Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ATI radeon Sticky
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5 ... 74, 75, 76  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 7:09 pm    Post subject: Reply with quote

And inquiring minds want to know XFree86.0.log:

Code:

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gaming-r3 i686 [ELF]
Build Date: 20 May 2003
   Before reporting problems, check http://www.XFree86.Org/
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri May 23 08:41:13 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
   XFree86 ANSI C Emulation: 0.2
   XFree86 Video Driver: 0.6
   XFree86 XInput driver : 0.4
   XFree86 Server Extension : 0.2
   XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80001808, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0735 card 0000,0000 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:02:2: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:3: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:02:7: chip 1039,7012 card 1019,0a14 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,0900 card 1019,0a14 rev 90 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5159 card 174b,7112 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x0000b000 - 0x0000bfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xcfe00000 - 0xcfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xbfc00000 - 0xcfcfffff (0x10100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] rev 0, Mem @ 0xc0000000/27, 0xcfef0000/16, I/O @ 0xb800/8, BIOS @ 0xcfec0000/17
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
   [0] -1   0   0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
   [1] -1   0   0xcffff000 - 0xcfffffff (0x1000) MX[B]
   [2] -1   0   0xcfffe000 - 0xcfffefff (0x1000) MX[B]
   [3] -1   0   0xd0000000 - 0xcfffffff (0x0) MX[B]O
   [4] -1   0   0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
   [5] -1   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
   [6] -1   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
   [7] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [8] -1   0   0x0000d800 - 0x0000d83f (0x40) IX[B]
   [9] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [10] -1   0   0x0000ff00 - 0x0000ff0f (0x10) IX[B]
   [11] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
   [1] -1   0   0xcffff000 - 0xcfffffff (0x1000) MX[B]
   [2] -1   0   0xcfffe000 - 0xcfffefff (0x1000) MX[B]
   [3] -1   0   0xd0000000 - 0xcfffffff (0x0) MX[B]O
   [4] -1   0   0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
   [5] -1   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
   [6] -1   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
   [7] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [8] -1   0   0x0000d800 - 0x0000d83f (0x40) IX[B]
   [9] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [10] -1   0   0x0000ff00 - 0x0000ff0f (0x10) IX[B]
   [11] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
   [6] -1   0   0xcffff000 - 0xcfffffff (0x1000) MX[B]
   [7] -1   0   0xcfffe000 - 0xcfffefff (0x1000) MX[B]
   [8] -1   0   0xd0000000 - 0xcfffffff (0x0) MX[B]O
   [9] -1   0   0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
   [10] -1   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
   [11] -1   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
   [12] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [13] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [14] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [15] -1   0   0x0000d800 - 0x0000d83f (0x40) IX[B]
   [16] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [17] -1   0   0x0000ff00 - 0x0000ff0f (0x10) IX[B]
   [18] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.13.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.2
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.1
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 4.0.1
   Module class: XFree86 Video Driver
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 6.4.18
   Module class: XFree86 Video Driver
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   Module class: XFree86 XInput Driver
   ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
   ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
   ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
   ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
   ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
   ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
   ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
   ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
   ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
   ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
   ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
   ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
   ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
   ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
   ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
   ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
   ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
   ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
   ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
   ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
   ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
   ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
   ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
   ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
   ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330/340/350 (A4) 4137,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
   ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
   ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
   ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
   ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
   ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
   ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
   ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
   ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
   ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
   ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
   ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
   ATI Radeon 9200 5960 (AGP), ATI Radeon 9200 5961 (AGP),
   ATI Radeon 9200 5962 (AGP), ATI Radeon 9200 5963 (AGP),
   ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
   ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
   ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
   ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
   ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
   ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon VE/7000 QY (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
   [6] -1   0   0xcffff000 - 0xcfffffff (0x1000) MX[B]
   [7] -1   0   0xcfffe000 - 0xcfffefff (0x1000) MX[B]
   [8] -1   0   0xd0000000 - 0xcfffffff (0x0) MX[B]O
   [9] -1   0   0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
   [10] -1   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
   [11] -1   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
   [12] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [13] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [14] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [15] -1   0   0x0000d800 - 0x0000d83f (0x40) IX[B]
   [16] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [17] -1   0   0x0000ff00 - 0x0000ff0f (0x10) IX[B]
   [18] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
   [6] -1   0   0xcffff000 - 0xcfffffff (0x1000) MX[B]
   [7] -1   0   0xcfffe000 - 0xcfffefff (0x1000) MX[B]
   [8] -1   0   0xd0000000 - 0xcfffffff (0x0) MX[B]O
   [9] -1   0   0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
   [10] -1   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
   [11] -1   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
   [12] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [13] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [14] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [15] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [16] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [17] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [18] -1   0   0x0000d800 - 0x0000d83f (0x40) IX[B]
   [19] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [20] -1   0   0x0000ff00 - 0x0000ff0f (0x10) IX[B]
   [21] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
   [22] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [23] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000

