Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[PDA Acer N35] Synchro & co
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
Fabe
n00b
n00b


Joined: 16 Aug 2006
Posts: 25

PostPosted: Tue Mar 20, 2007 4:33 pm    Post subject: [PDA Acer N35] Synchro & co Reply with quote

Bonjour all

Je vais tout d'abord commencer par des excuses publiques... si j'avais reflechi un peu a l'époque, j'aurai cherché un palm+gps plutot qu'un PocketPC :D

Voila quelques semaines que je m'acharne sur tous les how to que je peux trouver pour synchroniser mon pda avec des soft de KDE, (kontact, korganizer, ou autre si nécessaire..)

Je ne sais plus trop ou chercher, donc, je fais appel a vous :)

donc, j'aurai 2 questions:

Est-ce possible et satisfaisant? (j'ai lu énormément de post qui disaient que c'etait pas encore au top)

Est ce que ces systemes remplacent ActiveSync? (en fait, si je ne synchro pas régulierement mon pda (sous win, avec outlook), il ne prends pas en compte les nouveaux rdv, taches, etc... Donc, si ca pouvait remplacer ActiveSync, ce serait le top pour ne plus bouter sur l'OS a fenetres.. )


Pour les renseignements:
Code:

fabe fabe # lsusb
Bus 004 Device 002: ID 046d:c01d Logitech, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 0502:16e3 Acer, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000



Code:

fabe fabe # dmesg
window: dfe00000-dfefffff
  PREFETCH window: cfd00000-dfcfffff
PCI: Bus 2, cardbus bridge: 0000:00:09.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 30000000-33ffffff
  MEM window: 34000000-37ffffff
PCI: Bus 6, cardbus bridge: 0000:00:09.1
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 38000000-3bffffff
  MEM window: 3c000000-3fffffff
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:09.1[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
NTFS driver 2.1.28 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=405.00 Mhz, System=230.00 MHz
radeonfb: PLL min 20000 max 40000
ohci1394: fw-host0: IntEvent: 00030010
ohci1394: fw-host0: irq_handler: Bus reset requested
ohci1394: fw-host0: Cancel request received
ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
ohci1394: fw-host0: SelfID packet 0x807f8952 received
ieee1394: Including SelfID 0x52897f80
ohci1394: fw-host0: SelfID for this node is 0x807f8952
ohci1394: fw-host0: SelfID complete
ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
ieee1394: NodeMgr: Processing reset for host 0
ohci1394: fw-host0: Single packet rcv'd
ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
Non-DDC laptop panel detected
i2c_adapter i2c-2: unable to read EDID block.
ieee1394: send packet at S100: 003c0000 ffc3ffff
ohci1394: fw-host0: Inserting packet for node 0-00:0000, tlabel=0, tcode=0x0, speed=0
ohci1394: fw-host0: Starting transmit DMA ctx=0
ohci1394: fw-host0: IntEvent: 00000001
ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011
ohci1394: fw-host0: Packet sent to node 60 tcode=0xE tLabel=0 ack=0x11 spd=0 data=0x00000000 ctx=0
ieee1394: send packet local: ffc00140 ffc0ffff f0000400
ieee1394: received packet: ffc00140 ffc0ffff f0000400
ieee1394: send packet local: ffc00160 ffc00000 00000000 69b90404
ieee1394: received packet: ffc00160 ffc00000 00000000 69b90404
ieee1394: send packet local: ffc00540 ffc0ffff f0000404
ieee1394: received packet: ffc00540 ffc0ffff f0000404
ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331
ieee1394: received packet: ffc00560 ffc00000 00000000 34393331
ieee1394: send packet local: ffc00940 ffc0ffff f0000408
ieee1394: received packet: ffc00940 ffc0ffff f0000408
ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0
ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0
ieee1394: send packet local: ffc00d40 ffc0ffff f000040c
ieee1394: received packet: ffc00d40 ffc0ffff f000040c
ieee1394: send packet local: ffc00d60 ffc00000 00000000 530d0300
ieee1394: received packet: ffc00d60 ffc00000 00000000 530d0300
ieee1394: send packet local: ffc01140 ffc0ffff f0000410
ieee1394: received packet: ffc01140 ffc0ffff f0000410
ieee1394: send packet local: ffc01160 ffc00000 00000000 c2b57025
ieee1394: received packet: ffc01160 ffc00000 00000000 c2b57025
ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000
ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000
ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000
ieee1394: received packet: ffc01570 ffc00000 00000000 04000000
ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d532570b5c2]
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN154X1 WXGA
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:00.0): ATI Radeon NP
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (75 C)
ibm_acpi: ec object not found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:02.6 disabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 3, 00:03:0d:24:38:d6.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver irda-usb
USB IrDA support registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: FUJITSU MHT2080AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: raw1394: /dev/raw1394 device initialized
Yenta: CardBus bridge found at 0000:00:09.0 [1734:106d]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0210, PCI irq 5
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:09.1 [1734:106d]
Yenta: ISA IRQ mask 0x0210, PCI irq 5
Socket status: 30000006
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 5, io mem 0xdfffb000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 10, io mem 0xdfff8000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 11, io mem 0xdfff9000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 5, io mem 0xdfffa000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usb 4-1: new low speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.2-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
driver ftdi-elan built at 18:02:13 on Mar 17 2007
usbcore: registered new interface driver ftdi-elan
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input5
i2c /dev entries driver
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.6
wbsd: Copyright(c) Pierre Ossman
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input6
intel8x0_measure_ac97_clock: measured 60001 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: SiS SI7012 with ALC655 at 0xe400, irq 10
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
IrCOMM protocol (Dag Brattli)
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
EXT3 FS on hda3, internal journal
ndiswrapper version 1.38 loaded (preempt=yes,smp=no)
ndiswrapper: driver prisma00 (Conexant,07/20/2004, 2.1.25.0) loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ndiswrapper: using IRQ 10
wlan0: ethernet device 00:90:4b:c8:26:15 using NDIS driver: prisma00, version: 0x20119, NDIS version: 0x500, vendor: 'PRISM 802.11g Adapter (3886)', 1260:3886.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
fuse init (API version 7.8)
fuse distribution version: 2.6.3
Adding 514072k swap on /dev/hda2.  Priority:-1 extents:1 across:514072k
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
eth0: Media Link On 100mbps full-duplex
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState   = 0x1f004e0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f004302 (selected caps)
[fglrx] total      GART = 134217728
[fglrx] free       GART = 118222848
[fglrx] max single GART = 118222848
[fglrx] total      LFB  = 134217728
[fglrx] free       LFB  = 119828480
[fglrx] max single LFB  = 119828480
[fglrx] total      Inv  = 0
[fglrx] free       Inv  = 0
[fglrx] max single Inv  = 0
[fglrx] total      TIM  = 0
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 3
usb 2-1: new full speed USB device using ohci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 4


Code:

fabe fabe # lsmod
Module                  Size  Used by
fglrx                 527940  47
fuse                   35604  2
ndiswrapper           145428  0


Code:

fabe fabe # rc-status
Runlevel: default
 acpid                                                                                                                              [ started  ]
 alsasound                                                                                                                          [ started  ]
 bluetooth                                                                                                                          [ started  ]
 coldplug                                                                                                                           [ started  ]
 dbus                                                                                                                               [ started  ]
 hald                                                                                                                               [ started  ]
 local                                                                                                                              [ started  ]
 netmount                                                                                                                           [ started  ]
 sshd                                                                                                                               [ started  ]
 syslog-ng                                                                                                                          [ started  ]
 vixie-cron                                                                                                                         [ started  ]
 vsftpd                                                                                                                             [ started  ]



Sinon, niveau kernel, les options usb gadget, les PPP* sont compilés..

Voila, je ne sais pas si tout peut etre utile mais autant avoir trop que trop peu :) ...



Si quelqu'un a une idee.. :)

Merci :)
Back to top
View user's profile Send private message
lejim
Tux's lil' helper
Tux's lil' helper


Joined: 26 Feb 2007
Posts: 106
Location: France / Chilly Mazarin

PostPosted: Tue Mar 20, 2007 5:58 pm    Post subject: Reply with quote

Je me pose aussi la question étant possesseur d'un HTC P3300, cependant après avoir ( un tout petit peu ) chercher j'ai vu le projet SynCE qui ne permet pas encore de fonctionner avec WMobile5 ( à cause de la connexion RNDIS ) mais les gars bossent dessus.

En gros ce que j'en ai compris c'est c'est que si tu as un truc récent WM5 / 6 bein... çay mort.

Alors si toutefois quelqu'un peux me contredire je suis aussi preneur !
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum