| View previous topic :: View next topic |
| Author |
Message |
infernus
n00b
Joined: 11 Jan 2008
Posts: 24
Location: US
|
 Posted: Sat Jan 19, 2008 3:24 am Post subject: More wpa_supplicant woes... madwifi issue [SOLVED] |
 |
|
First off, thanks a lot to everyone who helped out with the network module error I made. wpa_supplicant starts up just fine at boot now. There is one problem, though. I can't seem to figure out why, but it seems if I don't maintain some sort of connection, the router seems to stop forwarding requests after a short period. I have to reset the connection before it will work again.. I wonder if sending some sort of keep-alive packet might help (but that should not be necessary)?
Anyway, here is my /etc/wpa_supplicant/wpa_supplicant.conf:
| Code: | # The below line not be changed otherwise we refuse to work
ctrl_interface=/var/run/wpa_supplicant
# Ensure that only root can read the WPA configuration
ctrl_interface_group=wheel
# Let wpa_supplicant take care of scanning and AP selection
ap_scan=2
# Other shit
eapol_version=1
fast_reauth=1
############################
# Networks #
############################
# OTIS!
network={
ssid="Otis Dick"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk=*snip*
priority=5
} |
and here is my /etc/conf.d/net:
| Code: | modules=( "wpa_supplicant" "udhcpc" )
wpa_supplicant_ath0="-Dmadwifi"
config_ath0=( "dhcp" )
udhcpc_ath0="-q"
dhcp_ath0=( "nontp" )
config_eth0=( "dhcp" )
udhcpc_eth0="-q" |
Is there any way I can have it stay connected the whole time without reconnecting? I don't think I messed anything up this time..  Thanks in advance for your help.
_________________
--
Sal.
Linux latitude 2.6.25-hardened-r4 #1 SMP Sat Aug 23 15:23:14 EDT 2008 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux
Last edited by infernus on Sat Jan 19, 2008 2:47 pm; edited 2 times in total |
|
| Back to top |
|
 |
infernus
n00b
Joined: 11 Jan 2008
Posts: 24
Location: US
|
| Posted: Sat Jan 19, 2008 3:57 am Post subject: |
|
|
Sorry about the wait but I got some debugging output from wpa_supplicant.. It's a lot. (Hope it helps):
| Code: | satellite ~ # wpa_supplicant -i ath0 -D madwifi -c /etc/wpa_supplicant/wpa_supplicant.conf -d
Initializing interface 'ath0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wheel' (DEPRECATED)
ap_scan=2
eapol_version=1
fast_reauth=1
Priority group 5
id=0 ssid='Otis Dick'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=13 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:90:96:cb:6d:71
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_set_countermeasures: enabled=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
ctrl_interface_group=10 (from group name 'wheel')
Added interface ath0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
Ignore event for foreign ifindex 4
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'Otis Dick'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_madwifi_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 414 bytes of scan results (2 BSSes)
Scan results: 2
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:11:50:d8:3e:ae
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:11:50:d8:3e:ae
No keys have been configured - skip key clearing
Network configuration found for the current AP
WPA: Using WPA IE from AssocReq to set cipher suites
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Associated with 00:11:50:d8:3e:ae
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RX EAPOL from 00:11:50:d8:3e:ae
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 3e
key_nonce - hexdump(len=32): e7 a7 bc 33 8c 0a 8d 5e 71 27 02 42 12 09 95 ea 1e 39 f9 c1 1e ad 88 34 5a 63 db 6d 54 ac 28 31
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 61 78 2d 61 67 65 3d 36
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:11:50:d8:3e:ae (ver=2)
WPA: Renewed SNonce - hexdump(len=32): 6f c7 f4 e7 31 d8 e2 02 4b 30 71 4b f6 55 79 39 5f 57 79 0e 26 bc 25 91 0b 18 25 77 bc 6c 4b 58
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:11:50:d8:3e:ae
IEEE 802.1X RX: version=1 type=3 length=119
EAPOL-Key type=254
key_info 0x1ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
key_length=16 key_data_length=24
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 3f
key_nonce - hexdump(len=32): e7 a7 bc 33 8c 0a 8d 5e 71 27 02 42 12 09 95 ea 1e 39 f9 c1 1e ad 88 34 5a 63 db 6d 54 ac 28 31
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): bd 08 0a ea a6 ec 12 14 0e 1f ad 3e ca e0 73 11
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from 00:11:50:d8:3e:ae (ver=2)
WPA: IE KeyData - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: No WPA/RSN IE for this AP known. Trying to get from scan results
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: Found the current AP from updated scan results
WPA: Sending EAPOL-Key 4/4
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_madwifi_set_key: alg=CCMP key_idx=0 set_tx=1 seq_len=6 key_len=16
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RX EAPOL from 00:11:50:d8:3e:ae
IEEE 802.1X RX: version=1 type=3 length=119
EAPOL-Key type=254
key_info 0x392 (ver=2 keyidx=1 rsvd=0 Group Ack MIC Secure)
key_length=16 key_data_length=24
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 40
key_nonce - hexdump(len=32): 7c 1c 12 ea c6 8a 35 c4 d5 31 21 23 7f 7f f9 ff be 83 56 3e e3 39 88 25 e4 ac ff 8f 41 f4 5f 7e
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): a0 02 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): de 94 17 16 ec 2f d3 8e f8 44 d5 2d 20 58 f2 9c
WPA: RX message 1 of Group Key Handshake from 00:11:50:d8:3e:ae (ver=2)
State: GROUP_HANDSHAKE -> GROUP_HANDSHAKE
WPA: Group Key - hexdump(len=16): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0).
WPA: RSC - hexdump(len=6): a0 02 00 00 00 00
wpa_driver_madwifi_set_key: alg=CCMP key_idx=1 set_tx=0 seq_len=6 key_len=16
WPA: Sending EAPOL-Key 2/2
WPA: Key negotiation completed with 00:11:50:d8:3e:ae [PTK=CCMP GTK=CCMP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:11:50:d8:3e:ae completed (auth) [id=0 id_str=]
wpa_driver_wext_set_operstate: operstate 0->1 (UP)
WEXT: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
EAPOL: startWhen --> 0
RTM_NEWLINK: operstate=1 ifi_flags=0x1043 ([UP][RUNNING])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 00:11:50:d8:3e:ae into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_del_key: keyidx=0
State: COMPLETED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 1->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'Otis Dick'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_madwifi_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'Otis Dick'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_madwifi_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'Otis Dick'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_madwifi_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
*This is where I hit ctrl-c*
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface ath0
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=0
wpa_driver_madwifi_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Removed BSSID 00:11:50:d8:3e:ae from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6 |
I can't figure out why it blacklisted my router. Any ideas? Thanks again.
_________________
--
Sal.
Linux latitude 2.6.25-hardened-r4 #1 SMP Sat Aug 23 15:23:14 EDT 2008 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux |
|
| Back to top |
|
|
infernus
n00b
Joined: 11 Jan 2008
Posts: 24
Location: US
|
| Posted: Sat Jan 19, 2008 4:11 am Post subject: |
|
|
One more thing.. I'm not sure if I already mentioned the fact that it still appears as if it's connected, but after a while it just doesn't connect to anything anymore even though I still have an IP and it still appears to be up.. I wonder what this 00:00:00... is in there for? Right here:
| Code: | Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 00:11:50:d8:3e:ae into blacklist |
I'll try and post some dmesg output if I can find any.... Thanks again.......
_________________
--
Sal.
Linux latitude 2.6.25-hardened-r4 #1 SMP Sat Aug 23 15:23:14 EDT 2008 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux |
|
| Back to top |
|
|
infernus
n00b
Joined: 11 Jan 2008
Posts: 24
Location: US
|
| Posted: Sat Jan 19, 2008 6:31 am Post subject: |
|
|
Wow, after many hours of researching on google and various sites I believe I have found the solution. Apparently, there is some sort of bug(?) in the madwifi drivers that prevents ap_scan=2 from working properly with wpa_supplicant. I changed it to ap_scan=1 and so far so good... I'll leave it on overnight and try to check my email in the morning. Cross your fingers
_________________
--
Sal.
Linux latitude 2.6.25-hardened-r4 #1 SMP Sat Aug 23 15:23:14 EDT 2008 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux |
|
| Back to top |
|
|
infernus
n00b
Joined: 11 Jan 2008
Posts: 24
Location: US
|
| Posted: Sat Jan 19, 2008 2:46 pm Post subject: |
|
|
That was definitely the problem. To anyone with wpa_supplicant and madwifi:
DO NOT USE ap_scan=2 in your wpa_supplicant.conf. Use ap_scan=1 instead.
ap_scan=2 will cause all sorts of connection issues. Unless you like reconnecting every couple minutes, use ap_scan=1.
Here is my wpa_supplicant.conf:
| Code: | # The below line not be changed otherwise we refuse to work
ctrl_interface=/var/run/wpa_supplicant
# Ensure that only root can read the WPA configuration
ctrl_interface_group=0
# Let wpa_supplicant take care of scanning and AP selection
ap_scan=1
# Other shit
eapol_version=1
fast_reauth=1
############################
# Networks #
############################
# OTIS!
network={
ssid="Otis Dick"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk=*snip*
priority=5
} |
wpa_supplicant -i ath0 -D madwifi -c /etc/wpa_supplicant/wpa_supplicant.conf works just fine for me now. Hope that might help anyone else with the problem..
_________________
--
Sal.
Linux latitude 2.6.25-hardened-r4 #1 SMP Sat Aug 23 15:23:14 EDT 2008 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