(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "EnablePageFlip" "True"
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon VE/7000 QY (AGP)" (ChipID = 0x5159)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(--) RADEON(0): MMIO registers at 0xcfef0000
(--) RADEON(0): BIOS at 0xcfec0000
(--) RADEON(0): VideoRAM: 65536 kByte (64-bit SDR SDRAM)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.2.0
   ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): Displays Detected: Monitor1--Type 1, Monitor2--Type 0

(II) RADEON(0):
(II) RADEON(0): Primary Display == Type 1
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=15500
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Monitor0: Using hsync range of 31.50-64.30 kHz
(II) RADEON(0): Monitor0: Using vrefresh range of 40.00-150.00 Hz
(II) RADEON(0): Clock range:  12.00 to 350.00 MHz
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
(**) RADEON(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync
(**) RADEON(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) RADEON(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) RADEON(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) RADEON(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) RADEON(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) RADEON(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) RADEON(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) RADEON(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) RADEON(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) RADEON(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) RADEON(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) RADEON(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) RADEON(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) RADEON(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) RADEON(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) RADEON(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) RADEON(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) RADEON(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) RADEON(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) RADEON(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) RADEON(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) RADEON(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) RADEON(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) RADEON(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) RADEON(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) RADEON(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) RADEON(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.1.0
   ABI class: XFree86 Video Driver, version 0.6
(**) RADEON(0): Using AGP 4x mode
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping enabled
(!!) RADEON(0): For information on using the multimedia capabilities
 of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B]
   [1] 0   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
   [2] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [3] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [7] -1   0   0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
   [8] -1   0   0xcffff000 - 0xcfffffff (0x1000) MX[B]
   [9] -1   0   0xcfffe000 - 0xcfffefff (0x1000) MX[B]
   [10] -1   0   0xd0000000 - 0xcfffffff (0x0) MX[B]O
   [11] -1   0   0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
   [12] -1   0   0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
   [13] -1   0   0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
   [14] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
   [15] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
   [16] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
   [17] 0   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [18] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [19] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [20] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [21] -1   0   0x0000d800 - 0x0000d83f (0x40) IX[B]
   [22] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [23] -1   0   0x0000ff00 - 0x0000ff0f (0x10) IX[B]
   [24] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
   [25] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [26] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xc0000000,0x4000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe0959000
(II) RADEON(0): [drm] mapped SAREA 0xe0959000 to 0x40015000
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0735; Card 0x1002/0x5159]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0xe095c000
(II) RADEON(0): [agp] ring handle = 0xd0000000
(II) RADEON(0): [agp] Ring mapped at 0x44477000
(II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x40017000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x44578000
(II) RADEON(0): [agp] AGP texture map handle = 0xd0302000
(II) RADEON(0): [agp] AGP Texture map mapped at 0x44778000
(II) RADEON(0): [drm] register handle = 0xcfef0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB AGP aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for AGP textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7139
(II) RADEON(0): Will use back buffer at offset 0xb58000
(II) RADEON(0): Will use depth buffer at offset 0xe2a000
(II) RADEON(0): Will use 48128 kb for textures at offset 0x1100000
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Dashed Lines
   Scanline Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7133
(**) Option "dpms"
(**) RADEON(0): DPMS enabled

