Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Synaptics on Medion Laptop -- ugh...
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Sat Jan 10, 2009 9:16 pm    Post subject: Synaptics on Medion Laptop -- ugh... Reply with quote

I've been working without my touchpad for a while now. The last time the touchpad worked was kernel 2.6.18-r5 ... a long long time ago...

I'm revisiting this problem, hoping to solve it and make my little lappy fully functional

here's my xorg.conf
Quote:
papapenguin ~ # cat /root/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer" "Synaptics"
InputDevice "Touchpad" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection

Section "Module"
Load "extmod"
Load "dbe"
Load "record"
Load "xtrap"
Load "dri"
Load "glx"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
#Identifier "Mouse0"
#Driver "Synaptics
#Driver "mouse"
#Option "Protocol" "auto"
#Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5 6 7"
Driver "synaptics"
Identifier "TouchPad"
Option "Device" "/dev/input/mouse1"
Option "Protocol" "auto-dev"

EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
#Option "Overlay" # [<str>]
#Option "TransparencyKey" # [<str>]
#Option "ForceInit" # [<bool>]
#Option "DisableXVMC" # [<bool>]
#Option "DisableTile" # [<bool>]
#Option "DisableCOB" # [<bool>]
#Option "BCIforXv" # [<bool>]
#Option "DVI" # [<bool>]
#Option "BusType" # [<str>]
#Option "DmaType" # [<str>]
#Option "DmaMode" # [<str>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
Identifier "Card0"
Driver "savage"
VendorName "S3 Inc."
BoardName "VT8375 [ProSavage8 KM266/KL266]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

papapenguin ~ #

here's my xorg log
Quote:

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r5 i686
Current Operating System: Linux papapenguin 2.6.28-gentoo #5 SMP Thu Jan 8 10:39:27 PST 2009 i686
Build Date: 16 December 2008 01:29:20PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 10 11:17:16 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** 3Dfx (generic) [tdfx]"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "TouchPad"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/freefont/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/lib/X11/fonts/freefont/").
(==) Including the default font path built-ins.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/lib/X11/fonts/local/,
/usr/lib/X11/fonts/misc/,
/usr/lib/X11/fonts/75dpi/:unscaled,
/usr/lib/X11/fonts/100dpi/:unscaled,
/usr/lib/X11/fonts/75dpi/,
/usr/lib/X11/fonts/100dpi/,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c5b80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) S3 Inc. VT8375 [ProSavage8 KM266/KL266] rev 0, Mem @ 0xe0000000/0, 0x90000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "savage"

(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"

