| View previous topic :: View next topic |
| Author |
Message |
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
 Posted: Thu Sep 20, 2007 11:36 am Post subject: po aktualizacji xorg mysz 'nie wraca' |
 |
|
Witam,
mam problem (dla mnie duży problem :)), posiadam zrobione dwa ekrany w ustawieniach nvidii (separate X screens). Jeden to monitor, drugi telewizor. Po aktualizacji xorg'a gdy przesunę mysz na telewizor nie mogę jej z powrotem przesunąć na monitor, pomaga tylko restart Xów. Jest to bardzo uciążliwe, jest na to jakiś sposób?
Oto mój xorg.conf :
| Code: |
Section "ServerLayout"
Identifier "Simple Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 1440 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
FontPath "/usr/lib/X11/fonts/TrueType/"
FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "xtt"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons"
EndSection
Section "Monitor"
Identifier "Samsung"
HorizSync 31.0 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "PANASONIC-TV"
HorizSync 15.0 - 45.0
VertRefresh 48.0 - 61.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "** NVIDIA (generic) [nv]"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT: 1440x900 +0+0"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
|
Oczywiście po aktualizacji xorg przekompilowałem sterownik od myszy.
| Code: |
[ebuild R ] x11-base/xorg-server-1.4-r1 USE="dri hal ipv6 nptl sdl xorg -3dfx -debug -dmx -kdrive -minimal -xprint" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom" VIDEO_CARDS="nv nvidia -amd -apm -ark -chips -cirrus -cyrix -dummy -epson -fbdev -glint -i128 -i740 -i810 (-impact) -imstt -mach64 -mga -neomagic (-newport) -nsc -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -vmware -voodoo -xgi" 0 kB
|
_________________
http://www.koniec-iti.eu |
|
| Back to top |
|
 |
taopai
Apprentice
Joined: 19 Sep 2005
Posts: 287
Location: Warsaw, Poland
|
| Posted: Thu Sep 20, 2007 9:36 pm Post subject: |
|
|
Hej, u mnie po aktualizacji iksy nie odpowiadały na ruch myszą, a:
| Code: | | cat /dev/input/mice |
ewidentnie pokazywało, ze mysz wysyła dane...
W moim przypadku pomogło wywalenie z INPUT_DEVICES "mouse", potem:
| Code: | emerge -uN xorg-x11
emerge --depclean |
następnie dodanie znowu "mouse" do INPUT_DEVICES po czym:
| Code: | emerge -uN xorg-x11
env-update
source /etc/profile |
Może coś ci to pomoże...
Pozdrawiam,
Tao |
|
| Back to top |
|
|
unK
l33t
Joined: 06 Feb 2007
Posts: 769
|
| Posted: Fri Sep 21, 2007 11:25 am Post subject: |
|
|
taopai, na to wystarczy
| Code: | | emerge x11-drivers/xf86-input-mouse -av1 |
|
|
| Back to top |
|
|
taopai
Apprentice
Joined: 19 Sep 2005
Posts: 287
Location: Warsaw, Poland
|
| Posted: Fri Sep 21, 2007 3:19 pm Post subject: |
|
|
| unK wrote: | taopai, na to wystarczy
| Code: | | emerge x11-drivers/xf86-input-mouse -av1 |
|
Może i masz rację, ale ja stosuję metodę "przezorny zawsze ubezpieczony".
Poza tym, jeśli czytasz ze zrozumieniem, zauważysz, że nie sugerowałem żadnej konkretnej metody, a jedynie napisałem co u mnie po updacie było nie tak i jak to rozwiązałem. MSPANC :]
Pozdrawiam,
Tao |
|
| Back to top |
|
|
unK
l33t
Joined: 06 Feb 2007
Posts: 769
|
| Posted: Fri Sep 21, 2007 4:35 pm Post subject: |
|
|
Tak, wiem, napisałem tylko, że można rozwiązać ten problem prościej i szybciej  |
|
| Back to top |
|
|
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
|
| Back to top |
|
|
Dagger
Retired Dev
Joined: 11 Jun 2003
Posts: 765
Location: UK
|
| Posted: Mon Sep 24, 2007 2:41 pm Post subject: |
|
|
po instalacji xorg trzeba przekompilowac wszystkie drivery
Zalezy czego uzywasz
xf86-input-mouse
xf86-input-evdev
xf86-input-touchpad
_________________
95% of all computer errors occur between chair and keyboard (TM)
Join the FSF as an Associate Member!
Post under CC license. |
|
| Back to top |
|
|
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
| Posted: Mon Sep 24, 2007 5:33 pm Post subject: |
|
|
| Dagger wrote: |
po instalacji xorg trzeba przekompilowac wszystkie drivery
|
To już zrobiłem na początku, bo po aktualizacji xorg w ogóle mi myszka nie działała.
_________________
http://www.koniec-iti.eu |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
|
| Back to top |
|
|
|
Polskie forum (Polish)
