| View previous topic :: View next topic |
| Author |
Message |
RobNyc
Tux's lil' helper
Joined: 11 Oct 2005
Posts: 101
Location: NYC
|
 Posted: Thu Dec 22, 2005 7:22 am Post subject: |
 |
|
Host/Kernel/OS "KanotixBox" running Linux 2.6.14-kanotix-6 i686 [ KANOTIX 2005-04 LITE ]
CPU Info Intel Pentium 4 clocked at [ 2999.077 MHz ]
Videocard ATI RV280 [Radeon 9200 PRO] X.Org 6.8.2 [ 1280x1024 @60hz ]
Processes 83 | Uptime 50min | Memory 855.145/1010.24MB | HDD Size 160GB (18%used) | Client X-Chat 2.6.0 | Infobash v2.50rc7
_________________
Thank You |
|
| Back to top |
|
 |
gralves
Guru
Joined: 20 May 2003
Posts: 389
Location: Sao Paulo, Brazil
|
| Posted: Thu Dec 22, 2005 5:06 pm Post subject: |
|
|
I'm having trouble getting this to work:
| Code: |
glxinfo
name of display: :0.0
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 159 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Serial number of failed request: 19
Current serial number in output stream: 20
|
The only error I get on the log is (only relevant info copied):
| Code: |
(--) Chipset ATI Radeon X300 (RV370) 5B60 (PCIE) found
(WW) RADEON(0): Enabling DRM support
*** Direct rendering support is highly experimental for Radeon 9500
*** and newer cards. The 3d mesa driver is not provided in this tree.
*** A very experimental (and incomplete) version is available from Mesa
CVS.
*** Additional information can be found on http://r300.sourceforge.net
*** This message has been last modified on 2005-08-07.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes =
32
|
What am I doing wrong? |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Thu Dec 22, 2005 7:49 pm Post subject: |
|
|
| gralves wrote: | I'm having trouble getting this to work:
| Code: |
glxinfo
name of display: :0.0
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 159 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Serial number of failed request: 19
Current serial number in output stream: 20
|
|
Yeah, I'm not alone 
Got the same issue on a new install and posted the question in the modular xorg thread. No answer unfortunately.
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
thedopefishlives
Tux's lil' helper
Joined: 23 Nov 2005
Posts: 84
|
| Posted: Thu Dec 22, 2005 10:59 pm Post subject: |
|
|
Okay, so I created a thread about this and nobody answered. So I went ahead and tried the latest CVS, following your steps, and I got the exact same results as I did before. Following is the post that I created about it:
| Quote: |
Hey all. With the release of X.org 7.0.0, I decided I was going to make the fairly steep leap up from X.org 6.8.2. I had heard that great progress had been made on the r300 Radeon driver, so I also decided to use it instead of fglrx. I had working DRI with fglrx; now, I got nothin'. The radeon and drm modules both load; X.org does start; but direct rendering is disabled. It appears that the modules are not creating the node /dev/dri/card0. My questions are as follows:
1) Has anyone gotten a relatively recent ATi PCIe card to work with 3D acceleration and the open-source driver on modular X? If so, how?
2) Does anyone know anything about the problem I am getting? How can I fix it?
For reference's sake, I have an AMD64 system running a pure 64-bit Gentoo install, X.org 7.0.0_rc4, and an ATi Radeon Xpress 200M (it is supported by the radeon driver). |
The exact error the log returns is a series of
| Quote: |
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenMinor returns -1023
|
Followed by a series of the same, but drmGetBusid instead of drmOpenMinor. Also, my dmesg shows next to no output from the drm/radeon modules, only a message acknowledging that the drm module loaded.
| Quote: | | Dec 22 17:43:54 snorlax [drm] Initialized drm 1.0.0 20040925 |
Note that it *does* work in 2D-only mode. Please tell me I'm not completely delusional, and that someone did get a PCIe ATI card running with the open-source driver. *crosses fingers* |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Thu Dec 22, 2005 11:19 pm Post subject: |
|
|
| thedopefishlives wrote: | | For reference's sake, I have an AMD64 system running a pure 64-bit Gentoo install, X.org 7.0.0_rc4, and an ATi Radeon Xpress 200M (it is supported by the radeon driver). |
This one is not working with the r300 driver yet. The following post can be found in the dri mail archive.
