| View previous topic :: View next topic |
| Author |
Message |
Gentree
Veteran
Joined: 30 Jun 2003
Posts: 4585
Location: France, Old Europe
|
 Posted: Mon Feb 18, 2008 9:55 pm Post subject: revdep-rebuild goes unstable |
 |
|
Hi,
I just updated dbus and it warned that I should run revdep-rebuild , so I did.
It found a couple of broken libs, then at [78%] the cpu usage went 100% the temps started going into the red and impossible to kill it.
closing the terminal did not stop it , neither did shutting down X.
ps showed the runaway process to be lddlibc4 which continued to fail to respond to killall and kill -9.
Only solution reboot Not happy. 
It claims to be rewritten version , it is known to be unstable ?
TIA, Gentree. 
_________________
Linux, because I'd rather own a free OS than steal one that's not worth paying for.
KX7-333 , AthlonXP1800+ @2.3GHz
AthlonXP-M on AN7 @ 2.6/2.4GHz (winter/summer)
2.6.20-nicus1 |
|
| Back to top |
|
 |
didymos
Veteran
Joined: 09 Oct 2005
Posts: 4798
Location: California
|
| Posted: Tue Feb 19, 2008 1:23 am Post subject: |
|
|
# equery belongs lddlibc4
[ Searching for file(s) lddlibc4 in *... ]
sys-libs/glibc-2.7-r1 (/usr/bin/lddlibc4)
so, that's probably not revdep-rebuild's fault.
[edit] Well, not directly it's fault.
_________________
Thomas S. Howard |
|
| Back to top |
|
|
Gentree
Veteran
Joined: 30 Jun 2003
Posts: 4585
Location: France, Old Europe
|
| Posted: Tue Feb 19, 2008 2:31 am Post subject: |
|
|
well I just rebuilt glibc and that no longer shows as a stalled process but revdep still shits out 78%.
Crap , time for another reboot. 
This is just like using windows. 
_________________
Linux, because I'd rather own a free OS than steal one that's not worth paying for.
KX7-333 , AthlonXP1800+ @2.3GHz
AthlonXP-M on AN7 @ 2.6/2.4GHz (winter/summer)
2.6.20-nicus1 |
|
| Back to top |
|
|
Gentree
Veteran
Joined: 30 Jun 2003
Posts: 4585
Location: France, Old Europe
|
| Posted: Tue Feb 19, 2008 3:54 am Post subject: |
|
|
OK, after repairing a few holes in my fs I used the old version in /usr/lib/gentoolkit/bin/revdep-rebuild
That managed to get through the job without screwing my system.
Now what was I doing before that time waster ...?
_________________
Linux, because I'd rather own a free OS than steal one that's not worth paying for.
KX7-333 , AthlonXP1800+ @2.3GHz
AthlonXP-M on AN7 @ 2.6/2.4GHz (winter/summer)
2.6.20-nicus1 |
|
| Back to top |
|
|
skellr
Guru
Joined: 17 Jun 2005
Posts: 536
Location: The Village
|
| Posted: Tue Feb 19, 2008 1:06 pm Post subject: |
|
|
Hear anything strange from syslog lately? 
I keep getting this when running revdep-rebuild. might be related.
| Code: | Feb 19 10:48:32 srishti ld-linux.so.2[23557]: segfault at b7f71300 ip b7f79a79 sp bfc8b768 error 7 in ld-2.7.so[b7f73000+1a000]
Feb 19 10:48:32 srishti ld-linux.so.2[23563]: segfault at b8012314 ip b801aa79 sp bff2c208 error 7 in ld-2.7.so[b8014000+1a000] |
_________________
Вопрос остается только один |
|
| Back to top |
|
|
snIP3r
Guru
Joined: 21 May 2004
Posts: 580
Location: germany
|
| Posted: Sun Mar 16, 2008 1:45 pm Post subject: |
|
|
hi!
similar error here:
http://forums.gentoo.org/viewtopic-t-672371-highlight-ldlinux.html
might also be related...
@Gentree i also tried to find an old version of revdep-rebuidl at the location you posted. but it is not there... is there a way to get this version also (expect emerging an older version of gentoolkit)??
greets
snIP3r
_________________
AMD X2 3800+ on ASUS M2N-SLI Deluxe
Gentoo Base System 1.12.11.1
Kernel 2.6.25-gentoo-r7 SMP x86_64
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
Gentree
Veteran
Joined: 30 Jun 2003
Posts: 4585
Location: France, Old Europe
|
| Posted: Sun Mar 16, 2008 2:37 pm Post subject: |
|
|
http://sources.gentoo.org/viewcvs.py/gentoo-x86/
I saw a message during building the package that said if there were problems the old version was at that location. Maybe you need to install an older gentoolkit first if yours is a recent installation.
Otherwise , why not use an older package if the current one is broken?
_________________
Linux, because I'd rather own a free OS than steal one that's not worth paying for.
KX7-333 , AthlonXP1800+ @2.3GHz
AthlonXP-M on AN7 @ 2.6/2.4GHz (winter/summer)
2.6.20-nicus1 |
|
| Back to top |
|
|
snIP3r
Guru
Joined: 21 May 2004
Posts: 580
Location: germany
|
| Posted: Sun Mar 16, 2008 3:04 pm Post subject: |
|
|
| Gentree wrote: | http://sources.gentoo.org/viewcvs.py/gentoo-x86/
I saw a message during building the package that said if there were problems the old version was at that location. Maybe you need to install an older gentoolkit first if yours is a recent installation.
Otherwise , why not use an older package if the current one is broken?
|
hmmm, ok, i dont think that the package is broken, cause it runs perfect before todays update.
which version do you use exactly?
shouldn't we open a bugreport for this issue?
greets
snIP3r
_________________
AMD X2 3800+ on ASUS M2N-SLI Deluxe
Gentoo Base System 1.12.11.1
Kernel 2.6.25-gentoo-r7 SMP x86_64
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
Gentree
Veteran
Joined: 30 Jun 2003
Posts: 4585
Location: France, Old Europe
|
| Posted: Sun Mar 16, 2008 5:04 pm Post subject: |
|
|
| Code: | bash-3.2#etcat -v gentoolkit
[ Results for search key : gentoolkit
[ Candidate applications found : 7 ]
Only printing found installed programs.
* app-portage/gentoolkit :
[ ] 0.2.0-r3 (0) OVERLAY
[ ] 0.2.3-r1 (0)
[ ~ ] 0.2.3.1 (0)
[ ~ ] 0.2.4_pre7 (0)
[M ] 0.2.4_pre8 (0)
[ ~ ] 0.2.4_rc2 (0)
[ ~I] 0.2.4_rc3 (0)
|
at the time of the above post I was using _rc2 , the previous version that was retained would have come from -pre7
As for bug reports, I have given my need for abuse from those who prefer to flame than to fix thier screw ups. I leave that pleasure to others now.
hope the info is useful.
_________________
Linux, because I'd rather own a free OS than steal one that's not worth paying for.
KX7-333 , AthlonXP1800+ @2.3GHz
AthlonXP-M on AN7 @ 2.6/2.4GHz (winter/summer)
2.6.20-nicus1 |
|
| Back to top |
|
|
snIP3r
Guru
Joined: 21 May 2004
Posts: 580
Location: germany
|
| Posted: Mon Mar 17, 2008 2:44 am Post subject: |
|
|
hi!
even after installing the newest 0.2.4_rc3 gentoolkit i got these errors... i think its time to open a bugreport.
greets
snIP3r
_________________
AMD X2 3800+ on ASUS M2N-SLI Deluxe
Gentoo Base System 1.12.11.1
Kernel 2.6.25-gentoo-r7 SMP x86_64
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
albright
l33t
Joined: 16 Nov 2003
Posts: 900
Location: Near Toronto
|
| Posted: Mon Mar 17, 2008 7:14 am Post subject: |
|
|
that's a **masked** package! I think you should
file a bug report - that's what software testers
are for
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
| Back to top |
|
|
snIP3r
Guru
Joined: 21 May 2004
Posts: 580
Location: germany
|
| Posted: Mon Mar 17, 2008 8:52 am Post subject: |
|
|
| albright wrote: |
that's a **masked** package! I think you should
file a bug report - that's what software testers
are for |
hi albright!
already done: http://bugs.gentoo.org/show_bug.cgi?id=213659
the developers told me that this segfault can be safely ignored...
EDIT: a developer told me to install the 0.2.4_rc3 and run revdep-rebuild with some parameters. take a look at the bugreport... it seems to be fixed!
greets
snIP3r
_________________
AMD X2 3800+ on ASUS M2N-SLI Deluxe
Gentoo Base System 1.12.11.1
Kernel 2.6.25-gentoo-r7 SMP x86_64
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
|
Portage & Programming
