DiLupo
n00b
Joined: 14 Jul 2003
Posts: 32
Location: Amsterdam
|
 Posted: Fri Jul 25, 2003 5:09 pm Post subject: PCI & ACPI gaan niet helemaal samen? |
 |
|
Hoi Allen,
Niet dat alles niet werkt ofzo.... maar onderstaande gebeurt telkens als ik Gentoo opstart...
| Code: |
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfd9ca, last bus=2
PCI: Using configuration type 1
ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0511: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI-0243: *** Error: Could not install Pci_config handler for PCI0, AE_ALREADY_EXISTS
ACPI-0243: *** Error: Could not install Pci_config handler for PCI0, AE_ALREADY_EXISTS
ACPI-0243: *** Error: Could not install Pci_config handler for PCI0, AE_ALREADY_EXISTS
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
schedule_task(): keventd has not started
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9, disabled)
ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 9, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 9, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 9, disabled)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
PCI: No IRQ known for interrupt pin A of device 00:1f.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' |
Komt iemand dit bekend voor? Kan ik hier iets aan doen? Ik wil acpi toch wel blijven gebruiken...
_________________
If printing from other applications fails, too, reinstall your system.
Boot with a Windows boot disk and type on the command line: c:\windows\command\deltree /y c:\windows and then setup.
- answer on www.adobeforums.com - |
|
Dutch
