Canon BJC-1000 configuring problems

[jemrpo]

Hi:
I just rescued my old BJC-1000 from a dark corner, so I tried to install it on my gentoo box, but isn't working,
I got all configured in cups, and kernel recognizes my printer:
jemrpo@desktop ~ $ dmesg | grep -i print
parport0: Printer, Canon BJC-1000
But somehow I send a test print page and have no response.
I check /var/log/cups/error_log and prints of:

jemrpo@desktop ~ $ tail /var/log/cups/error_log
I [12/Aug/2008:20:28:52 -0500] commptr="?op=cancel-job&job_id=15&job_printer_uri=/printers/Canon"
I [12/Aug/2008:20:28:52 -0500] Started "/usr/libexec/cups/cgi-bin/jobs.cgi" (pid=7253)
I [12/Aug/2008:20:28:52 -0500] Job 15 was canceled by "root".
I [12/Aug/2008:20:29:16 -0500] Adding start banner page "none" to job 17.
I [12/Aug/2008:20:29:16 -0500] Adding end banner page "none" to job 17.
I [12/Aug/2008:20:29:16 -0500] Job 17 queued on "Canon" by "jemrpo".
I [12/Aug/2008:20:29:16 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 7263) for job 17.
I [12/Aug/2008:20:29:16 -0500] Started filter /usr/libexec/cups/filter/pstoraster (PID 7264) for job 17.
I [12/Aug/2008:20:29:16 -0500] Started filter /usr/libexec/cups/filter/rastertogutenprint.5.1 (PID 7265) for job 17.
I [12/Aug/2008:20:29:16 -0500] Started backend /usr/libexec/cups/backend/serial (PID 7266) for job 17.

I tried changing baud rate and drivers and nothing happens, Printer works properly on WinXP by the way.

jemrpo@desktop ~ $ sudo cat /etc/cups/printers.conf
# Printer configuration file for CUPS v1.2.12
# Written by cupsd on 2008-08-12 20:28
<Printer BJC-600>
Info
Location
DeviceURI serial:/dev/ttyS0?baud=1200+bits=8+parity=none+flow=none
State Idle
StateTime 1218590474
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer Canon>
Info
Location
DeviceURI serial:/dev/ttyS0?baud=1200+bits=8+parity=none+flow=none
State Idle
StateTime 1218590783
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>

Thanks in advance.

[jemrpo]

I've already red gentoo printing guide http://www.gentoo.org/doc/en/printing-howto.xm, did everything and still nothing happends, can anyone tell me his experience with this printers please.

[jemrpo]

desktop etc # dmesg |grep -i printer
parport0: Printer, Canon BJC-1000
desktop etc #

and I have no /dev/lp0 and no /dev/parport0

Please I need some help.