Uzzi
n00b
Joined: 22 Apr 2006
Posts: 46
|
 Posted: Thu Apr 05, 2007 7:13 am Post subject: Problemi con l'uscita S-Video |
 |
|
Da un po' di tempo ho molti problemi con l'uscita S-Video del mio Acer TravelMate 290LCI
lspci:
| Code: | 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
|
cat /var/log/Xorg.0.log:
| Code: | If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (800,600)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (800,600)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Size of device LFP (local flat panel) is 1024 x 768
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1024 x 768
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1024x768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level none
(II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
(II) I810(0): VESA VBE DDC read failed
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 16192 kByte
Mode: 30 (640x480) |
Questo significa che la S-Video mi esce solo a 800x600?
Eppure io tempo fa la usai anche 1024x768, mi sa con versioni precedenti dei driver.
Poi altro problemone è che non riesco a passare il segnale in S-Video a Gentoo avviato con Fn+F5, ma solo se dal boot ho attaccato il cavo S-video!
La pressione di Fn+F5 comporta un bloccaggio del pc!
Qualche idea sulla soluzione?Mi romperebbe molto non poter usare al massimo l'uscita S-Video!
Grazie e Buona Pasqua a tutti
Uzzi |
|
Forum italiano (Italian)