(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) SAVAGE: driver (version 2.2.1) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(**) SAVAGE(0): videoram = 32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(--) SAVAGE(0): Found 13 modes at this depth:
[10f] 320 x 200, 70Hz
[134] 320 x 240, 72Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
[11e] 640 x 400, 70Hz
[112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[115] 800 x 600, 60Hz, 75Hz, 85Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[17b] 1280 x 768, 60Hz
[16a] 1280 x 960, 60Hz, 85Hz
[11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[13e] 1400 x 1050, 60Hz, 75Hz
[124] 1600 x 1200, 60Hz
(II) SAVAGE(0): My Monitor: Using hsync range of 31.50-48.50 kHz
(II) SAVAGE(0): My Monitor: Using vrefresh range of 50.00-90.00 Hz
(II) SAVAGE(0): My Monitor: Using maximum pixel clock of 63.50 MHz
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (mode clock too high)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using mode "1280x1024" (no mode of this name)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "1024x768"x59.9 56.00 1024 1072 1104 1184 768 771 775 790 +hsync -vsync (47.3 kHz)
(**) SAVAGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) SAVAGE(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(**) SAVAGE(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) SAVAGE(0): Modeline "1024x768"x86.9 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) SAVAGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SAVAGE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) SAVAGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SAVAGE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) SAVAGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SAVAGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(**) SAVAGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) SAVAGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x86.6 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz)
(**) SAVAGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) SAVAGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) SAVAGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz)
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
(**) SAVAGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(**) SAVAGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "320x200"x85.3 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(II) SAVAGE(0): 9348 kB of Videoram needed for 3D; 32768 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 32 depth: 24
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "savage" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0x90000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3156; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xa0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xa0100000
(II) SAVAGE(0): [drm] aperture handle = 0x92000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x3579e000
(II) SAVAGE(0): [drm] Status page mapped at 0xb7efc000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:32,tiledwidthBytes:4096,tiledBufferSize:3145728
(II) SAVAGE(0): bpp:32,widthBytes:4096,BufferSize:3145728
(II) SAVAGE(0): videoRambytes:0x02000000
(II) SAVAGE(0): textureSize:0x014df000
(II) SAVAGE(0): textureSize:0x014df000
(II) SAVAGE(0): textureOffset:0x00b00000
(II) SAVAGE(0): depthOffset:0x00800000,depthPitch:4096
(II) SAVAGE(0): backOffset:0x00500000,backPitch:4096
(II) SAVAGE(0): Reserved back buffer at offset 0x500000
(II) SAVAGE(0): Reserved depth buffer at offset 0x800000
(II) SAVAGE(0): Reserved 21372 kb for textures at offset 0xb00000
(II) SAVAGE(0): Using 511 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Setting up tile and stipple cache:
24 128x128 slots
(==) SAVAGE(0): Backing store disabled
(II) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] frontPitch:0x00001000
(II) SAVAGE(0): [junkers] backbufferSize:0x00300000
(II) SAVAGE(0): [junkers] backOffset:0x00500000
(II) SAVAGE(0): [junkers] backPitch:0x00001000
(II) SAVAGE(0): [junkers] depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers] depthOffset:0x00800000
(II) SAVAGE(0): [junkers] depthPitch:0x00001000
(II) SAVAGE(0): [junkers] textureOffset:0x00b00000
(II) SAVAGE(0): [junkers] textureSize:0x014df000
(II) SAVAGE(0): [junkers] textureSize:0x014df000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] agp:handle:0x00000001
(II) SAVAGE(0): [junkers] agp:offset:0x01000000
(II) SAVAGE(0): [junkers] agp:size:0x01000000
(II) SAVAGE(0): [junkers] agp:map:0x00000000
(II) SAVAGE(0): [junkers] registers:handle:0xe0000000
(II) SAVAGE(0): [junkers] registers:offset:0x00000000
(II) SAVAGE(0): [junkers] registers:size:0x00080000
(II) SAVAGE(0): [junkers] registers:map:0x00000000
(II) SAVAGE(0): [junkers] status:handle:0x3579e000
(II) SAVAGE(0): [junkers] status:offset:0x00000000
(II) SAVAGE(0): [junkers] status:size:0x00001000
(II) SAVAGE(0): [junkers] status:map:0xb7efc000
(II) SAVAGE(0): [junkers] agpTextures:handle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers] agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers] apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:handle:0xa0000000
(II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers] cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers] chipset:0x00000006
(II) SAVAGE(0): [junkers] width:0x00000400
(II) SAVAGE(0): [junkers] height:0x00000300
(II) SAVAGE(0): [junkers] mem:0x02000000
(II) SAVAGE(0): [junkers] cpp:4
(II) SAVAGE(0): [junkers] zpp:4
(II) SAVAGE(0): [junkers] agpMode:1
(II) SAVAGE(0): [junkers] bufferSize:65536
(II) SAVAGE(0): [junkers] frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] backbufferSize:0x00300000
(II) SAVAGE(0): [junkers] backOffset:0x00500000
(II) SAVAGE(0): [junkers] depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers] depthOffset:0x00800000
(II) SAVAGE(0): [junkers] textureOffset:0x00b00000
(II) SAVAGE(0): [junkers] textureSize:0x01400000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000015
(II) SAVAGE(0): [junkers] agpTextureHandle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers] apertureHandle:0x92000000
(II) SAVAGE(0): [junkers] apertureSize:0x05000000
(II) SAVAGE(0): [junkers] aperturePitch:0x00002000
(II) SAVAGE(0): [junkers] statusHandle:0x3579e000
(II) SAVAGE(0): [junkers] statusSize:0x00001000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) Synaptics touchpad driver version 0.99.3
TouchPad no synaptics event device found
(EE) xf86OpenSerial: No Device specified.
(EE) Synaptics driver unable to open device
(EE) PreInit failed for input device "TouchPad"
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device Logitech USB Mouse
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Mouse: always reports core events
(**) Logitech USB Mouse: Device: "/dev/input/event7"
(II) Logitech USB Mouse: Found 3 mouse buttons
(II) Logitech USB Mouse: Found x and y relative axes
(II) Logitech USB Mouse: Configuring as mouse
(**) Logitech USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Mouse" (type: MOUSE)
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)

