| View previous topic :: View next topic |
| Author |
Message |
h0mer`-
Apprentice
Joined: 02 Aug 2004
Posts: 215
|
 Posted: Fri Jul 11, 2008 1:18 pm Post subject: Hylafax & AVM B1 |
 |
|
My first try to get a faxserver running and i dont know yet what the problem is atm.
I wont go into detail what i tried with hylafax because i think i am missing something to get my hardware running in the first place. So here is what i did to enable the hardware. If i am missing something please give your input.
I have an active ISDN card (AVM B1), for which i enabled the support in the kernel and i already emerged the net-dialup/capi4k-utils package.
I uncommented the following line in /etc/capi.conf
| Code: | | b1pci b1.t4 DSS1 - - - - |
and emerged the firmware package net-dialup/isdn-firmware.
Now i start the capi service.
| Code: | /etc/init.d/capi start
* Loading CAPI ... [ ok ]
* Starting CAPI ... [ ok ]
* Available CAPI controllers:
* 1 b1pci running b1pci-e400 B1 3.10-02 0xe400 10 r4
|
and a capiinfo gives me the following output...
| Code: |
# capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.10-02 (49.2)
Serial Number: 3905966
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000001f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x8000003f
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
0100
0200
39000000
1f000040
1b0b0000
3f000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS |
So i guess my system recognizes the card and i can use it now?
How do i know which device the card is using? /dev/capi20 doesnt work neither does ttyS0. Any ideas? |
|
| Back to top |
|
 |
cassiol
Guru
Joined: 16 Oct 2006
Posts: 304
Location: /BR/SC/FLORIPA
|
|
| Back to top |
|
|
h0mer`-
Apprentice
Joined: 02 Aug 2004
Posts: 215
|
| Posted: Fri Jul 11, 2008 6:53 pm Post subject: |
|
|
| Thanks for pointing that out but that doesnt help me at all because i already done them. I hope that somebody can confirm that at least what i have done in my first post is correct and maybe answer my last questions. I will then point out what i tried after that. |
|
| Back to top |
|
|
h0mer`-
Apprentice
Joined: 02 Aug 2004
Posts: 215
|
| Posted: Mon Jul 14, 2008 4:14 pm Post subject: |
|
|
| Okay, its working now, though i cannot commnunicate with my card through minicom or cu which is very strange and through me off track. |
|
| Back to top |
|
|
|
Networking & Security
