| View previous topic :: View next topic |
| Author |
Message |
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
 Posted: Wed Jun 25, 2003 10:02 am Post subject: Hd da buttare? |
 |
|
1 Time(s): end_request: I/O error, dev 16:00 (hdc), sector 7975468
1 Time(s): end_request: I/O error, dev 16:00 (hdc), sector 7975470
1 Time(s): hdc: dma_intr: error=0x40 { UncorrectableError }, LBAsect=7975471, sector=7975468
1 Time(s): hdc: dma_intr: error=0x40 { UncorrectableError }, LBAsect=7975471, sector=7975470
2 Time(s): hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Da qualche giorno il Logwatch mi ricorda che questo hd (di backup) fa questi numeri qui sopra...
Lo butto?
Mi dite qualche prog per monitorare lo SMART?
P.S.: non è il Samsung sfigato di cui ho parlato nel post precedente... questo è un IBM 30G di 3 anni.
ByEZz,
Paolo
_________________
Nihil sine magno labore |
|
| Back to top |
|
 |
shev
Bodhisattva
Joined: 03 Feb 2003
Posts: 4084
Location: Italy
|
| Posted: Wed Jun 25, 2003 10:24 am Post subject: |
|
|
Bhe, gli errori non sembrano molto incoraggianti, ma da qui a buttare l'hd...
Dando un emerge -s smart ho trovato questi due pacchetti:
app-admin/ide-smart : A tool to read SMART information from harddiscs
sys-apps/smartmontools : control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.)
Il secondo credo sia quello che fa al caso tuo, tra l'altro se non ricordo male devo pure averlo usato una volta (con debian). Per maggiori info http://smartmontools.sourceforge.net/.
Cmq se trovi che solo qualche settore è danneggiato mi risulta sia possibile isolarli e non utilizzarli, evitando così di buttare tutto. Certo, non farei molto affidamento su questo hd, però meglio che non averlo  |
|
| Back to top |
|
|
bsolar
Bodhisattva
Joined: 12 Jan 2003
Posts: 2764
|
| Posted: Wed Jun 25, 2003 10:28 am Post subject: Re: Hd da buttare? |
|
|
| paolo wrote: | | P.S.: non è il Samsung sfigato di cui ho parlato nel post precedente... questo è un IBM 30G di 3 anni. |
Uhm io farei valere la garanzia, se era garantito 5 anni, l'unico problema è spedirlo in Irlanda (se ricordo bene).
_________________
I may not agree with what you say, but I'll defend to the death your right to say it. |
|
| Back to top |
|
|
Legolas80
Tux's lil' helper
Joined: 05 Jun 2003
Posts: 128
|
| Posted: Wed Jun 25, 2003 11:02 am Post subject: |
|
|
Io ho mandato un IBM da 40GB in Olanda e dopo un mese me ne hanno spedito 1 nuovo
Però la garanzia era di 3 anni (il mio si è rotto dopo un anno). |
|
| Back to top |
|
|
mrfree
Veteran
Joined: 15 Mar 2003
Posts: 1303
Location: Europe.Italy.Sulmona
|
| Posted: Wed Jun 25, 2003 3:13 pm Post subject: |
|
|
il mio IBM Deskstar si è fatto un viaggetto in Olanda presso il centro di raccolta di Hitachi Europe (che ha di recente assorbito il settore storage di IBM). Dopo soli 4/5 gg lavorativi mi hanno mandato un HDD nuovo nuovo ancora imballato
Se ti può interessare la spedizione è avvenuta tramite PostaCelere che ha consegnato, con mio immenso stupore, in 1 giorno e pensare che ho anche pagato circa 10 euro in meno rispetto al MBE.
_________________
Please EU, pimp my country!
ICE: /etc/init.d/iptables panic |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Wed Jun 25, 2003 7:21 pm Post subject: |
|
|
hdc: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(66)
ErrataCorrige: E' un 40G di un anno e mezzo fa.
Ora faccio informare chi di dovere su quanto dura la garanzia.
Ho anche installato le smartmontools ma penso che prima di caricare il demone dovrò dare una letta al file di conf 
ByEZz,
Paolo
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
mrfree
Veteran
Joined: 15 Mar 2003
Posts: 1303
Location: Europe.Italy.Sulmona
|
| Posted: Thu Jun 26, 2003 6:03 am Post subject: |
|
|
| Quote: | | Ora faccio informare chi di dovere su quanto dura la garanzia. |
vai su http://www.hgst.com/ inserisci il serial number e verifica se l'hd IBM è ancora in garanzia.
_________________
Please EU, pimp my country!
ICE: /etc/init.d/iptables panic |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Thu Jun 26, 2003 12:07 pm Post subject: |
|
|
Ottimo sito ma mi da "Invalid serial" 
Quei hd (2 identici: hda e hdc sulla stessa macchina) vengono da essedishop.
E' stata mandata una mail.
Appena ho tempo mi informo dell'upgrade del firmware.
ByEZz,
Paolo
_________________
Nihil sine magno labore
Last edited by paolo on Thu Jun 26, 2003 12:23 pm; edited 1 time in total |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Thu Jun 26, 2003 12:18 pm Post subject: smartctl -a /dev/hda |
|
|
| Code: | # smartctl -a /dev/hda
smartctl version 5.1-14 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IC35L040AVER07-0
Serial Number: SXPTX291095
Firmware Version: ER4OA45A
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Thu Jun 26 15:17:30 2003 CEST
==> WARNING: IBM Deskstar 60GXP drives may need upgraded SMART firmware.
Please see http://www.geocities.com/dtla_update/index.html#rel
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x00) Offline data collection activity was
never started.
Auto Off-line Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete off-line
data collection: (1383) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 1
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 108 108 024 Pre-fail Always - 203 (Average 204)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 78
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 9242
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 78
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 78
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 78
194 Temperature_Celsius 0x0002 127 127 000 Old_age Always - 43 (Lifetime Min/Max 19/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log, version number 1
No self-tests have been logged |
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Thu Jun 26, 2003 12:20 pm Post subject: smartctl -a /dev/hdc |
|
|
| Code: | # smartctl -a /dev/hdc
smartctl version 5.1-14 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IC35L040AVER07-0
Serial Number: SXPTXQ25604
Firmware Version: ER4OA45A
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Thu Jun 26 15:18:10 2003 CEST
==> WARNING: IBM Deskstar 60GXP drives may need upgraded SMART firmware.
Please see http://www.geocities.com/dtla_update/index.html#rel
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x00) Offline data collection activity was
never started.
Auto Off-line Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete off-line
data collection: (1383) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 105 105 024 Pre-fail Always - 210 (Average 208)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 83
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 3
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 13403
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 83
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 83
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 83
194 Temperature_Celsius 0x0002 127 127 000 Old_age Always - 43 (Lifetime Min/Max 16/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 20
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
DCR = Device Control Register
FR = Features Register
SC = Sector Count Register
SN = Sector Number Register
CL = Cylinder Low Register
CH = Cylinder High Register
D/H = Device/Head Register
CR = Content written to Command Register
ER = Error register
STA = Status register
Timestamp is seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
Error 11 occurred at disk power-on lifetime: 13392 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER:40 SC:01 SN:2f CL:b2 CH:79 D/H:e0 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
00 00 02 2e b2 79 e0 c8 837579.400
00 00 04 2c b2 79 e0 c8 837574.500
00 00 04 28 b2 79 e0 c8 837574.500
00 00 04 24 b2 79 e0 c8 837574.500
00 00 04 20 b2 79 e0 c8 837574.500
Error 10 occurred at disk power-on lifetime: 13392 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER:40 SC:01 SN:2f CL:b2 CH:79 D/H:e0 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
00 00 04 2c b2 79 e0 c8 837574.500
00 00 04 28 b2 79 e0 c8 837574.500
00 00 04 24 b2 79 e0 c8 837574.500
00 00 04 20 b2 79 e0 c8 837574.500
00 00 04 1c b2 79 e0 c8 837574.500
Error 9 occurred at disk power-on lifetime: 13368 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER:40 SC:01 SN:2f CL:b2 CH:79 D/H:e0 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
00 00 02 2e b2 79 e0 c8 751058.800
00 00 04 2c b2 79 e0 c8 751053.900
00 00 04 28 b2 79 e0 c8 751053.900
00 00 04 24 b2 79 e0 c8 751053.900
00 00 04 20 b2 79 e0 c8 751053.900
Error 8 occurred at disk power-on lifetime: 13368 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER:40 SC:01 SN:2f CL:b2 CH:79 D/H:e0 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
00 00 04 2c b2 79 e0 c8 751053.900
00 00 04 28 b2 79 e0 c8 751053.900
00 00 04 24 b2 79 e0 c8 751053.900
00 00 04 20 b2 79 e0 c8 751053.900
00 00 04 1c b2 79 e0 c8 751053.900
Error 7 occurred at disk power-on lifetime: 13344 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER:40 SC:01 SN:2f CL:b2 CH:79 D/H:e0 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
00 00 02 2e b2 79 e0 c8 664548.500
00 00 04 2c b2 79 e0 c8 664542.600
00 00 04 28 b2 79 e0 c8 664542.600
00 00 04 24 b2 79 e0 c8 664542.600
00 00 04 20 b2 79 e0 c8 664542.600
SMART Self-test log, version number 1
No self-tests have been logged |
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
|
Forum italiano (Italian)