| Quote: | Well, the XPRESS chips are PCIE, however they do not have discrete
videoram, so they may need additional tweaks to get the DRI working on
them. Unfortunately, we have no documentation on the XPRESS chips. I
suspect there's an issue with where/how you set up the PCIE GART with
integrated chips. You best bet is to run fglrx on it and dump the
registers to see how ati sets the card up. |
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
thedopefishlives
Tux's lil' helper
Joined: 23 Nov 2005
Posts: 84
|
| Posted: Fri Dec 23, 2005 1:39 am Post subject: |
|
|
| infirit: Then that screams "development opportunity" to me If I don't come back, I got lost in the Linux kernel code somewhere. |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Fri Dec 23, 2005 10:15 pm Post subject: |
|
|
| thedopefishlives wrote: | | infirit: Then that screams "development opportunity" to me If I don't come back, I got lost in the Linux kernel code somewhere. |
I saw your question on the list a few minutes ago. Good luck 
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
Iluminatus
Tux's lil' helper
Joined: 13 Nov 2004
Posts: 93
Location: Maia/Portugal
|
| Posted: Sun Dec 25, 2005 9:44 pm Post subject: |
|
|
I've completly forgot a important step.
You need to install first libtxc_dxtn (WARNING :Depending on where you live, you might need a valid license for s3tc in order to be legally allowed to use the external library).
This will give a speedup to S3tc textures, probably more playable game speed.
Please install it first, then Mesa.
It's just unpack; type:
make
make install (as root)
That's all for now... Happy christmas |
|
| Back to top |
|
|
skrionius
n00b
Joined: 15 Nov 2004
Posts: 16
|
| Posted: Mon Dec 26, 2005 9:34 am Post subject: |
|
|
| Iluminatus wrote: | I've completly forgot a important step.
...
This will give a speedup to S3tc textures, probably more playable game speed.
Please install it first, then Mesa.
...
|
Why install it first? Is the order important to make Mesa work better? Does it cause trouble if I install it after? |
|
| Back to top |
|
|
R. Daneel Olivaw
n00b
Joined: 06 Jul 2004
Posts: 47
|
| Posted: Mon Dec 26, 2005 12:15 pm Post subject: |
|
|
i recompiled mesa after installing the s3tc library and the r300_dri.so binary was exactly the same as before.
Addendum: r300_dri.so contains a reference to the s3tc library, i guess you can install the library after mesa and it gets automagically used
Last edited by R. Daneel Olivaw on Mon Dec 26, 2005 9:27 pm; edited 1 time in total |
|
| Back to top |
|
|
Iluminatus
Tux's lil' helper
Joined: 13 Nov 2004
Posts: 93
Location: Maia/Portugal
|
| Posted: Mon Dec 26, 2005 4:58 pm Post subject: |
|
|
You're right, after a little diggin in mesa, i found that if library is not found dri want use it.
If you compile and install it would work well, but i've always compiled first the lib. |
|
| Back to top |
|
|
gralves
Guru
Joined: 20 May 2003
Posts: 389
Location: Sao Paulo, Brazil
|
|
| Back to top |
|
|
lroland
n00b
Joined: 28 Aug 2005
Posts: 32
Location: Copenhagen, Denmark
|
| Posted: Wed Dec 28, 2005 3:15 pm Post subject: |
|
|
| kiwi_uk wrote: | May I suggest changing the line:
cp *.ko /lib/modules/{kernel_version}/kernel/drivers/char/drm
in the kernel module section to:
cp *.ko /lib/modules/`uname -r`/kernel/drivers/char/drm
to make copy and pasting a bit easier.
|
Fixed - I have not used the guide myself for some time (my old installation is working perfectly) so I will perhaps need to check it again to see if it is still working. |
|
| Back to top |
|
|
aj2r
l33t
Joined: 11 Sep 2005
Posts: 705
Location: Granada/Andalucía/España
|
| Posted: Thu Dec 29, 2005 12:27 pm Post subject: |
|
|
Hi! I have an "ATI Radeon Mobility X600 (M24) 3150 (PCIE)" . I emerge Xorg-7.0 and a got the same results before and after follow your steps.
