Robstar Tux's lil' helper
Joined: 06 Apr 2007 Posts: 91 Location: Milton Keynes
|
Posted: Fri Jun 01, 2007 4:12 pm Post subject: SCSI generic enable no dvdrom |
|
|
I have to dvd roms. One is a writer and the other is a reader (cousr the writer can read and write). When I enable SCSI genric suppot and LUNS for my multicard reader my dvdrom doesn't work.
This is what I used to get my card reader working.
http://gentoo-wiki.com/HOWTO_Multicard_reader
Another thing I have notice is that my usb harddrive doesn't mount probaly atupmaticaly but works manually.
dmesg:
Code: |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: PIONEER DVD RW DVR-109, ATAPI CD/DVD-ROM drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000090b9fa]
hdb: H-DTSDDDRM, ATAPI CD/DVD-ROM drive
hdb: set_drive_speed_status: status=0x41 { DriveReady Error }
hdb: set_drive_speed_status: error=0x00 { }
hdb: set_drive_speed_status: status=0x41 { DriveReady Error }
hdb: set_drive_speed_status: error=0x00 { }
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: ATAPI CD-ROM drive, 0kB Cache, UDMA(33)
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
hdb: status error: status=0x41 { DriveReady Error }
hdb: status error: error=0x00 { }
ide: failed opcode was: unknown
|
Thanks for any help in advance _________________ Please put [SOLVED] when you've found the solution. It makes everyone's lives easier.
From FreeBSD to Gentoo. Now lets have ago at Arch. (It's just not the same)
My Quote: Yes, I know I am a geek. Your just pointing out the obvious. |
|