| View previous topic :: View next topic |
| Author |
Message |
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
 Posted: Fri May 23, 2008 8:59 am Post subject: [solved] Xorg questions |
 |
|
Hello Gentoo fans!
I'm just at installing Gentoo on my macbook, now at the point for the x server and I have a few questions on the output of startx:
Somewhere I get the line
| Code: | | (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found |
What does it mean? Do I have to put two device sections in my xorg.conf? One for PCI:0:2:1 and one for PCI:0:2:0? Is it somehow related to dual screen stuff?
Here's my entry for the graphics card:
| Code: |
Section "Device"
Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
|
Next issue...I get three similar lines like the following:
| Code: |
expected keysym, got XF86KbdLightOnOff: line 70 of pc
|
What do they tell me? After the 3 "keysym" lines the following note occurs:
| Code: |
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
|
Further I get the following and have no clue what it means:
| Code: |
xinit: No such file or directory (errno 2): Cannot register with ConsoleKit: org.freedesktop.CkConnector.Error: Unable to open session: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
|
And in the end I get:
| Code: |
(EE) intel(0): I830 Vblank Pipe Setup Failed 0
.FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
|
Anyone got an idea about all this?
It's not that my X isn't working, seems to run well, but I just want to know whats going on...its a matter of understanding.
greetings,
bienchen
Last edited by bienchen on Fri May 30, 2008 2:33 pm; edited 1 time in total |
|
| Back to top |
|
 |
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5150
Location: Hamilton, Ontario
|
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 23, 2008 9:54 am Post subject: |
|
|
of course:
| Code: |
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "mac"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# updated 2007-12-07
# use command "synclient -m 1" to see raw output
# common stuff
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
# not using edge scrolling
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "0"
# use two finger scrolling
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1" # set to 0 if you don't want horizontal scrolling
# scroll speed, lower is faster
Option "HorizScrollDelta" "10"
Option "VertScrollDelta" "10"
# minimum pressure motion factor
Option "PressureMotionMinZ" "10"
# touch and untouch thresholds, higher numbers if you like to push hard
Option "FingerLow" "10"
Option "FingerHigh" "20" # change to 30 or 40 if you like
# borders based on output from synclient
Option "LeftEdge" "20"
Option "RightEdge" "1200"
Option "TopEdge" "20"
Option "BottomEdge" "370"
# speeds, smaller number for a slower mouse
Option "MinSpeed" "0.8" # 0.5 is very slow, 1.5 is very fast
Option "MaxSpeed" "1.2" # up to 1.5 works ok
Option "AccelFactor" "0.10"
# tap times, change to suit your tapping habits
Option "MaxTapMove" "100"
Option "MaxTapTime" "100"
Option "MaxDoubleTapTime" "200"
# don't change these or two finger tap stops working
Option "TapButton2" "3"
Option "TapButton3" "2"
# must be commented out or normal tapping wont work
#Option "TapButton1" "0"
# needed for disabled while typing fix
Option "SHMConfig" "on"
EndSection
Section "Device"
Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
# Beryl/ Compiz
#Option "DRI" "true"
#Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
|
It's just a mixture of the conf from the gentoo macbook wiki and an ubuntu system.
greetings,
bienchen |
|
| Back to top |
|
|
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5150
Location: Hamilton, Ontario
|
| Posted: Fri May 23, 2008 11:03 am Post subject: |
|
|
ok, as far as i can tell, it's good... anywho...
| Quote: | | xinit: No such file or directory (errno 2): Cannot register with ConsoleKit: org.freedesktop.CkConnector.Error: Unable to open session: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory |
is dbus running?
the xkeyboard stuff, i wouldn't know about... it might be because you're using the mac xkbvariant... (but you might need that) either way, it's not a fatal error.
the fontpath stuff i've seen before too but never found it to be bothersome... again, not fatal.
as for the busid stuff... i'd check with "lspci" to make sure you're using the right id.
i hope this clears up a little bit... 
cheers
_________________
bunder @ freenode | bunhax - tame your SMP!
gentoo shells | the remains of UFGO |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 23, 2008 11:33 am Post subject: |
|
|
Hm, how do I check if dbus is running?
Is there a way to solve the fontpaht issue?
greetings,
bienchen |
|
| Back to top |
|
|
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5150
Location: Hamilton, Ontario
|
| Posted: Fri May 23, 2008 12:19 pm Post subject: |
|
|
| bienchen wrote: | Hm, how do I check if dbus is running?
|
/etc/init.d/dbus status ?
cheers
_________________
bunder @ freenode | bunhax - tame your SMP!
gentoo shells | the remains of UFGO |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 23, 2008 2:04 pm Post subject: |
|
|
with dbus running (was indeed down) I get:
| Code: | xinit: Resource temporarily unavailable (errno 11): Cannot register with ConsoleKit: org.freedesktop.CkConnector.Error: Unable to open session: The name org.freedesktop.ConsoleKit was not provided by any .service files
|
A snip from `lspci`:
| Code: | 00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
|
Do we need something else from `lspci`?
greetings,
bienchen |
|
| Back to top |
|
|
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5150
Location: Hamilton, Ontario
|
| Posted: Fri May 23, 2008 2:13 pm Post subject: |
|
|
i would try 0:2:1, but 0:2:0 is probably the right one...
as for those other xinit errors, i googled for consolekit and came up with sys-auth/consolekit... got that installed? it's probably optional though. I see the dbus error went away... that's good. 
the fontpath stuff you can ignore too, it's probably checking for fonts that aren't there... no biggie.
| Quote: | | (EE) intel(0): I830 Vblank Pipe Setup Failed 0 |
i don't know what causes that either.
cheers
_________________
bunder @ freenode | bunhax - tame your SMP!
gentoo shells | the remains of UFGO |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 23, 2008 3:08 pm Post subject: |
|
|
consolekit is already installed...
and if I use 0:2:1 I get a "no screen found" error. So it's 0:2:2...I guess it is related to dual screen mode.
The "(EE) intel(0): I830 Vblank Pipe Setup Failed 0" messages are probably from the driver itself?
greetings,
bienchen |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 23, 2008 3:16 pm Post subject: |
|
|
As a great philosophist once said:
Hit me baby, one more time...it might help
Thou, consolekit is installed but I remerged it and...there was a note after emerging telling me to "restart" the service...funny thing to restart something you don't have started anyway...same problem as dbus.
That is: One problem less.
So only the keyboard issue and the and the 0:2:1 thingi to go...probably the keyboard issue should go to the "gentoo on a macbook" thread.
greetings,
bienchen |
|
| Back to top |
|
|
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5150
Location: Hamilton, Ontario
|
| Posted: Fri May 23, 2008 3:35 pm Post subject: |
|
|
| Quote: | | The "(EE) intel(0): I830 Vblank Pipe Setup Failed 0" messages are probably from the driver itself? |
yeah, but they don't seem to be fatal, so you can probably overlook them... you should see what non-fatal errors fglrx throws me...
_________________
bunder @ freenode | bunhax - tame your SMP!
gentoo shells | the remains of UFGO |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 23, 2008 3:40 pm Post subject: |
|
|
Yep, I don't care about them intel driver errors.
So, I go and try to solve the keyboard issue elsewhere and if I manage to do so, I come back, edit this thread and put it on [solved], right?
greetings,
bienchen |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Wed May 28, 2008 3:49 pm Post subject: |
|
|
I found something for the
| Code: | | (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found |
"Problem" on http://wiki.x.org/wiki/FAQWarningMessages
I use this as a resolution to the problem, leaves me with the keyboard 
greetings,
bienchen |
|
| Back to top |
|
|
VoidMage
l33t
Joined: 14 Oct 2006
Posts: 995
|
| Posted: Thu May 29, 2008 8:36 am Post subject: |
|
|
The 'XKEYBOARD keymap compiler' has to be ignored for now.
the other one goes away with recent enough x11-libs/libX11:
it stops when /usr/share/X11/XKeysymDB has that keysym defined. |
|
| Back to top |
|
|
bienchen
Apprentice
Joined: 14 Sep 2004
Posts: 231
Location: Hamburg, Germany
|
| Posted: Fri May 30, 2008 2:32 pm Post subject: |
|
|
Queer...shortly after you writing about a new libx11 a new one was available and now that issue is solved 
greetings,
bienchen |
|
| Back to top |
|
|
|
Desktop Environments