Xorg.0.log
| Quote: |
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.14-gentoo-r4-eclipse i686
Current Operating System: Linux eclipse 2.6.14-gentoo-r4-eclipse #21 SMP PREEMPT Mon Dec 26 17:02:12 CET 2005 i686
Build Date: 26 December 2005
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 29 12:57:36 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) The directory "/usr/lib/X11/fonts/TrueType/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1,/usr/lib/X11/fonts/local/,/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/freefont/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2580 card 103c,3082 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2581 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 103c,3082 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 103c,3082 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 103c,3082 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 103c,3082 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 103c,3082 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 103c,3082 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 103c,3082 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2640 card 103c,3082 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 103c,3082 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 103c,3082 rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,3150 card 103c,3082 rev 00 class 03,00,00 hdr 00
(II) PCI: 0b:00:0: chip 104c,8031 card 5400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 0b:00:2: chip 104c,8032 card 103c,3082 rev 00 class 0c,00,10 hdr 80
(II) PCI: 0b:00:3: chip 104c,8033 card 103c,3082 rev 00 class 01,80,00 hdr 80
(II) PCI: 0b:00:4: chip 104c,8034 card 103c,3082 rev 00 class 08,05,00 hdr 80
(II) PCI: 0b:02:0: chip 10ec,8139 card 103c,3082 rev 10 class 02,00,00 hdr 00
(II) PCI: 0b:03:0: chip 14e4,4320 card 103c,12fa rev 03 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xb0100000 - 0xb01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:30:0), (0,11,13), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 11 I/O range:
[0] -1 0 0x00005000 - 0x00005fff (0x1000) IX[B]
(II) Bus 11 non-prefetchable memory range:
[0] -1 0 0xb0200000 - 0xb02fffff (0x100000) MX[B]
(II) Bus 11 prefetchable memory range:
[0] -1 0 0x50000000 - 0x51ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 12: bridge is at (11:0:0), (11,12,15), BCTRL: 0x0340 (VGA_EN is cleared)
(II) Bus 12 I/O range:
[0] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]
[1] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]
(II) Bus 12 prefetchable memory range:
[0] -1 0 0x50000000 - 0x51ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc M24 1P [Radeon Mobility X600] rev 0, Mem @ 0xc0000000/28, 0xb0100000/16, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xb0206000 - 0xb0207fff (0x2000) MX[B]
[1] -1 0 0xb0209400 - 0xb02094ff (0x100) MX[B]
[2] -1 0 0xb0200000 - 0xb0203fff (0x4000) MX[B]
[3] -1 0 0xb0208000 - 0xb02087ff (0x800) MX[B]
[4] -1 0 0xb0000400 - 0xb00004ff (0x100) MX[B]
[5] -1 0 0xb0000800 - 0xb00009ff (0x200) MX[B]
[6] -1 0 0xb0000000 - 0xb00003ff (0x400) MX[B]
[7] -1 0 0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[9] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[10] -1 0 0x00003c20 - 0x00003c3f (0x20) IX[B]
[11] -1 0 0x00003c40 - 0x00003c4f (0x10) IX[B]
[12] -1 0 0x00003800 - 0x0000387f (0x80) IX[B]
[13] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[14] -1 0 0x00003880 - 0x000038bf (0x40) IX[B]
[15] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[16] -1 0 0x00003c00 - 0x00003c1f (0x20) IX[B]
[17] -1 0 0x000038e0 - 0x000038ff (0x20) IX[B]
[18] -1 0 0x000038c0 - 0x000038df (0x20) IX[B]
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[20] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xb0208800 - 0xb02088ff (0x100) MX[B]
[1] -1 0 0xb0208c00 - 0xb0208cff (0x100) MX[B]
[2] -1 0 0xb0209000 - 0xb02090ff (0x100) MX[B]
[3] -1 0 0xb0204000 - 0xb0205fff (0x2000) MX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xb0206000 - 0xb0207fff (0x2000) MX[B]
[1] -1 0 0xb0209400 - 0xb02094ff (0x100) MX[B]
[2] -1 0 0xb0200000 - 0xb0203fff (0x4000) MX[B]
[3] -1 0 0xb0208000 - 0xb02087ff (0x800) MX[B]
[4] -1 0 0xb0000400 - 0xb00004ff (0x100) MX[B]
[5] -1 0 0xb0000800 - 0xb00009ff (0x200) MX[B]
[6] -1 0 0xb0000000 - 0xb00003ff (0x400) MX[B]
[7] -1 0 0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[9] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[10] -1 0 0x00003c20 - 0x00003c3f (0x20) IX[B]
[11] -1 0 0x00003c40 - 0x00003c4f (0x10) IX[B]
[12] -1 0 0x00003800 - 0x0000387f (0x80) IX[B]
[13] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[14] -1 0 0x00003880 - 0x000038bf (0x40) IX[B]
[15] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[16] -1 0 0x00003c00 - 0x00003c1f (0x20) IX[B]
[17] -1 0 0x000038e0 - 0x000038ff (0x20) IX[B]
[18] -1 0 0x000038c0 - 0x000038df (0x20) IX[B]
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[20] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xb0208800 - 0xb02088ff (0x100) MX[B]
[1] -1 0 0xb0208c00 - 0xb0208cff (0x100) MX[B]
[2] -1 0 0xb0209000 - 0xb02090ff (0x100) MX[B]
[3] -1 0 0xb0204000 - 0xb0205fff (0x2000) MX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xb0206000 - 0xb0207fff (0x2000) MX[B]
[6] -1 0 0xb0209400 - 0xb02094ff (0x100) MX[B]
[7] -1 0 0xb0200000 - 0xb0203fff (0x4000) MX[B]
[8] -1 0 0xb0208000 - 0xb02087ff (0x800) MX[B]
[9] -1 0 0xb0000400 - 0xb00004ff (0x100) MX[B]
[10] -1 0 0xb0000800 - 0xb00009ff (0x200) MX[B]
[11] -1 0 0xb0000000 - 0xb00003ff (0x400) MX[B]
[12] -1 0 0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xb0208800 - 0xb02088ff (0x100) MX[B]
[15] -1 0 0xb0208c00 - 0xb0208cff (0x100) MX[B]
[16] -1 0 0xb0209000 - 0xb02090ff (0x100) MX[B]
[17] -1 0 0xb0204000 - 0xb0205fff (0x2000) MX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[21] -1 0 0x00003c20 - 0x00003c3f (0x20) IX[B]
[22] -1 0 0x00003c40 - 0x00003c4f (0x10) IX[B]
[23] -1 0 0x00003800 - 0x0000387f (0x80) IX[B]
[24] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[25] -1 0 0x00003880 - 0x000038bf (0x40) IX[B]
[26] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[27] -1 0 0x00003c00 - 0x00003c1f (0x20) IX[B]
[28] -1 0 0x000038e0 - 0x000038ff (0x20) IX[B]
[29] -1 0 0x000038c0 - 0x000038df (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 6.5.7
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE), ATI Radeon FireGL (R480) GL 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility X600 (M24) 3150 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xb0206000 - 0xb0207fff (0x2000) MX[B]
[6] -1 0 0xb0209400 - 0xb02094ff (0x100) MX[B]
[7] -1 0 0xb0200000 - 0xb0203fff (0x4000) MX[B]
[8] -1 0 0xb0208000 - 0xb02087ff (0x800) MX[B]
[9] -1 0 0xb0000400 - 0xb00004ff (0x100) MX[B]
[10] -1 0 0xb0000800 - 0xb00009ff (0x200) MX[B]
[11] -1 0 0xb0000000 - 0xb00003ff (0x400) MX[B]
[12] -1 0 0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xb0208800 - 0xb02088ff (0x100) MX[B]
[15] -1 0 0xb0208c00 - 0xb0208cff (0x100) MX[B]
[16] -1 0 0xb0209000 - 0xb02090ff (0x100) MX[B]
[17] -1 0 0xb0204000 - 0xb0205fff (0x2000) MX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[21] -1 0 0x00003c20 - 0x00003c3f (0x20) IX[B]
[22] -1 0 0x00003c40 - 0x00003c4f (0x10) IX[B]
[23] -1 0 0x00003800 - 0x0000387f (0x80) IX[B]
[24] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[25] -1 0 0x00003880 - 0x000038bf (0x40) IX[B]
[26] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[27] -1 0 0x00003c00 - 0x00003c1f (0x20) IX[B]
[28] -1 0 0x000038e0 - 0x000038ff (0x20) IX[B]
[29] -1 0 0x000038c0 - 0x000038df (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xb0206000 - 0xb0207fff (0x2000) MX[B]
[6] -1 0 0xb0209400 - 0xb02094ff (0x100) MX[B]
[7] -1 0 0xb0200000 - 0xb0203fff (0x4000) MX[B]
[8] -1 0 0xb0208000 - 0xb02087ff (0x800) MX[B]
[9] -1 0 0xb0000400 - 0xb00004ff (0x100) MX[B]
[10] -1 0 0xb0000800 - 0xb00009ff (0x200) MX[B]
[11] -1 0 0xb0000000 - 0xb00003ff (0x400) MX[B]
[12] -1 0 0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xb0208800 - 0xb02088ff (0x100) MX[B]
[15] -1 0 0xb0208c00 - 0xb0208cff (0x100) MX[B]
[16] -1 0 0xb0209000 - 0xb02090ff (0x100) MX[B]
[17] -1 0 0xb0204000 - 0xb0205fff (0x2000) MX[B]
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[24] -1 0 0x00003c20 - 0x00003c3f (0x20) IX[B]
[25] -1 0 0x00003c40 - 0x00003c4f (0x10) IX[B]
[26] -1 0 0x00003800 - 0x0000387f (0x80) IX[B]
[27] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[28] -1 0 0x00003880 - 0x000038bf (0x40) IX[B]
[29] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[30] -1 0 0x00003c00 - 0x00003c1f (0x20) IX[B]
[31] -1 0 0x000038e0 - 0x000038ff (0x20) IX[B]
[32] -1 0 0x000038c0 - 0x000038df (0x20) IX[B]
[33] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[34] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
[35] 0 0 0xb01203b0 - 0xb01203bb (0xc) IS[B]
[36] 0 0 0xb01203c0 - 0xb01203df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xb0100000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "RenderAccel" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility X600 (M24) 3150 (PCIE)" (ChipID = 0x3150)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(II) RADEON(0): Video RAM override, using 262144 kB instead of 131072 kB
(**) RADEON(0): VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): PCIE card detected
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- Proprietary
DAC Type -- TVDAC/ExtDAC
TMDS Type -- NONE
DDC Type -- NONE
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=25000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: AUO
(II) RADEON(0): Panel Size from BIOS: 1440x900
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1440x900
(II) RADEON(0): Total number of valid FP mode(s) found: 1
(--) RADEON(0): Virtual size is 1440x900 (pitch 1440)
(**) RADEON(0): *Mode "1440x900": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1440x900" 96.30 1440 1504 1536 1760 900 903 906 912
(**) RADEON(0): Default mode "640x350": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x350" 96.30 640 1504 1536 1760 350 903 906 912
(**) RADEON(0): Default mode "640x400": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x400" 96.30 640 1504 1536 1760 400 903 906 912
(**) RADEON(0): Default mode "720x400": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "720x400" 96.30 720 1504 1536 1760 400 903 906 912
(**) RADEON(0): Default mode "640x480": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 96.30 640 1504 1536 1760 480 903 906 912
(**) RADEON(0): Default mode "800x600": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600" 96.30 800 1504 1536 1760 600 903 906 912
(**) RADEON(0): Default mode "1024x768": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 96.30 1024 1504 1536 1760 768 903 906 912
(**) RADEON(0): Default mode "1152x864": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x864" 96.30 1152 1504 1536 1760 864 903 906 912
(**) RADEON(0): Default mode "832x624": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624" 96.30 832 1504 1536 1760 624 903 906 912
(**) RADEON(0): Default mode "1152x768": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x768" 96.30 1152 1504 1536 1760 768 903 906 912
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xb0100000 - 0xb010ffff (0x10000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xb0206000 - 0xb0207fff (0x2000) MX[B]
[8] -1 0 0xb0209400 - 0xb02094ff (0x100) MX[B]
[9] -1 0 0xb0200000 - 0xb0203fff (0x4000) MX[B]
[10] -1 0 0xb0208000 - 0xb02087ff (0x800) MX[B]
[11] -1 0 0xb0000400 - 0xb00004ff (0x100) MX[B]
[12] -1 0 0xb0000800 - 0xb00009ff (0x200) MX[B]
[13] -1 0 0xb0000000 - 0xb00003ff (0x400) MX[B]
[14] -1 0 0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xb0208800 - 0xb02088ff (0x100) MX[B]
[17] -1 0 0xb0208c00 - 0xb0208cff (0x100) MX[B]
[18] -1 0 0xb0209000 - 0xb02090ff (0x100) MX[B]
[19] -1 0 0xb0204000 - 0xb0205fff (0x2000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[23] 0 0 0x00004000 - 0x000040ff (0x100) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[26] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[27] -1 0 0x00003c20 - 0x00003c3f (0x20) IX[B]
[28] -1 0 0x00003c40 - 0x00003c4f (0x10) IX[B]
[29] -1 0 0x00003800 - 0x0000387f (0x80) IX[B]
[30] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[31] -1 0 0x00003880 - 0x000038bf (0x40) IX[B]
[32] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[33] -1 0 0x00003c00 - 0x00003c1f (0x20) IX[B]
[34] -1 0 0x000038e0 - 0x000038ff (0x20) IX[B]
[35] -1 0 0x000038c0 - 0x000038df (0x20) IX[B]
[36] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
[38] 0 0 0xb01203b0 - 0xb01203bb (0xc) IS[B](OprU)
[39] 0 0 0xb01203c0 - 0xb01203df (0x20) IS[B](OprU)
(II) RADEON(0): Dynamic Clock Scaling Disabled
(II) RADEON(0): BIOS HotKeys Disabled
(WW) RADEON(0): Enabling DRM support
*** Direct rendering support is highly experimental for Radeon 9500
*** and newer cards. The 3d mesa driver is not provided in this tree.
*** A very experimental (and incomplete) version is available from Mesa CVS.
*** Additional information can be found on http://r300.sourceforge.net
*** This message has been last modified on 2005-08-07.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
........................
drmOpenDevice: node name is /dev/dri/card253
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card254
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) RADEON(0): [drm] drmOpen failed
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1440,8191)
(II) RADEON(0): Reserved area from (0,900) to (1440,902)
(II) RADEON(0): Largest offscreen area available: 1440 x 7289
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 902)
(II) RADEON(0): Largest offscreen area available: 1440 x 7286
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Synaptics touchpad driver version 0.14.2
(--) Mouse1 auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) Mouse1 touchpad found
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "es"
(**) Keyboard1: XkbLayout: "es"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called
(--) Mouse1 touchpad found
Could not init font path element /usr/lib/X11/fonts/local/, removing from list!
SynapticsCtrl called.
SynapticsCtrl called.
|
lspci
| Quote: |
00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 04)
00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]
0b:00.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
0b:00.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
0b:00.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
0b:00.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
0b:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0b:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
|
dmesg
| Quote: |
Linux version 2.6.14-gentoo-r4-eclipse (root@eclipse) (gcc versión 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7. ) #21 SMP PREEMPT Mon Dec 26 17:02:12 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003fef9000 (ACPI data)
BIOS-e820: 000000003fef9000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7a70
On node 0 totalpages: 261872
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32496 pages, LIFO batch:15
DMI present.
ACPI: RSDP (v000 HP ) @ 0x000f79c0
ACPI: RSDT (v001 HP 3082 0x06040000 LTP 0x00000000) @ 0x3fef1a59
ACPI: FADT (v001 HP 3082 0x06040000 PTL 0x00000003) @ 0x3fef8ec0
ACPI: MCFG (v001 HP 3082 0x06040000 LTP 0x00000000) @ 0x3fef8f34
ACPI: MADT (v001 HP 3082 0x06040000 LTP 0x00000000) @ 0x3fef8f70
ACPI: BOOT (v001 HP 3082 0x06040000 LTP 0x00000001) @ 0x3fef8fd8
ACPI: DSDT (v001 HP 3082 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 video=vesafb:ywrap,mttr,pmipal,1440x900-32@60 splash=silent,fadein,theme:eclipse quiet CONSOLE=/dev/tty1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3192.617 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033804k/1047488k available (2024k kernel code, 12660k reserved, 607k data, 204k init, 129984k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6394.22 BogoMIPS (lpj=12788456)Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring handled by SMI
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6384.79 BogoMIPS (lpj=12769583)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Total of 2 processors activated (12779.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 452k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 11 14 15) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *7
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Bridge: 0000:00:01.0
IO window: 4000-4fff
MEM window: b0100000-b01fffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 12, cardbus bridge: 0000:0b:00.0
IO window: 00005400-000054ff
IO window: 00005800-000058ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-5fff
MEM window: b0200000-b02fffff
PREFETCH window: 50000000-51ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1135858762.964:1): initialized
highmem bounce pool size: 64 pages
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Device 0000:00:1c.0 not available because of resource collisions
Real Time Clock Driver v1.12
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
vesafb: unrecognized option mttr
vesafb: ATI Technologies Inc., P24 , 01.00 (OEM: ATI MOBILITY RADEON X600 )
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5719
vesafb: pmi: set display start = c00c5787, set palette = c00c57c1
vesafb: pmi: ports = 4010 4016 4054 4038 403c 405c 4000 4004 40b0 40b2 40b4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'eclipse'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 262144k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (31 C)
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:1e.3[A] -> GSI 22 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3c40-0x3c47, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: ST9100822A, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x80b1, caps: 0xa04713/0x20040a
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
hdb: TSSTcorpCD/DVDW TS-L532L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 > hda4
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
i2c /dev entries driver
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.3 (8183 buckets, 65464 max) - 216 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding 257000k swap on /dev/hda5. Priority:-1 extents:1 across:257000k
NTFS driver 2.1.24 [Flags: R/O MODULE].
NTFS volume version 3.1.
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 58231 usecs
intel8x0: clocking to 48000
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
ndiswrapper version 1.7 loaded (preempt=yes,smp=yes)
ndiswrapper: driver bcmwl5 () loaded
PCI: Enabling device 0000:0b:03.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:0b:03.0[A] -> GSI 17 (level, low) -> IRQ 19
ndiswrapper: using irq 19
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:90:4b:a6:72:a2 using driver bcmwl5, 14E4:4320:103C:12FA.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
|
glxinfo
| Quote: |
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier,
GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
GL_HP_occlusion_test, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
|
What am I doing wrong? |
|
| Back to top |
|
|
Iluminatus
Tux's lil' helper
Joined: 13 Nov 2004
Posts: 93
Location: Maia/Portugal
|
| Posted: Thu Dec 29, 2005 2:17 pm Post subject: |
|
|
You are not doing nothing wrong probaly your card isn't supported yet.
By the way if you notest your error is about the ram in your card not being properly detected.
Last commit in cvs appears, to revert some changes made, that make xorg doesn't recognyze memory in grapihc board.
Give it a try, 
But if it didn't work don't be surprise :X |
|
| Back to top |
|
|
Tommy Vercetti
n00b
Joined: 30 Aug 2005
Posts: 59
|
| Posted: Sat Dec 31, 2005 6:00 pm Post subject: |
|
|
Just followed the howto, using a 6.9 xorg ebuild from https://forums.gentoo.org/viewtopic-t-396898.html
I am on amd64 and have a 9600XT board
Can't manage to get direct rendering
What information would be important that i sent so as to you know what the problem may be?
_________________
AMD Athlon 64 3200+ 939
ASUS A8V Deluxe
1GB Corsair Dual Channel
ATI Radeon 9600 XT 128MB Gigabyte 500/600
120GB Maxtor
200GB WD |
|
| Back to top |
|
|
Iluminatus
Tux's lil' helper
Joined: 13 Nov 2004
Posts: 93
Location: Maia/Portugal
|
| Posted: Sun Jan 01, 2006 5:00 am Post subject: |
|
|
Xorg.log
Dmesg
LIBGL_DEBUG=verbose glxinfo
At least this three.
P.S:
Check links, in your mesa-cvs dir, to extensions and include |
|
| Back to top |
|
|
aj2r
l33t
Joined: 11 Sep 2005
Posts: 705
Location: Granada/Andalucía/España
|
| Posted: Sun Jan 01, 2006 3:31 pm Post subject: |
|
|
I have continued investigating and already I have DRI!!!!!
I tell you, has been enough to me with modifying the files:
***Updated***
/usr/src/r300/drm/linux-core/drm_pciids.h
| Code: |
#define radeon_PCI_IDS \
{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|CHIP_IS_IGP}, \
{0x1002, 0x4137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP}, \
.........................
{0x1002, 0x5e4b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY|CHIP_IS_PCIE}, \ //Added by me
{0, 0, 0}
...........
|
/usr/src/r300/drm/linux-core/radeon_drv.h
| Code: |
#define DRIVER_PATCHLEVEL 0
enum radeon_family {
CHIP_R100,
.............
CHIP_R420,
CHIP_RV380, //Added by me
CHIP_LAST,
};
enum radeon_cp_microcode_version {
UCODE_R100,
..............
|
/usr/src/r300/Mesa/src/mesa/drivers/dri/radeon/radeon_chipset.h
| Code: |
................
#define PCI_CHIP_RV280_5C61 0x5C61
#define PCI_CHIP_RV280_5C63 0x5C63
#define PCI_CHIP_RV380_3150 0x3150 //Added by me
enum {
CHIP_FAMILY_R100,
CHIP_FAMILY_RV100,
.................
|
/usr/src/r300/Mesa/src/mesa/drivers/dri/radeon/radeon_screen.c
| Code: |
...........
case PCI_CHIP_RV370_5B60:
case PCI_CHIP_RV370_5B62:
case PCI_CHIP_RV370_5B64:
case PCI_CHIP_RV370_5B65:
case PCI_CHIP_RV380_3150: //Added by me
screen->chip_family = CHIP_FAMILY_RV380;
screen->chip_flags = RADEON_CHIPSET_TCL;
break;
case PCI_CHIP_R420_JN:
case PCI_CHIP_R420_JH:
..............
|
/usr/src/r300/Mesa/src/mesa/drivers/dri/radeon/server/radeon_dri.c
| Code: |
info->ChipFamily = CHIP_FAMILY_RV280;
break;
case PCI_CHIP_R300_ND:
case PCI_CHIP_R300_NE:
case PCI_CHIP_R300_NF:
case PCI_CHIP_R300_NG:
case PCI_CHIP_RV380_3150: //Added by me
info->ChipFamily = CHIP_FAMILY_R300;
break;
default:
/* Original Radeon/7200 */
info->ChipFamily = CHIP_FAMILY_RADEON;
}
|
What happens it is that far from it it approaches frames per second that with himself with fglrx (thing that on the other hand hoped) but my tests have been to tuxracer and glxgears, and glxgears is not very trustworthy since I such obtain FPS with DRI that without DRI although is observed yield with DRI much more.
My questions are these:
1. There is some tool to prove the yield?
2. What is necessary to make to inform to the developers of DRI for r300 of my results and that include my small changes in the CVS?
Thanks and HAPPY YEAR!
Last edited by aj2r on Thu Feb 23, 2006 1:52 pm; edited 3 times in total |
|
| Back to top |
|
|
Iluminatus
Tux's lil' helper
Joined: 13 Nov 2004
Posts: 93
Location: Maia/Portugal
|
| Posted: Sun Jan 01, 2006 4:04 pm Post subject: |
|
|
Congrats for resolving your problem, to notify, r300 devel you could:
- fill a bugzilla, at bugs.freedesktop.org
- Or subscribe at dri-devel mailing list (http://sourceforge.net/mail/?group_id=387), and send your patchs to dri-devel
By the way, try to put the xorg,conf options that appear in the tutorial and add also, the lib_dxtn (see in anteriror posts), and try to put in Xorg.conf
Option "ColorTiling" "True"
Happy New Year... |
|
| Back to top |
|
|
skrionius
n00b
Joined: 15 Nov 2004
Posts: 16
|
| Posted: Sun Jan 01, 2006 7:32 pm Post subject: |
|
|
r300 dri and software suspend2.
Does anyone has experiment with that?
Latest suspend2 rc14 and rc15 doesnt work for me neither with kernel 2.6.14 and 2.6.15-rc7.
What do you think, what packages should I recompile and reinstall in X and DRI related drivers,
anything (??) if I change kernel version? What depends on it? I fear that some kernel depending
X part or DRI part is making my suspend2 broken! So any ideas, what reinstall should I do to
make it work again?
With suspend2 rc13 it works well with DRI and suspend/resume with suspend2, rc14 and rc15 suspend2
only works without DRI enabled... so I suspect some dependency problem arose
because of the kernel upgrade. Any help appreciated! |
|
| Back to top |
|
|
Tommy Vercetti
n00b
Joined: 30 Aug 2005
Posts: 59
|
| Posted: Sun Jan 01, 2006 10:56 pm Post subject: |
|
|
Aftter a twice emerge -e world, and nothing more, I managed to get direct rendering
The performance is a third of the closed-source drivers, but I don't think I need more performance than this right now. Will test more and post here.
_________________
AMD Athlon 64 3200+ 939
ASUS A8V Deluxe
1GB Corsair Dual Channel
ATI Radeon 9600 XT 128MB Gigabyte 500/600
120GB Maxtor
200GB WD |
|
| Back to top |
|
|
Tommy Vercetti
n00b
Joined: 30 Aug 2005
Posts: 59
|
| Posted: Mon Jan 02, 2006 12:32 am Post subject: |
|
|
I tested composite, and the performance is very weak. I am using kde 3.5.
no change on glxgears performance with composite on or off
How is composite's performance on your computers?
_________________
AMD Athlon 64 3200+ 939
ASUS A8V Deluxe
1GB Corsair Dual Channel
ATI Radeon 9600 XT 128MB Gigabyte 500/600
120GB Maxtor
200GB WD |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Mon Jan 02, 2006 7:35 am Post subject: |
|
|
| Tommy Vercetti wrote: | I tested composite, and the performance is very weak. I am using kde 3.5.
no change on glxgears performance with composite on or off
How is composite's performance on your computers? |
Render is not yet accelerated in the r300 driver.
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
Iluminatus
Tux's lil' helper
Joined: 13 Nov 2004
Posts: 93
Location: Maia/Portugal
|
| Posted: Mon Jan 02, 2006 2:15 pm Post subject: |
|
|
| More DRM changes, time for PCIExpress users try it again. I must admit that much has to be done yet, but give it another try. |
|
| Back to top |
|
|
Master_of_Puppets
n00b
Joined: 17 Dec 2005
Posts: 48
Location: Austria
|
| Posted: Mon Jan 02, 2006 2:22 pm Post subject: |
|
|
| Iluminatus wrote: | | More DRM changes, time for PCIExpress users try it again. I must admit that much has to be done yet, but give it another try. |
Uh, good news, I'll try it!
greets
EDIT: still doesn't work for my Mobility Radeon X700 PCIExpress card 
_________________
There are only 10 kinds of people in the world, those who understand binary and those who don't. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Unsupported Software
