| View previous topic :: View next topic |
| Author |
Message |
papapenguin
l33t
Joined: 20 Sep 2005
Posts: 694
Location: Bellevue
|
 Posted: Thu Mar 13, 2008 5:06 pm Post subject: kernel upgrade fine, then lost all sound... [SOLVED -kinda] |
 |
|
Recently upgraded kernel (2.6.23-r9). Rebuilt all modules, everything seemed to work fine. All system notifications worked. I tried to open noatun, but got a SIGSEGV crash message. Then opened juK fine, listened to an mp3, and decided to clean system...
Then I ran:
eclean distfiles
eclean packages
revdep-rebuild
and CRASH...
...all sound is dead
I use usr/bin/play as system notification player and jackd as rest.
| Quote: |
09:58:22.344 Patchbay deactivated.
09:58:22.429 Statistics reset.
09:58:22.466 Startup script...
09:58:22.468 artsshell -q terminate
09:58:22.556 ALSA connection graph change.
JACK tmpdir identified as [/dev/shm]
JACK tmpdir identified as [/dev/shm]
sound server terminated
09:58:23.053 Startup script terminated successfully.
09:58:23.054 JACK is starting...
09:58:23.055 /usr/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n2 -i2 -o2
09:58:23.060 JACK was started with PID=5308.
jackd 0.103.0
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
Enhanced3DNow! detected
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|1024|2|44100|2|2|nomon|swmeter|-|32bit
control device hw:0
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode
configuring for 44100Hz, period = 1024 frames, buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: cannot set channel count to 2 for capture
ALSA: cannot configure capture channel
cannot load driver module alsa
no message buffer overruns
09:58:23.487 JACK was stopped successfully.
09:58:23.488 Post-shutdown script...
09:58:23.489 killall jackd
jackd: no process killed
09:58:23.917 Post-shutdown script terminated with exit status=256.
09:58:25.305 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
JACK tmpdir identified as [/dev/shm]
|
| Quote: |
papapenguin ~ # dmesg
Linux version 2.6.23-gentoo-r9 (root@papapenguin) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #2 SMP PREEMPT Wed Mar 12 13:12:07 PDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004dff0000 (usable)
BIOS-e820: 000000004dff0000 - 000000004dffffc0 (ACPI data)
BIOS-e820: 000000004dffffc0 - 000000004e000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
351MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 319472) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 319472
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 319472
On node 0 totalpages: 319472
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 703 pages used for memmap
HighMem zone: 89393 pages, LIFO batch:15
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000E5010, 0014 (r0 OID_00)
ACPI: RSDT 4DFFFBC0, 0030 (r1 INSYDE RSDT_000 1 _CSI 10100)
ACPI: FACP 4DFFFAC0, 0074 (r1 INSYDE FACP_000 100 _CSI 10100)
ACPI: DSDT 4DFFB6D0, 43E3 (r1 INSYDE VT8372 1000 INTL 2002025)
ACPI: FACS 4DFFFFC0, 0040
ACPI: BOOT 4DFFFB50, 0028 (r1 INSYDE SYS_BOOT 100 _CSI 10100)
ACPI: DBGP 4DFFFB80, 0034 (r1 INSYDE DBGP_000 100 _CSI 10100)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 50000000 (gap: 4e000000:b1f80000)
Built 1 zonelists in Zone order. Total pages: 316977
Kernel command line: root=/dev/hda3
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (019d0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c057c000 soft=c0574000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1658.580 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1261228k/1277888k available (3430k kernel code, 15912k reserved, 831k data, 264k init, 360384k highmem)
virtual kernel memory layout:
fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc052f000 - 0xc0571000 ( 264 kB)
.data : 0xc045994f - 0xc0529804 ( 831 kB)
.text : 0xc0100000 - 0xc045994f (3430 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3320.27 BogoMIPS (lpj=6640541)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: AMD mobile AMD Athlon(tm) XP-M 2200+ stepping 00
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe8a94, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [1106/3156] 000600 00
PCI: Found 0000:00:01.0 [1106/b091] 000604 01
PCI: Found 0000:00:09.0 [104c/ac56] 000607 02
PCI: Found 0000:00:10.0 [1106/3038] 000c03 00
PCI: Found 0000:00:10.1 [1106/3038] 000c03 00
PCI: Found 0000:00:10.3 [1106/3104] 000c03 00
PCI: Found 0000:00:11.0 [1106/3177] 000601 00
PCI: Calling quirk c0337aa4 for 0000:00:11.0
PCI: Calling quirk c0338856 for 0000:00:11.0
PCI quirk: region 1000-107f claimed by vt8235 PM
PCI quirk: region 1400-140f claimed by vt8235 SMB
PCI: Found 0000:00:11.1 [1106/0571] 000101 00
PCI: Found 0000:00:11.5 [1106/3059] 000401 00
PCI: Found 0000:00:11.6 [1106/3068] 000780 00
PCI: Found 0000:00:12.0 [1106/3065] 000200 00
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [5333/8d04] 000300 00
PCI: Fixups for bus 0000:01
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:09.0, config 000000, pass 0
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
PCI: Scanning behind PCI bridge 0000:00:09.0, config 000000, pass 1
PCI: Bus scan for 0000:00 returning with max=05
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:05: iomem range 0xfedff000-0xfedff3ff has been reserved
pnp: 00:07: ioport range 0x330-0x331 has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x1000-0x107f has been reserved
pnp: 00:07: ioport range 0x1400-0x140f has been reserved
pnp: 00:07: iomem range 0x4e000000-0x4fffffff has been reserved
got res [58000000:58000fff] bus [58000000:58000fff] flags 200 for BAR 0 of 0000:00:09.0
PCI: moved device 0000:00:09.0 resource 0 (200) to 58000000
got res [98000000:9800ffff] bus [98000000:9800ffff] flags 7200 for BAR 6 of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: e0000000-efffffff
PREFETCH window: 90000000-9fffffff
PCI: Bus 2, cardbus bridge: 0000:00:09.0
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 50000000-53ffffff
MEM window: 54000000-57ffffff
PCI: Calling quirk c03384dd for 0000:00:01.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x37 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1205427405.252:1): initialized
highmem bounce pool size: 64 pages
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Mar 12 2008 12:02:47) installed
Lock_Nolock (built Mar 12 2008 12:03:0 installed
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Calling quirk c0108478 for 0000:00:00.0
PCI: Calling quirk c0338f3e for 0000:00:00.0
PCI: Calling quirk c03cf59e for 0000:00:00.0
PCI: Calling quirk c03f1f37 for 0000:00:00.0
PCI: Calling quirk c0108478 for 0000:00:01.0
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Calling quirk c0338f3e for 0000:00:01.0
PCI: Calling quirk c03cf59e for 0000:00:01.0
PCI: Calling quirk c03f1f37 for 0000:00:01.0
PCI: Calling quirk c0338f3e for 0000:00:09.0
PCI: Calling quirk c03cf59e for 0000:00:09.0
PCI: Calling quirk c03f1f37 for 0000:00:09.0
PCI: Calling quirk c0108478 for 0000:00:10.0
PCI: Calling quirk c0338f3e for 0000:00:10.0
PCI: Calling quirk c03cf59e for 0000:00:10.0
PCI: Calling quirk c03f1f37 for 0000:00:10.0
PCI: Calling quirk c0108478 for 0000:00:10.1
PCI: Calling quirk c0338f3e for 0000:00:10.1
PCI: Calling quirk c03cf59e for 0000:00:10.1
PCI: Calling quirk c03f1f37 for 0000:00:10.1
PCI: Calling quirk c0108478 for 0000:00:10.3
PCI: Calling quirk c0338f3e for 0000:00:10.3
PCI: Calling quirk c03cf59e for 0000:00:10.3
PCI: Calling quirk c03f1f37 for 0000:00:10.3
PCI: Calling quirk c0108478 for 0000:00:11.0
PCI: Calling quirk c0338f3e for 0000:00:11.0
PCI: Calling quirk c03cf59e for 0000:00:11.0
PCI: Calling quirk c03f1f37 for 0000:00:11.0
PCI: Calling quirk c0108478 for 0000:00:11.1
PCI: Calling quirk c0338f3e for 0000:00:11.1
PCI: Calling quirk c03cf59e for 0000:00:11.1
PCI: Calling quirk c03f1f37 for 0000:00:11.1
PCI: Calling quirk c0108478 for 0000:00:11.5
PCI: Calling quirk c0338f3e for 0000:00:11.5
PCI: Calling quirk c03cf59e for 0000:00:11.5
PCI: Calling quirk c03f1f37 for 0000:00:11.5