(II) RADEON(0): X context handle = 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 5
(II) RADEON(0): [drm] Initialized kernel agp heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 122000
GetModeLine - hdsp: 1400 hbeg: 1488 hend: 1640 httl: 1880
              vdsp: 1050 vbeg: 1052 vend: 1064 vttl: 1082 flags: 5
GetModeLine - scrn: 0 clock: 122000
GetModeLine - hdsp: 1400 hbeg: 1488 hend: 1640 httl: 1880
              vdsp: 1050 vbeg: 1052 vend: 1064 vttl: 1082 flags: 5
GetModeLine - scrn: 0 clock: 122000
GetModeLine - hdsp: 1400 hbeg: 1488 hend: 1640 httl: 1880
              vdsp: 1050 vbeg: 1052 vend: 1064 vttl: 1082 flags: 5
GetModeLine - scrn: 0 clock: 122000
GetModeLine - hdsp: 1400 hbeg: 1488 hend: 1640 httl: 1880
              vdsp: 1050 vbeg: 1052 vend: 1064 vttl: 1082 flags: 5
GetModeLine - scrn: 0 clock: 122000

GetModeLine - hdsp: 1400 hbeg: 1488 hend: 1640 httl: 1880
              vdsp: 1050 vbeg: 1052 vend: 1064 vttl: 1082 flags: 5


Had to post seperately cause I started my other post on my Windows box :?
Back to top
View user's profile Send private message
sdball
n00b
n00b


Joined: 06 May 2003
Posts: 10
Location: NC

PostPosted: Fri May 23, 2003 8:03 pm    Post subject: ATI Radeon 9200 and SiS 0648 Reply with quote

I'm trying to get 3d acceleration working for my radeon 9200. Unfortunately, I'm not only running into the typical ATI installation hangups but I'm also dealing with an unsupported agp chipset.

I don't have DRI enabled in the kernel, I have agpgart compiled as a module. I have compiled xfree-drm but have not messed with ati-drivers.

Here's the relevant bit of dmesg after running 'insmod agpgart'

Code:

Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported SiS chipset (device id: 0648), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.


X start up fine without agpgart (sans 3d acceleration of course) but if I run 'insmod agpgart agp_try_unsupported=1' then it blanks on start up and requires a hard reset.

Relevant bit from insmod unsupported:

Code:

Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Trying generic SiS routines for device id: 0648
agpgart: AGP aperture is 64M @ 0xe0000000


Has anyone gotten 3d acceleration working with this SiS chipset or am I SOL? I am about to return this motherboard (Abit SR7-8x) because of a bad FDC, is there one that is better supported that I should consider?
Back to top
View user's profile Send private message
BadGuy
n00b
n00b


Joined: 13 May 2003
Posts: 44

PostPosted: Fri May 23, 2003 9:09 pm    Post subject: Reply with quote

Quote:
Now, I don't like the looks of that BIOS checksum, but I would check that you have MTRR compiled into your kernel, cause I don't think you do.


Stu:
I did have MTRR compiled into my kernel I'm confident in that...

Quote:
...seems to mean DRI sould work. Did you add the Section "DRI" stuff to your XF86Config? You have Load glx and Load dri in there too? Tried opengl-update xfree?


Well I did have DRI section in my xfreeconfig also load dri and load glx in there. Also I did opengl-update.

Currently though I'm completely reinstalling gentoo from scratch using gaming sources now and I messed up my partitions before so this is the chance of doing things right the first time ;). I hope I will... [/quote]
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 10:28 pm    Post subject: Reply with quote

sdball,

I have a SiS chipset as well, and do have some acceleration. See above posts.
Back to top
View user's profile Send private message
dodecahedron
n00b
n00b


Joined: 25 May 2003
Posts: 5
Location: Milwaukee, WI, USA

PostPosted: Sun May 25, 2003 6:48 am    Post subject: a howto for radeon <8500 and >=8500! Reply with quote

Okay, after having both a Radeon 7200 and now a 9500 Pro (yeah!) in my machine after my Geforce 3 failed (after less than a year, but I digress), I feel that I am confident enough with my experiences to write a little howto on the subject. This is also my first post on the forums, every other time I needed to find out something, I always just searched for it. However, with the Radeons, I see much confusion and I hope I can clear some of it up. <disclaimer> I only offer my personal experiences, but this hopefully will be found useful by at least someone. <end disclaimer>

Okay, the first thing you need to figure out is which drivers you will be using. As I have no real experience with all-in-wonder cards, I cannot provide info on ati-gatos, but basically, if you're using a pre-8500 radeon, it'll be xfree-drm, and anything newer will use ati-drivers.

Okay, kernel config first.
The rule of thumb here is to NEVER, EVER compile anything dri or drm into the kernel. All of that stuff is too out of date to use on xfree 4.2 or 4.3. Make sure that MTRR support is compiled in. If you're using xfree-drm, definitely compile agpgart support for your chipset as a module(check all chipsets if you're not sure, it won't add to the size AFAIK). If you're using the ati-drivers, this may be unnecessary, depending on your chipset, but when in doubt, do it. Okay, compile your new kernel, build modules, etc.(if you're not yet accustomed to this rigamarole, you will be soon enough :) Then reboot into your new kernel, but don't start x(it'll probably fail and dump you to a console if you do, but that's what we want anyhow). Now, onto driver install.

I'll describe ati-drivers first. Okay, now, from a console(as root):
Code:
emerge ati-drivers

Now, run:
Code:
opengl-update ati
/opt/ati/bin/fglrxconfig

as ati suggests, and the config program is pretty verbose as far as configuration goes, and also very straghtforward, unless you have a multi-mon setup (I do, btw), you can get by with selecting defaults for just about everything. Just set up your resolutions as 654321 or something so you don't end up with 640x480 ugliness on your x server. The ati drivers are easy as pie, so this is pretty much it. Run startx, run glxinfo, and hopefully everything turned out ok. The ati drivers provide their own gart just like the nvidia ones do, and i find it runs faster and better than the kernel one on my kt333, but YMMV. Experiment, test, have fun. That's what linux is all about.

Now, for the pre-8500 folk: (used to be me until ~3 days ago)
You may wish to edit your use flags by adding:
Code:
radeon -sis -3dfx -rage128 -matrix -gamma -i8x0

This saves a little disk space and compile time, but is unnecessary. Now, onto the good stuff:
Code:
emerge xfree-drm

Now, we need to edit /etc/X11/XF86Config. First things first. Anywhere in the file, add the code:
Code:
Section "dri"
Mode 0666
EndSection

to make dri world accessible.
Now, under Section "Device"(in the graphics device section) change the Driver line to read
Code:
Driver "radeon"
. This should be all you need to do in this file, if you have set up your monitor previously, if you have not, running xf86config should set all of this up for you. One more thing,
Code:
opengl-update xfree

to tell the system to use xfree as the gl renderer. Okay, now startx, run glxinfo and glxgears and enjoy! This info is the result of me reading a whole bunch of different posts and hacking it out for a couple hours on my own, so I hope that you a) find it useful and b) it works for you. I would like some feedback concerning mobility chipsets, because I don't have access to one and am curious as to the results therein.
_________________
"In the old west, there was a sign, and it said: Dead or Alive." - George W. Bush
Back to top
View user's profile Send private message
BadGuy
n00b
n00b


Joined: 13 May 2003
Posts: 44

PostPosted: Sun May 25, 2003 5:03 pm    Post subject: Reply with quote

Ok I'm still having problems although the errors are gone direct rendering just won't enable

Code:

LapBox linux-2.4.20-gaming-r3 # lsmod
Module                  Size  Used by    Not tainted
radeon                109508   0  (unused)
agpgart                28152   1  (autoclean)
usbcore                67776   1
bcm4400                28224   1


So it's unused... Don't know why really I have everything enabled and disabled what should be enabled or disabled in my kernel. Also I emerged xfree-drm (otherwise the module wouldn't load obviously) my xf86config should be fine aswell :S (wich hasn't changed since my last post).

Code:

LapBox linux-2.4.20-gaming-r3 # glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 16 tc  1 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x24 16 tc  1 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
0x25 16 tc  1 16  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x26 16 tc  1 16  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x27 16 dc  1 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x28 16 dc  1 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
0x29 16 dc  1 16  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x2a 16 dc  1 16  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None


It just says direct rendering no...

XFree86.0.log
Code:

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gaming-r3 i686 [ELF]
Build Date: 24 May 2003
   Before reporting problems, check http://www.XFree86.Org/
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun May 25 18:47:50 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "monitor"
(**) |   |-->Device "videocard"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 4.0.1
   Module class: XFree86 Video Driver
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 6.4.18
   Module class: XFree86 Video Driver
   ABI class: XFree86 Video Driver, version 0.6
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility M7 LW (AGP) found
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "radeon"
(II) RADEON(0): [drm] drmOpen failed
(EE) RADEON(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7413
(II) RADEON(0): Direct rendering disabled


So uuuh why? it seems to enable it again and then just disable it.... It's all looking weird to me... I honestly have run out of idea's...
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Sun May 25, 2003 5:32 pm    Post subject: Reply with quote

Badguy:

Could you maybe have gatos drivers installed? I think they are supposed to conflict with DRM, but I could be wrong. You seem to be loading the radeon module, and then an at module, which I believe could be gatos? This is sooo confusing, why can't ATI cards just work?