Quote:
papapenguin ~ # less /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/freefont/".
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard1
papapenguin ~ #

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5565

PostPosted: Sat Jan 10, 2009 9:50 pm    Post subject: Reply with quote

If you are using xorg-server 1.5.3 and evdev you should configure your touchpad
in hal to use synaptics driver.

Having said that, there's still the fact, that your log suggests that your touchpad is not seen.
Start with checking /proc/bus/input/devices and posting the device that you think is your touchpad.
You may also check with hal-device devices listed by 'hal-find-by-capability --capability input'.
Your touchpad should be among them.

If it's missing in the proc file, it's almost certain problem with your kernel configuration,
if it's there, but hal device lacks input.touchpad capability, post full hal-device output
for that device.
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Sat Jan 10, 2009 11:53 pm    Post subject: Reply with quote

well, I don't see it here, so perhaps it is my kernel config.

the problem is that I've gone over the kernel config time and again with what's supposed to be the correct configuration--any ideas about what I'm missing?
Quote:
papapenguin ~ # cat /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=event4
B: EV=21
B: SW=1

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=40001
B: SND=6

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0

I: Bus=0003 Vendor=046d Product=c00c Version=0110
N: Name="Logitech USB Mouse"
P: Phys=usb-0000:00:10.0-2/input0
S: Sysfs=/class/input/input7
U: Uniq=
H: Handlers=mouse1 event7
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

papapenguin ~ #

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Sun Jan 11, 2009 5:52 pm    Post subject: Reply with quote

I configured my kernel as per the synaptics touchpad wiki, I just checked it to make sure that evdev was built in, took out the mac emulation, ran make, copied the kernel -- and it still doesn't show my touchpad -- is there a way to check and see if it's functional at all?
Quote:
papapenguin ~ # cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=event3
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=40001
B: SND=6

I: Bus=0003 Vendor=046d Product=c00c Version=0110
N: Name="Logitech USB Mouse"
P: Phys=usb-0000:00:10.0-2/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=mouse0 event6
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

papapenguin ~ #

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------


Last edited by papapenguin on Sun Jan 11, 2009 6:14 pm; edited 1 time in total
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Sun Jan 11, 2009 6:12 pm    Post subject: Reply with quote

and I'm also not sure that hal has configured it--although I know virtually nothing about hal configuration...
Quote:
papapenguin ~ # hal-find-by-capability --capability input
/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0_logicaldev_input
/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input
/org/freedesktop/Hal/devices/computer_logicaldev_input_2
/org/freedesktop/Hal/devices/computer_logicaldev_input_1
/org/freedesktop/Hal/devices/computer_logicaldev_input_0
/org/freedesktop/Hal/devices/computer_logicaldev_input
/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input
papapenguin ~ #

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
szczerb
Veteran
Veteran


Joined: 24 Feb 2007
Posts: 1634
Location: Poland => Lodz

PostPosted: Sun Jan 11, 2009 6:17 pm    Post subject: Reply with quote

Do this and post output:
Code:
szczerb@nomad ~ $ hal-find-by-capability --capability input.touchpad
/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input
Code:
szczerb@nomad ~ $ hal-find-by-capability --capability input.touchpad | xargs hal-device
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  input.device = '/dev/input/event6'  (string)
  input.x11_options.SHMConfig = 'true'  (string)
  info.capabilities = { 'input', 'input.touchpad' } (string list)
  input.product = 'SynPS/2 Synaptics TouchPad'  (string)
  input.x11_options.MaxTapMove = '2000'  (string)
  linux.sysfs_path = '/sys/class/input/input6/event6'  (string)
  info.category = 'input'  (string)
  info.subsystem = 'input'  (string)
  input.x11_options.VertEdgeScroll = 'true'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'SynPS/2 Synaptics TouchPad'  (string)
  input.x11_options.HorizEdgeScroll = 'true'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)
  input.x11_options.RTCornerButton = '2'  (string)
  input.x11_options.RBCornerButton = '3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  input.x11_options.TapButton1 = '1'  (string)
  linux.subsystem = 'input'  (string)
  linux.device_file = '/dev/input/event6'  (string)
  input.x11_driver = 'synaptics'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5565

PostPosted: Sun Jan 11, 2009 6:22 pm    Post subject: Reply with quote

The problem here is that if the kernel doesn't see the touchpad,
neither will hal and content of /proc/bus/input/devices proves,
that it doesn't.

So, it's most likely problem with kernel config, hal part can be done
only after kernel sees the touchpad.
Back to top
View user's profile Send private message
szczerb
Veteran
Veteran


Joined: 24 Feb 2007
Posts: 1634
Location: Poland => Lodz

PostPosted: Sun Jan 11, 2009 7:36 pm    Post subject: Reply with quote

True...I was being lazy and read just the last post...
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Sun Jan 11, 2009 9:00 pm    Post subject: Reply with quote

right, the previous post listed my hal config...

I think the problem starts right from square one -- the kernel...

any ideas what might be wrong with the kernel config and why it doesn't see the touchpad?

the last kernel that 'saw' the touchpad (when the touchpad actually worked) was 2.6.18-r5 ... a long time ago ...

I configured the next kernel -- 2.6.19-something -- (like I always do) by copying the .config from the working kernel and then make menuconfig to update... that's when I first started having problems ...

http://forums.gentoo.org/viewtopic-t-537050-highlight-papapenguin.html
_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
szczerb
Veteran
Veteran


Joined: 24 Feb 2007
Posts: 1634
Location: Poland => Lodz

PostPosted: Sun Jan 11, 2009 9:12 pm    Post subject: Reply with quote

I suggest doing 'make oldconfig' after copying the config and menuconfig later to tweak things. This way you'll see all the new things. This is important between major versions as options get renamed sometimes...

BTW Why do you use such an old kernel?
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Sun Jan 11, 2009 11:43 pm    Post subject: Reply with quote

I was just referencing the last kernel that worked with my touchpad. Since then I've upgraded the kernel countless times. My current kernel is 2.26-28, the previous one was 2.26-27-r5 or something like that, so I wasn't using an old kernel for the latest upgrade. I usually don't use make oldconfig unless I'm making a kernel revision such as 2.26.27-r5 to 2.26.27-r8 or something.
_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5565

PostPosted: Mon Jan 12, 2009 12:45 am    Post subject: Reply with quote

Well, simply start with 'make menuconfig' and check if
MOUSE_PS2_SYNAPTICS is selected - it looks like
that should be all, though I don't have a touchpad, so just guessing.
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Mon Jan 12, 2009 3:27 am    Post subject: Reply with quote

I looked all through kernel config and couldn't find anything with synaptics in it...

I have evdev and ps/2 and mice and all sorts of things installed, but none have MOUSE_PS2_SYNAPTICS anywhere to be found -- do you know where this is? under drivers? misc hardware?

ok, I found that if I add ps/2 as a module, then it shows up on the kernel build, but I still don't see it in my devices ...[/quote]
_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
szczerb
Veteran
Veteran


Joined: 24 Feb 2007
Posts: 1634
Location: Poland => Lodz

PostPosted: Mon Jan 12, 2009 11:07 am    Post subject: Reply with quote

Enabling PS/2 mouse in input devices should be enough. ALPS and SYNAPTICS options will get autoenabled after that. Enable mouse and show us 'grep SYNAPTICS .config -A 10 -B 10'.
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5565

PostPosted: Mon Jan 12, 2009 12:02 pm    Post subject: Reply with quote

If you use menuconfig, simply search for MOUSE_PS2_SYNAPTICS,
read the displayed help and then it should be obvious, what needs to be enabled.
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Tue Jan 13, 2009 4:48 pm    Post subject: Reply with quote

this is the help menu in menuconfig:
Quote:
CONFIG_MOUSE_PS2:

│ Say Y here if you have a PS/2 mouse connected to your system. This │
│ includes the standard 2 or 3-button PS/2 mouse, as well as PS/2 │
│ mice with wheels and extra buttons, Microsoft, Logitech or Genius │
│ compatible. │
│ │
│ Synaptics, ALPS or Elantech TouchPad users might be interested │
│ in a specialized Xorg/XFree86 driver at: │
│ <http://w1.894.telia.com/~u89404340/touchpad/index.html> │
│ and a new version of GPM at: │
│ <http://www.geocities.com/dt_or/gpm/gpm.html> │
│ to take advantage of the advanced features of the touchpad. │
│ │
│ If unsure, say Y. │
│ │
│ To compile this driver as a module, choose M here: the │
│ module will be called psmouse. │
│ │
│ Symbol: MOUSE_PS2 [=y] │
│ Prompt: PS/2 mouse │
│ Defined at drivers/input/mouse/Kconfig:15 │
│ Depends on: !S390 && INPUT && INPUT_MOUSE │
│ Location: │
│ -> Device Drivers │
│ -> Input device support │
│ -> Generic input layer (needed for keyboard, mouse, ...) (INPUT [=y]) │
│ -> Mice (INPUT_MOUSE [=y]) │
│ Selects: SERIO && SERIO_LIBPS2 && SERIO_I8042 && SERIO_GSCPS2

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Tue Jan 13, 2009 4:58 pm    Post subject: Reply with quote

szczerb, here is the grep command:
Quote:
papapenguin ~ # grep SYNAPTICS .config -A 10 -B 10
papapenguin ~ #

it doesn't look like it yields anything...
_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
szczerb
Veteran
Veteran


Joined: 24 Feb 2007
Posts: 1634
Location: Poland => Lodz

PostPosted: Tue Jan 13, 2009 6:12 pm    Post subject: Reply with quote

ok... the .config file is in your kernel source dir (it holds all settings of your kernel) so either:
Code:
cd /usr/src/linux/
grep SYNAPTICS .config -A 10 -B 10
or:
Code:
grep SYNAPTICS /usr/src/linux/.config -A 10 -B 10
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5565

PostPosted: Tue Jan 13, 2009 9:34 pm    Post subject: Reply with quote

Well, the important part is:
Code:

  │ Symbol: MOUSE_PS2_SYNAPTICS [=y]                                        │ 
  │ Prompt: Synaptics PS/2 mouse protocol extension                         │ 
  │   Defined at drivers/input/mouse/Kconfig:60                             │ 
  │   Depends on: !S390 && INPUT && INPUT_MOUSE && MOUSE_PS2 && EMBEDDED    │ 
  │   Location:                                                             │ 
  │     -> Device Drivers                                                   │ 
  │       -> Input device support                                           │ 
  │         -> Generic input layer (needed for keyboard, mouse, ...) (INPUT │ 
  │           -> Mice (INPUT_MOUSE [=y])                                    │ 
  │             -> PS/2 mouse (MOUSE_PS2 [=y])

If you don't see it, perhaps you forgot to mark EMBEDDED.
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Wed Jan 14, 2009 5:45 pm    Post subject: Reply with quote

ok, thanks szczerb, the grep command with /usr/src/linux was the correct one, which shows that synaptics is enabled...
Quote:
papapenguin ~ # grep SYNAPTICS /usr/src/linux/.config -A 10 -B 10
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
papapenguin ~ #

it's enabled here in the kernel, but doesn't show up in
Quote:
papapenguin ~ # cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd event0 evbug
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1 evbug
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2 evbug
B: EV=21
B: SW=1

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3 evbug
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4 evbug
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5 evbug
B: EV=40001
B: SND=6

I: Bus=0003 Vendor=046d Product=c00c Version=0110
N: Name="Logitech USB Mouse"
P: Phys=usb-0000:00:10.0-2/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=mouse0 event6 evbug
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

papapenguin ~ #

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
papapenguin
l33t
l33t


Joined: 20 Sep 2005
Posts: 694
Location: Bellevue

PostPosted: Tue Feb 03, 2009 11:33 pm    Post subject: Reply with quote

I don't know if this helps, but I just installed KDE-4.2 -- which isn't quite working yet -- at the end of the X verbose message stuff I see
Quote:
TouchPad no synaptics event device found
(EE) xf86OpenSerial: No Device specified.
(EE) Synaptics driver unable to open device
(EE) PreInit failed for input device "Touchpad"

_________________
--------------
Compaq Presario V6120US
AMD Turion 64X2
------------------------
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum