(enc) for i in self.selection]
TypeError: decode() argument 1 must be string, not None |
|
Błąd 235165.
(U mnie sys.getfilesystemencoding() nigdy nie zwróciło None.) |
|
| Back to top |
|
|
kfiaciarka
Veteran
Joined: 20 May 2005
Posts: 1498
Location: Dobre Miasto, Poland
|
| Posted: Mon Oct 13, 2008 6:48 am Post subject: |
|
|
@mbar,
jakie to jajko bo w vanilliówkach 2.6.26.6 i 2.6.27 tego nie znalazłem. Dlatego korzystam z madwifi-ng-9999 co się kompiluje na .27 |
|
| Back to top |
|
|
lazy_bum
l33t
Joined: 16 Feb 2005
Posts: 691
|
| Posted: Mon Oct 13, 2008 7:41 am Post subject: |
|
|
| kfiaciarka wrote: | @mbar,
jakie to jajko bo w vanilliówkach 2.6.26.6 i 2.6.27 tego nie znalazłem. Dlatego korzystam z madwifi-ng-9999 co się kompiluje na .27 |
Czytać czytać czytać:
| mbar wrote: | | użyj kernela "zen-sources" w wersji 2.6.26 (dostępna w overlayu zen), ten kernel ma już wbudowany sterownik madwifi i dzięki temu zero problemów :) |
_________________
roslin uberlay | grubelek |
|
| Back to top |
|
|
kfiaciarka
Veteran
Joined: 20 May 2005
Posts: 1498
Location: Dobre Miasto, Poland
|
| Posted: Mon Oct 13, 2008 5:27 pm Post subject: |
|
|
| lazy_bum wrote: | | kfiaciarka wrote: | @mbar,
jakie to jajko bo w vanilliówkach 2.6.26.6 i 2.6.27 tego nie znalazłem. Dlatego korzystam z madwifi-ng-9999 co się kompiluje na .27 |
Czytać czytać czytać:
| mbar wrote: | | użyj kernela "zen-sources" w wersji 2.6.26 (dostępna w overlayu zen), ten kernel ma już wbudowany sterownik madwifi i dzięki temu zero problemów |
|
hehe, tak czułem, że jakiś popaczowany To dlatego, że od jakiegoś czasu wycofałem zen-sources u siebie z użytku |
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Fri Oct 17, 2008 2:44 am Post subject: |
|
|
@kfiaciarka
możesz napisać jak mam zainstalować tą wersję madwifi-ng-9999 ?? z kąd wziąść , jakiś overlay ?? bo na stronie https://bugs.gentoo.org/show_bug.cgi?id=193549 jest cos tam ale nie wiem jak to zainstalować bezpośrednio z tej strony.
THX |
|
| Back to top |
|
|
kfiaciarka
Veteran
Joined: 20 May 2005
Posts: 1498
Location: Dobre Miasto, Poland
|
| Posted: Fri Oct 17, 2008 5:19 pm Post subject: |
|
|
| d0b wrote: | @kfiaciarka
możesz napisać jak mam zainstalować tą wersję madwifi-ng-9999 ?? z kąd wziąść , jakiś overlay ?? bo na stronie https://bugs.gentoo.org/show_bug.cgi?id=193549 jest cos tam ale nie wiem jak to zainstalować bezpośrednio z tej strony.
THX |
tzn. musisz sciągnąć te ebuildy i skopiować do swojego overlaya (/usr/local/portage). Kopiujesz do katalogu net-wireless. Tworzysz tam podkatalog madwifi-ng i osobny dla madwifi-ng-tools. Kopiujesz tam ebuildy. Jeśli są jeszcze jakieś dodatkowe pliki, patche to umieszczasz je w podkatalogu files (/usr/local/portage/net-wireless/madwifi-ng/files). Nastepnie jako root piszesz w konsoli | Code: | | ebuild /usr/local/portage/net-wireless/madwifi-ng/madwifi-ng-9999.ebuild manifest |
i tak samo dla tools. Jeśli trzeba będzie odmaskować ebuildy no to odpowiednie wpisy trzeba dodać do /etc/portage/packages.unmask i package.keywords.
Last edited by kfiaciarka on Sat Oct 18, 2008 7:28 am; edited 1 time in total |
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sat Oct 18, 2008 12:39 am Post subject: |
|
|
po tym zabiegu mam stworzony jakiś plik Manifest, co z nim dalej uczynić ??
| Code: | # ebuild /usr/local/portage/net-wireless/madwifi-ng/madwifi-ng-9999.ebuild manifest
Appending /usr/local/portage to PORTDIR_OVERLAY...
>>> Creating Manifest for /usr/local/portage/net-wireless/madwifi-ng
|
|
|
| Back to top |
|
|
kfiaciarka
Veteran
Joined: 20 May 2005
Posts: 1498
Location: Dobre Miasto, Poland
|
| Posted: Sat Oct 18, 2008 7:27 am Post subject: |
|
|
| Code: | | emerge =madwifi-ng-9999 =madwifi-ng-tools-9999 |
|
|
| Back to top |
|
|
d0b
Apprentice
Joined: 30 Jul 2007
Posts: 151
Location: Poland / London, UK
|
| Posted: Sat Oct 18, 2008 11:53 am Post subject: |
|
|
pakiety są zamaskowane
| Code: | # emerge =madwifi-ng-9999 =madwifi-ng-tools-9999
Calculating dependencies -!!! A file is not listed in the Manifest: '/usr/portage/net-wireless/madwifi-ng/madwifi-ng-9999.ebuild'
!!! All ebuilds that could satisfy "=net-wireless/madwifi-ng-9999" have been masked.
!!! One of the following masked packages is required to complete your request:
- net-wireless/madwifi-ng-9999 (masked by: corruption)
For more information, see MASKED PACKAGES section in the emerge man page or
refer to the Gentoo Handbook.
|
dodałem do /etc/portage/package.unmask wpis
| Code: | | =net-wireless/madwifi-ng-9999 |
ale nie, czy w_ogóle dobrze dodałem ten wpis ?? bo chyba w package.keywords nic nie trzeba wpisywać skoro zamaskowane przez "corruption" ?
Arfrever: Ortografia |
|
| Back to top |
|
|
Arfrever
Bodhisattva
Joined: 29 Apr 2006
Posts: 2463
Location: 異世界
|
| Posted: Sat Oct 18, 2008 12:03 pm Post subject: |
|
|
| d0b wrote: | pakiety są zamaskowane
| Code: | # emerge =madwifi-ng-9999 =madwifi-ng-tools-9999
Calculating dependencies -!!! A file is not listed in the Manifest: '/usr/portage/net-wireless/madwifi-ng/madwifi-ng-9999.ebuild'
!!! All ebuilds that could satisfy "=net-wireless/madwifi-ng-9999" have been masked.
!!! One of the following masked packages is required to complete your request:
- net-wireless/madwifi-ng-9999 (masked by: corruption)
For more information, see MASKED PACKAGES section in the emerge man page or
refer to the Gentoo Handbook.
|
dodałem do /etc/portage/package.unmask wpis
| Code: | | =net-wireless/madwifi-ng-9999 |
ale nie, czy w_ogóle dobrze dodałem ten wpis ?? bo chyba w package.keywords nic nie trzeba wpisywać skoro zamaskowane przez "corruption" ? |
| Code: | | ebuild ${ŚCIEŻKA_DO_EBUILDU} manifest |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish) 