I know this is clutching at straws, but I think you are VERY clost to having it working! It just seems to be failing to load!

Stu
Back to top
View user's profile Send private message
BadGuy
n00b
n00b


Joined: 13 May 2003
Posts: 44

PostPosted: Mon May 26, 2003 6:25 am    Post subject: Reply with quote

Yeah I got it to work it wheren't the gatos drivers (never even heard of those :D) But I think it was nog having DRI compiled in the kernel... All of the sudden it displayed directrendering: yes. Still I don't have many fps :S maybe it was a bit of a mem problem I'll start my lappy up asap to verify it :S

edit:
I must have had to many shrooms last night... Still not working (although I was sooooo sure :S)
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Mon May 26, 2003 8:45 am    Post subject: Reply with quote

@starwars:

It looks like Im using a different radeon driver than you.. mine has Nothing about framebuffer stuff.. when I tried to turn on that option, bad things happened. I do however have FB support in my kernel (for console) but Im pretty sure these are totally unrelated. If you are using the latest 'xfree-drm,' turn off any hints at FB in you XF86config? Im running out of ideas ;(


@everyone else: is there a good radeon driver (m7) that supports DRI AND framebuffer? When I try to turn the option on for framebuffer, xfree gets angry and says my driver doesnt support it... Can I do it through my other card (intel 840 I think) or does that not get used when I use AGP? Im not good with hardware..
_________________
www.manatee.servemp3.com
www.seas.upenn.edu/~bdodson/gina
www.goatse.cx [it will rise again!]
Back to top
View user's profile Send private message
BadGuy
n00b
n00b


Joined: 13 May 2003
Posts: 44

PostPosted: Mon May 26, 2003 12:45 pm    Post subject: Reply with quote

I haven't got frame buffering to work yet neither something more has arisen like using dual display :S got another thread for that though. It seems I have something of gatos but I think that came with drm as I didn't specificly install those gato drivers (I did find a gatos message in my log) I don't think they conflict though...

Btw what does clash is framebuffer support for radeon in you kernel that should be off :wink: but that's already said in this thread.

I'm going to try and download the latest dri drivers for my radeon see if it does something... and hopefully it won't waste my xfree-drm stuff :S
Back to top
View user's profile Send private message
sdball
n00b
n00b


Joined: 06 May 2003
Posts: 10
Location: NC

PostPosted: Mon May 26, 2003 10:39 pm    Post subject: 3d works, but locks up Reply with quote

Woo! Thanks to dodecahedron's instructions I have gotten ati-drivers installed and working on my 9200. Glxgears spits out an fps of ~1700! But if run an 3d application for more than a few seconds the entire xserver, except for the mouse cursor, locks up and requires a hard reboot (control + alt + backspace doesn't even work). I can only get to the moon on the celestia demo :(

Not running 3d apps is stable though.
Back to top
View user's profile Send private message
marvlush
n00b
n00b


Joined: 18 Apr 2003
Posts: 7

PostPosted: Tue May 27, 2003 2:45 am    Post subject: Scha-wing!!! Reply with quote

I just wanted to thank dodecahedron for his easy-to-follow instructions. THough it took me 2 trys to get it working, cuz the initial install had some old AGPGART, XFREE-DRM, and NVIDIA crap. So instead of trying to flush everything out, I used a Microsoft approach and did a clean install of everything.

Basically I just followed dodecahedron instructions for "newer" cards. and It worked with no fuss.

My system is:
CHIPSET: Intel 845GE
CPU: Pentium 4 @2.4GHz
VIDDY CARD: VisionTek Xstasy - Radeon 9500 PRO
XFREE86: 4.3.0
ATI-DRIVERS: 2.9.12

I did compile AGPGART and support for my chipset as a module, but I did NOT load them, so I am using the ATI driver's builtin AGP, and I did NOT emerge XFREE-DRM at all.

For "fglrxconfig" I used the defualt for everything I think.

'glxinfo' and the "/var/log/XFree96.0.log" reports all the goodies are turned on. Except I see that it seems that the drivers detect my RADEON 9500 PRO as a RADEON 9700. I suspect this has something to do with the fact that the 9700 and the 9500 are the same core (R300), so i wont worry too much about it.

'glxgears' = 3894fps KA-POW!!!!!

if anyone is interested in my Xfree86Config file, let me know and I'll post it.

anyone have any option flags i might set in my XFREE86 config file to crank out a few more FPS????

Cheers,
m
Back to top
View user's profile Send private message
marvlush
n00b
n00b


Joined: 18 Apr 2003
Posts: 7

PostPosted: Tue May 27, 2003 2:48 am    Post subject: GLXGEARS Reply with quote

BTW, that was 'glxgears' = 3894fps @ 1600x1200 with 24bit depth.

:twisted: MUAHAHAHA!!!!! Think of all the porn I can watch!!!
Back to top
View user's profile Send private message
ricril
n00b
n00b


Joined: 05 Mar 2003
Posts: 26
Location: New York

PostPosted: Tue May 27, 2003 9:51 am    Post subject: desperate Reply with quote

Guys,

I am a little bit out of ideas here:
I have a Radeon 7000 VE/QY (same as stustill) and a flat panel (Dell 1702FP UltraSharp). I did exactly everything stustill wrote on May 19th (compiling vanilla kernel with MTTR, without DRM, emerging xfree-drm etc....).
When runnig startx I get a black screen with the mouse pointer in the middle. when Ctrl-Alt-Backspace, it says:

Symbol drmGetClient from module /usr/X1156/lib/modules/drivers/radeon_drv.o is unresolved!

If Driver "radeon" is replaced by Driver "vesa" (to have a basic X starting), I have the folowing error message:

(EE) VESA(0): No matching modes
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found


I read a lot of different stuff about ati, and I tried a lot of tweaking during the last week, nothing works... Help!

here's my XF86Config file:
Quote:
# File generated by xf86config.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"

# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "dell101"
Option "XkbLayout" "fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "NetScrollPS/2"
Option "Device" "/dev/mouse"

EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Dell 1702FP"
HorizSync 31-80
VertRefresh 56-76

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection

# Device configured by xf86config:

Section "Device"
Identifier "ATI Radeon 7000"
Driver "radeon"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon 7000"
Monitor "Dell 1702FP"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

Screen "Screen 1"

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection


_________________
Ricril
Back to top
View user's profile Send private message
dodecahedron
n00b
n00b


Joined: 25 May 2003
Posts: 5
Location: Milwaukee, WI, USA

PostPosted: Tue May 27, 2003 2:01 pm    Post subject: Reply with quote

ricril, I noticed you have several things commented out in your XF86Config that probably shouldn't be.
Load "glx"
Load "dri"
Section "DRI"
Mode 0666
EndSection

This *could* be what is causing the problems, because the driver seems to be having issues where it wants to load drm. Just a thought.

sdball, do you have agp fastwrites enabled in your bios? In my experience, fastwrites=system crashes. The performance gain with current hardware is only like 2-3 fps, so it's just WAAAY not worth it.
_________________
"In the old west, there was a sign, and it said: Dead or Alive." - George W. Bush
Back to top
View user's profile Send private message
ricril
n00b
n00b


Joined: 05 Mar 2003
Posts: 26
Location: New York

PostPosted: Tue May 27, 2003 2:35 pm    Post subject: Reply with quote

Thanks for the tip, but doesn't work.
_________________
Ricril
Back to top
View user's profile Send private message
BadGuy
n00b
n00b


Joined: 13 May 2003
Posts: 44

PostPosted: Tue May 27, 2003 3:51 pm    Post subject: Reply with quote

As far as I know gatos drivers are the drivers that support my radeon and these get installed with xfree-drm. So it is impossible for it to make errors with dri as it was made for it. Atleast that's what I understand. It was true it loads gatos drivers but these are the ones that are included in dri thus the xfree-drm package
Back to top
View user's profile Send private message
sdball
n00b
n00b


Joined: 06 May 2003
Posts: 10
Location: NC

PostPosted: Tue May 27, 2003 3:52 pm    Post subject: agp fast writes Reply with quote

Dodecahedron:

Good call! I did indeed have fast writes enabled. Now things are much more stable but still end up crashing before too long. Continuing to use Celestia as an example: I was able to watch the entire demo and then explore the universe for a few minutes; then the screen locked just like before.

The strange thing is that the lockups aren't always the same. Sometimes the screen will freeze and sometimes the monitor will go black (and go into power saving mode, indicating a loss of signal).

I'm at a loss here. I wish I had a spare hd to run windows on so I could verify that the video card was working correctly.
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Tue May 27, 2003 3:58 pm    Post subject: Reply with quote

BadGuy:

Gatos drivers (emerge ati-gatos) are drivers that support TV and stuff on radeon cards, they don't come with xfree-drm. I don't think they help much with 3D performance though.

Stu
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Tue May 27, 2003 3:59 pm    Post subject: Re: desperate Reply with quote

Quote:
/usr/X1156/lib/modules/drivers/radeon_drv.o


Sounds like this file got erased. Check to see if there is a radeon_drv.o in that folder. If not, try getting it from someone with the same version of xfree. I ran into something similar down my path. emerge xfree-drm doesnt (I dont think) bring back this file, but reinstalling X did. You should hopefully be able to grab it from one of us (actuallly, I'll throw it on my server at:
www.manatee.servemp3.com/misc/radeon_drv.o )

[edit]
bizarre.. my path is X11R6, not X1156. I don't know what that means :) anyways, the file's there
_________________
www.manatee.servemp3.com
www.seas.upenn.edu/~bdodson/gina
www.goatse.cx [it will rise again!]
Back to top
View user's profile Send private message
ricril
n00b
n00b


Joined: 05 Mar 2003
Posts: 26
Location: New York

PostPosted: Tue May 27, 2003 4:23 pm    Post subject: Reply with quote

Guy:
Quote:
bizarre.. my path is X11R6, not X1156. I don't know what that means anyways, the file's there

Not bizarre, I'm installing on another machine, so I copy that line "by hand" and made a mistake.
Thanks for your input, I check it right now :D
_________________
Ricril
Back to top
View user's profile Send private message
ricril
n00b
n00b


Joined: 05 Mar 2003
Posts: 26
Location: New York

PostPosted: Tue May 27, 2003 4:29 pm    Post subject: Reply with quote

Guy,

I do have a /usr/X11R6/lib/modules/drivers/radeon_drv.o

I uncommented
Load "glx"
Load "dri"
Section "DRI"
Mode 0666
EndSection
as suggested by Dodecahedron. When starting X, I have a black screen with the mouse pointer. The interresting stuff is that when I Ctrl-Alt-Backspace, I don't have an error message anymore.

What's going on? Should I go ahead and emerge gnome and see what happen?
_________________
Ricril
Back to top
View user's profile Send private message
crowbert
Tux's lil' helper
Tux's lil' helper


Joined: 28 Apr 2003
Posts: 112

PostPosted: Tue May 27, 2003 4:34 pm    Post subject: Reply with quote

If you're getting a black screen and a mouse pointer, then it sounds like X has started. Try launching an xterm. (Use CTRL-ALT-F1 to get to a console, log in, and issue a command like, "xterm -display :0.") Then run glxinfo and glxgears to get an idea of how you're doing. You may have it working fine.
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Tue May 27, 2003 4:43 pm    Post subject: Reply with quote

ricil, have you looked at your /var/log/XF86.0.log ?

note: this is why phpBB needs thread support :)
_________________
www.manatee.servemp3.com
www.seas.upenn.edu/~bdodson/gina
www.goatse.cx [it will rise again!]
Back to top
View user's profile Send private message
ricril
n00b
n00b


Joined: 05 Mar 2003
Posts: 26
Location: New York

PostPosted: Tue May 27, 2003 5:01 pm    Post subject: Reply with quote

Crowbert,
nothing happend when "xterm -display :0." is typed (it hangs without giving the prompt back).

guy,

here is one line of /var/log/XFree86.0.log:

Quote:
(WW) Open APM failed (/dev/apm_bios) (No such a file or directory)


Is it a possible clue?
_________________
Ricril
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page Previous  1, 2, 3, 4, 5 ... 74, 75, 76  Next
Page 4 of 76

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum