| View previous topic :: View next topic |
| Author |
Message |
Raposatul
n00b
Joined: 25 Sep 2007
Posts: 53
|
 Posted: Tue Feb 26, 2008 6:10 pm Post subject: Kernel Panic unable to mount root |
 |
|
Greetings,
I have a HP server with Smart Array P400. After the installation and the reboot, I get kernel panic and it's unable to mount the root partition.
| Quote: | (chroot) livecd init.d # fdisk -l
Disk /dev/cciss/c0d0: 293.5 GB, 293564211200 bytes
255 heads, 32 sectors/track, 70265 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 25 101984 83 Linux
/dev/cciss/c0d0p2 26 505 1958400 82 Linux swap / Solaris
/dev/cciss/c0d0p3 506 5293 19535040 83 Linux
/dev/cciss/c0d0p4 5294 70265 265085760 83 Linux |
FSTAB:
| Quote: | /dev/cciss/c0d0p1 /boot ext2 noatime 0 1
/dev/cciss/c0d0p3 / reiserfs noatime,notail 0 2
/dev/cciss/c0d0p2 none swap sw,pri=1 0 0
/dev/cciss/c0d0p4 /var reiserfs noatime,notail 0 3
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0 |
lsmod:
| Quote: | livecd / # lsmod
Module Size Used by
ipv6 170912 18
cciss 24196 4
bnx2 65648 0
rtc 7476 0
tg3 88324 0
e1000 90432 0
nfs 85180 0
lockd 41352 1 nfs
sunrpc 99644 2 nfs,lockd
jfs 143340 0
dm_mirror 13008 0
dm_mod 31896 1 dm_mirror
pdc_adma 4868 0
sata_mv 11656 0
ata_piix 8072 0
ahci 11268 0
sata_qstor 4996 0
sata_vsc 4100 0
sata_uli 3204 0
sata_sis 3844 0
sata_sx4 8452 0
sata_nv 4740 0
sata_via 4868 0
sata_svw 3844 0
sata_sil24 8708 0
sata_sil 5384 0
sata_promise 6276 0
libata 61460 15 pdc_adma,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise
sbp2 15364 0
ohci1394 24880 0
ieee1394 53176 2 sbp2,ohci1394
sl811_hcd 8320 0
usbhid 29792 0
ohci_hcd 13572 0
uhci_hcd 15240 0
usb_storage 57280 0
ehci_hcd 19976 0
usbcore 78084 7 sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
|
grub.conf:
| Quote: | # Which listing to boot as default. 0 is the first, 1 the second etc.
default 0
# How many seconds to wait before the default listing is booted.
timeout 3
# Nice, fat splash-image to spice things up 
# Comment out if you don't have a graphics card installed
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title=Gentoo Linux 2.6.23-r8
# Partition where the kernel image (or operating system) is located
root (hd0,0)
kernel /boot/kernel-2.6.23-gentoo-r8 root=/dev/cciss/c0d0p3
|
dmesg:
| Quote: | Linux version 2.6.19-gentoo-r5 (root@kagome) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Tue Apr 3 01:19:22 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe56000 (usable)
BIOS-e820: 00000000cfe56000 - 00000000cfe5e000 (ACPI data)
BIOS-e820: 00000000cfe5e000 - 00000000cfe5f000 (usable)
BIOS-e820: 00000000cfe5f000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000012ffff000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f80
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP (v002 HP ) @ 0x000f4f00
ACPI: XSDT (v001 HP ProLiant 0x00000002 � 0x0000162e) @ 0xcfe567c0
ACPI: FADT (v003 HP ProLiant 0x00000002 � 0x0000162e) @ 0xcfe56840
ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 � 0x0000162e) @ 0xcfe56140
ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0xcfe561c0
ACPI: HPET (v001 HP ProLiant 0x00000002 � 0x0000162e) @ 0xcfe56200
ACPI: SPMI (v005 HP ProLiant 0x00000001 � 0x0000162e) @ 0xcfe56240
ACPI: ERST (v001 HP ProLiant 0x00000001 � 0x0000162e) @ 0xcfe56280
ACPI: MADT (v001 HP ProLiant 0x00000002 0x00000000) @ 0xcfe56480
ACPI: FFFF (v001 HP ProLiant 0x00000001 � 0x0000162e) @ 0xcfe56540
ACPI: BERT (v001 HP ProLiant 0x00000001 � 0x0000162e) @ 0xcfe566c0
ACPI: HEST (v001 HP ProLiant 0x00000001 � 0x0000162e) @ 0xcfe56700
ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20030228) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Detected 3000.138 MHz processor.
Built 1 zonelists. Total pages: 1040384
Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz BOOT_IMAGE=gentoo nox
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3362784k/4194304k available (2604k kernel code, 42208k reserved, 605k data, 248k init, 2488668k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc042a000 - 0xc0468000 ( 248 kB)
.data : 0xc038b370 - 0xc0422b14 ( 605 kB)
.text : 0xc0100000 - 0xc038b370 (2604 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6003.43 BogoMIPS (lpj=30017172)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000940 0004e3bd 00000000 00000001
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.14 BogoMIPS (lpj=30000749)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000940 0004e3bd 00000000 00000001
CPU1: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
Booting processor 2/6 eip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.22 BogoMIPS (lpj=30001102)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000940 0004e3bd 00000000 00000001
CPU2: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
Booting processor 3/7 eip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.21 BogoMIPS (lpj=30001073)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000940 0004e3bd 00000000 00000001
CPU3: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
Total of 4 processors activated (24004.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
migration_cost=281,9689
checking if image is initramfs... it is
Freeing initrd memory: 4711k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:03.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x700-0x71f has been reserved
PCI: Bridge: 0000:0a:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:09:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:09:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: fdf00000-fdffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: 4000-4fff
MEM window: fdd00000-fdefffff
PREFETCH window: d1000000-d10fffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: f8000000-f9ffffff
PREFETCH window: d1100000-d11fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f8000000-f9ffffff
PREFETCH window: d1100000-d11fffff
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: fa000000-fbffffff
PREFETCH window: d1200000-d12fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: fa000000-fbffffff
PREFETCH window: d1200000-d12fffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-3fff
MEM window: f7e00000-f7ffffff
PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:09:00.0 to 64
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0a:00.0 to 64
ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0a:01.0 to 64
ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:0a:02.0 to 64
PCI: Setting latency timer of device 0000:09:00.3 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:04:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
squashfs: version 3.1 (2006/08/19) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler deadline registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[25e2:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:03.0 to 64
pcie_portdrv_probe->Dev[25e3:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[25f8:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
PCI: Setting latency timer of device 0000:00:06.0 to 64
pcie_portdrv_probe->Dev[25f9:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:09:00.0 to 64
pcie_portdrv_probe->Dev[3500:8086] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:09:00.0:pcie10]
Allocate Port Service[0000:09:00.0:pcie11]
PCI: Setting latency timer of device 0000:0a:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:0a:00.0:pcie20]
Allocate Port Service[0000:0a:00.0:pcie21]
PCI: Setting latency timer of device 0000:0a:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:0a:01.0:pcie20]
Allocate Port Service[0000:0a:01.0:pcie21]
PCI: Setting latency timer of device 0000:0a:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:0a:02.0:pcie20]
Allocate Port Service[0000:0a:02.0:pcie21]
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:02.0:pcie01 failed with error 1
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:03.0:pcie01 failed with error 1
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:04.0:pcie01 failed with error 1
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:05.0:pcie01 failed with error 1
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:06.0:pcie01 failed with error 1
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:07.0:pcie01 failed with error 1
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: DW-224E-V, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1654kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Mainboard CPQ0762 detected.
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 248k freed
Time: tsc clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: ImExPS/2 Generic Explorer Mouse as /class/input/input0
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 20
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 20, io base 0x00003800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 4-2: new low speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usb 6-2: new full speed USB device using uhci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
usb 6-2: USB disconnect, address 3
usb 6-2: new full speed USB device using uhci_hcd and address 4
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
usbcore: registered new interface driver hiddev
input: KEYBOARD USB KB as /class/input/input1
input: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.2-2
input: KEYBOARD USB KB as /class/input/input2
input: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.2-2
input: HP Virtual Keyboard as /class/input/input3
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input4
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 2.00 loaded.
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
JFS: nTxBlock = 8192, nTxLock = 65536
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset iso8859-1
Unable to load NLS charset iso8859-1
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.45 (September 29, 2006)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001cc4db12da
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17, node addr 001cc4db12d8
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.45 (September 29, 2006)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001cc4db12da
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17, node addr 001cc4db12d8
HP CISS Driver (v 3.6.10)
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 18 using DAC
blocks= 573367600 block_size= 512
heads=255, sectors=32, cylinders=70266
blocks= 573367600 block_size= 512
heads=255, sectors=32, cylinders=70266
cciss/c0d0: p1 p2 p3 p4
bnx2: eth0 NIC Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ReiserFS: cciss/c0d0p3: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p3: using ordered data mode
ReiserFS: cciss/c0d0p3: journal params: device cciss/c0d0p3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p3: checking transaction log (cciss/c0d0p3)
ReiserFS: cciss/c0d0p3: Using r5 hash to sort names
ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p4: using ordered data mode
ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4)
ReiserFS: cciss/c0d0p4: Using r5 hash to sort names
|
|
|
| Back to top |
|
 |
jmarcus
Apprentice
Joined: 12 Jun 2004
Posts: 197
|
| Posted: Tue Feb 26, 2008 7:12 pm Post subject: |
|
|
no sure if this is still needed. I'm having a similar problem today, but in the past I have always appended my kernel line with doscsi.
| Code: | | kernel /boot/kernel-2.6.23-gentoo-r8 root=/dev/cciss/c0d0p3 doscsi |
Do you need /boot in kernel line? |
|
| Back to top |
|
|
Raposatul
n00b
Joined: 25 Sep 2007
Posts: 53
|
| Posted: Tue Feb 26, 2008 8:18 pm Post subject: |
|
|
tried that and it's not working  |
|
| Back to top |
|
|
Raposatul
n00b
Joined: 25 Sep 2007
Posts: 53
|
| Posted: Wed Feb 27, 2008 6:08 am Post subject: |
|
|
| Anyone please? |
|
| Back to top |
|
|
jmarcus
Apprentice
Joined: 12 Jun 2004
Posts: 197
|
| Posted: Wed Feb 27, 2008 2:31 pm Post subject: |
|
|
Do you want my .config, I got it working.
James |
|
| Back to top |
|
|
taiger
Tux's lil' helper
Joined: 25 Nov 2003
Posts: 112
|
| Posted: Wed Feb 27, 2008 5:03 pm Post subject: |
|
|
| jmarcus wrote: | Do you want my .config, I got it working.
James |
Now I installing a similar HP Server, I'm interesting on this, Can you post .config... please...
Another strange behavior of grub is that TAB auto-completions doesn't seem to work. Any ideas?
Thanks in advance
_________________
http://www.alessandro.vincelli.name |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