PCI: Calling quirk c0108478 for 0000:00:11.6
PCI: Calling quirk c0338f3e for 0000:00:11.6
PCI: Calling quirk c03cf59e for 0000:00:11.6
PCI: Calling quirk c03f1f37 for 0000:00:11.6
PCI: Calling quirk c0108478 for 0000:00:12.0
PCI: Calling quirk c0338f3e for 0000:00:12.0
PCI: Calling quirk c03cf59e for 0000:00:12.0
PCI: Calling quirk c03f1f37 for 0000:00:12.0
PCI: Calling quirk c0338f3e for 0000:01:00.0
PCI: Calling quirk c03cf59e for 0000:01:00.0
PCI: Calling quirk c03f1f37 for 0000:01:00.0
Boot video device is 0000:01:00.0
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
savagefb: mapped io at f8880000
savagefb: probed videoram: 32768k
savagefb: Detected current MCLK value of 25256 kHz
savagefb: mapped framebuffer at f8980000, pbase == 90000000
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
savagefb v0.4.0_2.6: 32640kB VRAM, using 800x600, 37.878kHz, 60Hz
Console: switching to colour frame buffer device 100x37
fb: S3 ProSavage8 frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SBTN]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: Unable to derive IRQ for device 0000:00:11.1
PCI: Calling quirk c03384dd for 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
hda: WDC WD400UE-22HCT0, ATA DISK drive
hda: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 264k freed
Yenta: CardBus bridge found at 0000:00:09.0 [1071:8381]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:09.0, mfunc 0x010c1672, devctl 0x64
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.102
input: PC Speaker as /class/input/input4
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
USB Universal Host Controller Interface driver v3.0
Yenta: ISA IRQ mask 0x00d8, PCI irq 11
Socket status: 30000059
agpgart: Detected VIA Apollo Pro266 chipset
agpgart: AGP aperture is 64M @ 0xa0000000
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Calling quirk c03384dd for 0000:00:10.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
NET: Registered protocol family 23
input: Video Bus as /class/input/input5
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Calling quirk c03384dd for 0000:00:10.1
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Calling quirk c03384dd for 0000:00:10.3
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
PCI: Enabling Mem-Wr-Inval for device 0000:00:10.3
ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Calling quirk c03384dd for 0000:00:12.0
eth0: VIA Rhine II at 0xf0000100, 00:40:d0:4a:e5:34, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
PCI: Calling quirk c03384dd for 0000:00:11.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Calling quirk c03384dd for 0000:00:11.6
pccard: PCMCIA card inserted into slot 0
PCI: Enabling bus mastering for device 0000:00:11.6
PCI: Setting latency timer of device 0000:00:11.6 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia: registering new device pcmcia0.0
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI interrupt for device 0000:00:11.6 disabled
VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Mouse as /class/input/input6
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver snd-usb-audio
EXT3 FS on hda3, internal journal
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Calling quirk c03384dd for 0000:00:11.5
PCI: Enabling bus mastering for device 0000:00:11.5
PCI: Setting latency timer of device 0000:00:11.5 to 64
Adding 500464k swap on /dev/hda2. Priority:-1 extents:1 across:500464k
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
papapenguin ~ #
|
I have no idea what happened. I've now rebuilt modules, but still nothing... any ideas?
Last edited by papapenguin on Mon Dec 08, 2008 6:09 am; edited 1 time in total |
|
| Back to top |
|
 |
papapenguin
l33t
Joined: 20 Sep 2005
Posts: 694
Location: Bellevue
|
| Posted: Sat Mar 15, 2008 12:09 am Post subject: |
|
|
| I have no idea what happened, so I installed the 2.6.24-r2 kernel using my oldconfig of 2.6.23-r2 and now things seem to work. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
